Multi-objective optimization for the aerodynamic noise of the high-speed train in the near and far field based on the improved NSGA-II algorithm

被引:9
|
作者
Yuan, Chun Yan [1 ]
Li, Ming Qing [2 ]
机构
[1] Changan Univ, Dept Civil Engn, Xian 710064, Shaanxi, Peoples R China
[2] Changan Univ, Dept Mech Engn, Xian 710064, Shaanxi, Peoples R China
关键词
high-speed train; train head; aerodynamic noises; large eddy simulation; boundary element method; vortex shape; LARGE-EDDY SIMULATION; DIPOLE SOUND SOURCE; NUMERICAL-ANALYSIS; PREDICTION; DRAG;
D O I
10.21595/jve.2017.18526
中图分类号
R318 [生物医学工程];
学科分类号
0831 ;
摘要
With the increased running speed of trains, the aerodynamic noise of trains becomes increasingly obvious. Reducing aerodynamic noises has become one of keys to controlling the noise of high-speed trains. This paper conducted a numerical simulation on the aerodynamic noise of head of the high-speed train. Firstly, this paper established a mathematical-physical model for the three-dimensional turbulent flow field of a high-speed train, adopted standard k-epsilon equation turbulent model and broadband noise source model to compute the aerodynamic noise sources of the high-speed train and applied three-dimensional transient large eddy simulation (LES) to compute the external unsteady flow field of the high-speed train after obtaining noise sources. Based on the unsteady flow field, then this paper applied FW-H equations to compute the far-field aerodynamic noise of the high-speed train. After obtaining the unsteady fluctuation pressure on the surface of the train, this paper computed the radiation characteristics of aerodynamic noises around the high-speed train based on the boundary element method (BEM). Researched results showed: The main aerodynamic noise sources of the high-speed train were at the nose tip of head train; fluid separation and recombination were main reasons for the aerodynamic noise of the highspeed train; vortexes in the position of head train were striped and horseshoe-shaped or hairpin vortexes were mainly in the area of tail train; in addition, vortexes were symmetrically distributed along the longitudinal symmetry plane of train; dipole noises were mainly distributed in the area of head train, whose main energy was decreased with the increased frequency; the quadrupole noise of aerodynamic noises of the high-speed train was mainly distributed in the wake flow area of tail train; when the high-speed train ran at the speed of 300 km/ h, the maximum sound pressure level of far-field observation points was 76.8 dB; additionally, aerodynamic noises in the far field were mainly a broadband noise, whose main energy was within the frequency range of 1250 Hz to 3150 Hz. Finally, the improved NSGA-II algorithm was used to conduct a multi-objective optimization for the head shape. The aerodynamic drag of the high-speed train could be most reduced by 6.74 %, and the dipole aerodynamic noise source could be most reduced by 8.34 dB. The improved NSGA-II algorithm has an obvious effect on the multi-objective optimization of the head shape.
引用
收藏
页码:4759 / 4782
页数:24
相关论文
共 50 条
  • [41] Improved NSGA-II multi-objective genetic algorithm based on hybridization-encouraged mechanism
    School of Automation Science and Electrical Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100191, China
    Chin J Aeronaut, 2008, 6 (540-549):
  • [42] Research on Multi-Objective Optimization Methods of Urban Rail Train Automatic Driving Based on NSGA-II
    Chen, Xiaoqiang
    Meng, Jianjun
    Xu, Ruxun
    Li, Decang
    Yang, Haobo
    ELECTRONICS, 2024, 13 (19)
  • [43] Multi-objective optimization of a composite orthotropic bridge with RSM and NSGA-II algorithm
    Xiang, Ze
    Zhu, Zhiwen
    JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 2022, 188
  • [44] Improved NSGA-II Multi-objective Genetic Algorithm Based on Hybridization-encouraged Mechanism
    Sun Yijie
    Shen Gongzhang
    CHINESE JOURNAL OF AERONAUTICS, 2008, 21 (06) : 540 - 549
  • [45] Multi-Objective Optimization for Parameters of Energy Management Strategy of HEV Based on Improved NSGA-II
    Hu Fei
    Zhao Zhiguo
    APPLIED MECHANICS AND MECHANICAL ENGINEERING, PTS 1-3, 2010, 29-32 : 912 - 917
  • [46] Multi-Objective Optimization Design of a Notch Filter Based on Improved NSGA-II for Conducted Emissions
    Zhang, Lu
    Ge, Hongjuan
    Ma, Ying
    Xue, Jianliang
    Li, Huang
    Pecht, Michael
    IEEE ACCESS, 2020, 8 : 83213 - 83223
  • [47] Research on Multi-Objective Optimization Model of Foundation Pit Dewatering Based on NSGA-II Algorithm
    Ma, Zhiheng
    Wang, Jinguo
    Zhao, Yanrong
    Li, Bolin
    Wei, Yufeng
    APPLIED SCIENCES-BASEL, 2023, 13 (19):
  • [48] Research on Multi-objective Optimization Model of Power Storage Materials Based on NSGA-II Algorithm
    Hu, Zixi
    Liu, Shuang
    Yang, Fan
    Geng, Xiaodong
    Huo, Xiaodi
    Liu, Jia
    INTERNATIONAL JOURNAL OF COMPUTATIONAL INTELLIGENCE SYSTEMS, 2024, 17 (01)
  • [49] Multi-objective optimization model for blast furnace production and ingredients based on NSGA-II algorithm
    Hua C.
    Wang Y.
    Li J.
    Tang Y.
    Lu Z.
    Guan X.
    Huagong Xuebao/CIESC Journal, 2016, 67 (03): : 1040 - 1047
  • [50] Research on Multi-objective Optimization Model of Power Storage Materials Based on NSGA-II Algorithm
    Zixi Hu
    Shuang Liu
    Fan Yang
    Xiaodong Geng
    Xiaodi Huo
    Jia Liu
    International Journal of Computational Intelligence Systems, 17