IMPROVEMENT OF CAVITATION SURGE IN A DOUBLE SUCTION CENTRIFUGAL PUMP BY USE OF CFD

被引:0
|
作者
Kagawa, Shusaku [1 ]
Matsushita, Naoki [1 ]
机构
[1] EBARA CORP, 78-1 Shintomi, Futtsu, Chiba 2930011, Japan
关键词
D O I
暂无
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
This paper discussed about suppressions of cavitation surge in a double suction centrifugal pump. In order to suppress the cavitation surge, CFD simulation was carried out. Cavitation surge was observed near the best efficiency point, and it was difficulty to operate the pump stably. The specific speed of the tested pump was about 81 [m3/min, min(-1), m] or 533 [ft., USGPM, In general, the main cause of the cavitation surge is inlet reverse flows at the impeller inlet. In order to prevent the inlet reverse flow, two kinds of modification at the impeller inlet were applied. One was the reduction of impeller inlet area by using a suction ring, and the other was the reduction of impeller inlet diameter. To reduce the computational time, in CFD model, a half of the double suction centrifugal pump was modeled. CFD simulations were carried out using ANSYS CFX with the Rayleigh Preset cavitation model. It was confirmed that the head fluctuation caused by the cavitation phenomena was predicted qualitatively by use of unsteady CFD simulation in the original pump impeller. The head fluctuation was about the 16% of the time averaged head and the very low frequency was confirmed by the FFT analysis. In addition, the relationship between head characteristics and cavitation behavior was observed clearly. The objective of the suction ring was to eliminate the head fluctuations caused by the cavitation. It was concluded that the suction ring was very effective to prevent the cavitation surge. On the other hand, the decrease of impeller inlet diameter was effective to reduce the head fluctuations, which became half of that for the original pump impeller. As a result, it was suggested that the complete suppression of the cavitation surge by the reduction of impeller inlet diameter was difficult in this case. It was concluded that unsteady CFD simulations with cavitation model is very effective for clarification of the impeller inlet modification on the cavitation surge.
引用
收藏
页数:6
相关论文
共 50 条
  • [21] Effect of Suppressing Cavitation of Rough Zone on Suction Surface of Centrifugal Pump Blade
    Zhao W.
    Li Q.
    Kang Y.
    Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery, 2021, 52 (06): : 169 - 176and214
  • [22] Effects of different structures of blade suction surface on cavitation initiation of centrifugal pump
    Zhao W.
    Kang Y.
    Li Q.
    Xue Z.
    Zhendong yu Chongji/Journal of Vibration and Shock, 2022, 41 (07): : 23 - 30
  • [23] Improvement of Cavitation Characteristics of Centrifugal Pump by Balanced Hole Offset
    Wang D.
    Liu Z.
    Zhao W.
    Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery, 2020, 51 (05): : 142 - 150
  • [24] Vortex cavitation and oscillation in a double-suction volute pump
    Sato, T.
    Nagahara, T.
    Tanaka, K.
    Fuchiwaki, M.
    Shimizu, F.
    25TH IAHR SYMPOSIUM ON HYDRAULIC MACHINERY AND SYSTEMS, 2010, 12
  • [25] Design and flow simulation for a centrifugal pump with double suction impeller
    Nastase, Eugen-Vlad
    22ND INTERNATIONAL CONFERENCE ON INNOVATIVE MANUFACTURING ENGINEERING AND ENERGY - IMANE&E 2018, 2018, 178
  • [26] Numerical Simulation of Centrifugal Pump with Double-Suction Impeller
    An, Young-Joon
    Shin, Byeong Rog
    10TH ASIAN INTERNATIONAL CONFERENCE ON FLUID MACHINERY, 2010, 1225 : 456 - 464
  • [27] Multi-objective optimization of double suction centrifugal pump
    Tao, Ran
    Xiao, Ruofu
    Zhu, Di
    Wang, Fujun
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2018, 232 (06) : 1108 - 1117
  • [28] Artificial Neural Networks Approach for a Multi-Objective Cavitation Optimization Design in a Double-Suction Centrifugal Pump
    Wang, Wenjie
    Osman, Majeed Koranteng
    Pei, Ji
    Gan, Xingcheng
    Yin, Tingyun
    PROCESSES, 2019, 7 (05)
  • [29] RANS CFD Analysis of Hump Formation Mechanism in Double-Suction Centrifugal Pump under Part Load Condition
    Liu, Yong
    Wang, Dezhong
    Ran, Hongjuan
    Xu, Rui
    Song, Yu
    Gong, Bo
    ENERGIES, 2021, 14 (20)
  • [30] The suction effect of the centrifugal pump
    Schmidt, P
    ZEITSCHRIFT DES VEREINES DEUTSCHER INGENIEURE, 1927, 71 : 81 - 84