Multi-objective optimization for the aerodynamic noise of the high-speed train in the near and far field based on the improved NSGA-II algorithm

被引:9
|
作者
Yuan, Chun Yan [1 ]
Li, Ming Qing [2 ]
机构
[1] Changan Univ, Dept Civil Engn, Xian 710064, Shaanxi, Peoples R China
[2] Changan Univ, Dept Mech Engn, Xian 710064, Shaanxi, Peoples R China
关键词
high-speed train; train head; aerodynamic noises; large eddy simulation; boundary element method; vortex shape; LARGE-EDDY SIMULATION; DIPOLE SOUND SOURCE; NUMERICAL-ANALYSIS; PREDICTION; DRAG;
D O I
10.21595/jve.2017.18526
中图分类号
R318 [生物医学工程];
学科分类号
0831 ;
摘要
With the increased running speed of trains, the aerodynamic noise of trains becomes increasingly obvious. Reducing aerodynamic noises has become one of keys to controlling the noise of high-speed trains. This paper conducted a numerical simulation on the aerodynamic noise of head of the high-speed train. Firstly, this paper established a mathematical-physical model for the three-dimensional turbulent flow field of a high-speed train, adopted standard k-epsilon equation turbulent model and broadband noise source model to compute the aerodynamic noise sources of the high-speed train and applied three-dimensional transient large eddy simulation (LES) to compute the external unsteady flow field of the high-speed train after obtaining noise sources. Based on the unsteady flow field, then this paper applied FW-H equations to compute the far-field aerodynamic noise of the high-speed train. After obtaining the unsteady fluctuation pressure on the surface of the train, this paper computed the radiation characteristics of aerodynamic noises around the high-speed train based on the boundary element method (BEM). Researched results showed: The main aerodynamic noise sources of the high-speed train were at the nose tip of head train; fluid separation and recombination were main reasons for the aerodynamic noise of the highspeed train; vortexes in the position of head train were striped and horseshoe-shaped or hairpin vortexes were mainly in the area of tail train; in addition, vortexes were symmetrically distributed along the longitudinal symmetry plane of train; dipole noises were mainly distributed in the area of head train, whose main energy was decreased with the increased frequency; the quadrupole noise of aerodynamic noises of the high-speed train was mainly distributed in the wake flow area of tail train; when the high-speed train ran at the speed of 300 km/ h, the maximum sound pressure level of far-field observation points was 76.8 dB; additionally, aerodynamic noises in the far field were mainly a broadband noise, whose main energy was within the frequency range of 1250 Hz to 3150 Hz. Finally, the improved NSGA-II algorithm was used to conduct a multi-objective optimization for the head shape. The aerodynamic drag of the high-speed train could be most reduced by 6.74 %, and the dipole aerodynamic noise source could be most reduced by 8.34 dB. The improved NSGA-II algorithm has an obvious effect on the multi-objective optimization of the head shape.
引用
收藏
页码:4759 / 4782
页数:24
相关论文
共 50 条
  • [31] Research Progress of Aerodynamic Multi-Objective Optimization on High-Speed Train Nose Shape
    Dai, Zhiyuan
    Li, Tian
    Zhang, Weihua
    Zhang, Jiye
    CMES-COMPUTER MODELING IN ENGINEERING & SCIENCES, 2023, 137 (02): : 1461 - 1489
  • [32] Multi-objective optimization of turbomachinery using improved NSGA-II and approximation model
    Wang, X. D.
    Hirsch, C.
    Kang, Sh.
    Lacor, C.
    COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING, 2011, 200 (9-12) : 883 - 895
  • [33] Multi-objective optimization of power system reconstruction based on NSGA-II
    Wang, Hongtao
    Liu, Yutian
    Dianli Xitong Zidonghua/Automation of Electric Power Systems, 2009, 33 (23): : 14 - 18
  • [34] Multi-Objective Robust Optimization Based on NSGA-II and Degree of Robustness
    Qiang, Jie
    Qi, Rongbin
    Qian, Feng
    2010 8TH WORLD CONGRESS ON INTELLIGENT CONTROL AND AUTOMATION (WCICA), 2010, : 4859 - 4864
  • [35] Multi-objective configuration optimization of modularized product based on NSGA-II
    State Key Lab. of CAD and CG, Zhejiang University, Hangzhou 310027, China
    Jisuanji Jicheng Zhizao Xitong, 2007, 11 (2092-2098+2161):
  • [36] Multi-objective optimization of liquid metal bearing based on NSGA-II
    Tang, Siwei
    Zhang, Guohua
    Zheng, Yueqing
    Xie, Gongnan
    Cui, Hailong
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2025, 239 (02) : 151 - 162
  • [37] Multi-Objective Aerodynamic Optimization of a High-Speed Train Head Shape Based on an Optimal Kriging Model
    Yang, Y.
    He, Z.
    Shi, Z.
    Xiong, X. H.
    JOURNAL OF APPLIED FLUID MECHANICS, 2022, 15 (03) : 803 - 813
  • [38] Multi-objective Optimization for AUV Conceptual Design Based on NSGA-II
    Xia, Guoqing
    Liu, Caiyun
    Chen, Xinghua
    OCEANS 2016 - SHANGHAI, 2016,
  • [39] A Developed NSGA-II Algorithm for Multi-objective Chiller Loading Optimization Problems
    Duan, Pei-yong
    Wang, Yong
    Sang, Hong-yan
    Wang, Cun-gang
    Qi, Min-yong
    Li, Jun-qing
    INTELLIGENT COMPUTING THEORIES AND APPLICATION, ICIC 2016, PT I, 2016, 9771 : 489 - 497
  • [40] Multi-objective optimization of FCC separation system based on NSGA-II
    Liu, Yingjie
    Chu, Menghao
    Ye, Qing
    Li, Jinlong
    Han, Deqiu
    CHEMICAL ENGINEERING SCIENCE, 2025, 302