Residual Stress Distribution Caused by Laser Hardening and Conventional Quenching in Plain Carbon Steel

被引：3
|
作者：
Filep, A. [1 ]
Benke, M. [2 ]
Mertinger, V. [1 ]
Buza, G. [3 ]
机构：
[1] Univ Miskolc, Inst Phys Met Metalforming & Nanotechnol, H-3515 Miskolc, Hungary
[2] Univ Miskolc, MTA ME Mat Sci Res Grp, Miskolc, Hungary
[3] Bay Zoltan Appl Res Nonprofit Ltd, Dept Laser Technol, H-1116 Budapest, Hungary
来源：
RESIDUAL STRESSES IX | 2014年 / 996卷
关键词：
laser hardening; residual stress measurement; X-ray diffraction;
D O I：
10.4028/www.scientific.net/AMR.996.538
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Heat transfer during laser hardening occurs from the surface towards the bulk in contrast to conventional quenching, where it occurs from the bulk towards the surrounding. The residual stress distributions due to laser hardening and conventional quenching of plain carbon steel samples were measured using X-ray diffraction. The effect of changing the treatment parameters, that is laser power and feed rate, was examined on the resulting stress distribution. The relationship between the measured stress distribution and the evolved microstructure is established.
引用
收藏
页码：538 / +
页数：2
相关论文
共 50 条
  • [31] Surface Laser Quenching as an Alternative Method for Conventional Quenching and Tempering Treatment of 1538 MV Steel
    Carrera-Espinoza, R.
    Valerio, A. Roja
    Villasana, J. del Prado
    Hernandez, J. A. Yescas
    Moreno-Garibaldi, P.
    Cruz-Gomez, M. A.
    Lopez, U. Figueroa
    ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2020, 2020
  • [32] ON THE EFFECT OF ISOTHERMAL HARDENING AND SIZE ON THE RESIDUAL STRESS OF CARBURIZED AND QUENCHED STEEL
    1600,
  • [33] Expressions for predicting the residual stress in surface induction hardening of steel bars
    Xu, DH
    Li, ZH
    Luo, JX
    MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING, 1996, 4 (01) : 111 - 122
  • [34] Effect of post carburizing treatments on residual stress distribution in plain carbon and alloy steels - a numerical analysis
    Pavan, Hiremath
    Sathyashankara, Sharma
    Gowrishankar, M. C.
    Manjunath, Shettar
    Gurumurthy, B. M.
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2020, 9 (04): : 8439 - 8450
  • [35] SOLID-SOLUTION HARDENING AND SOFTENING OF AUSTENITE IN PLAIN CARBON-STEEL
    SAKAI, T
    XU, Z
    ZHANG, GR
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1994, 80 (07): : 557 - 561
  • [36] Residual stress distribution in carbon steel pipe welded joint measured by neutron diffraction
    Hayashi, M
    Ishiwata, M
    Morii, Y
    Minakawa, N
    Root, JH
    MATERIALS SCIENCE RESEARCH INTERNATIONAL, 2000, 6 (04): : 287 - 294
  • [37] Influence of Surface Pretreatment on Residual Stress Field of Heat-Treated Steel Induced by Laser Local Quenching
    Sakaida, Yoshihisa
    Sasaki, Yuki
    Owashi, Haruo
    RESIDUAL STRESSES 2018, ECRS-10, 2018, 6 : 177 - 182
  • [38] RESIDUAL STRESS IN THE WHEEL OF 42CrMo STEEL DURING QUENCHING
    Li Yongkui
    Chen Jundan
    Lu Shanping
    ACTA METALLURGICA SINICA, 2014, 50 (01) : 121 - 128
  • [39] 3D FEM simulation of steel quenching and investigation of the effect of asymmetric geometry on residual stress distribution
    Simsir, Caner
    Gur, C. Hakan
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2008, 207 (1-3) : 211 - 221
  • [40] Numerical simulation of transient and residual stresses caused by laser hardening of slender elements
    Bokota, A
    Iskierka, S
    COMPUTATIONAL MATERIALS SCIENCE, 1997, 7 (04) : 366 - 376
12345