Residual Stress Distribution Caused by Laser Hardening and Conventional Quenching in Plain Carbon Steel

被引：3

作者：

Filep, A. ^{[1
]}

Benke, M. ^{[2
]}

Mertinger, V. ^{[1
]}

Buza, G. ^{[3
]}

机构：

[1] Univ Miskolc, Inst Phys Met Metalforming & Nanotechnol, H-3515 Miskolc, Hungary

[2] Univ Miskolc, MTA ME Mat Sci Res Grp, Miskolc, Hungary

[3] Bay Zoltan Appl Res Nonprofit Ltd, Dept Laser Technol, H-1116 Budapest, Hungary

来源：

RESIDUAL STRESSES IX | 2014年 / 996卷

关键词：

laser hardening; residual stress measurement; X-ray diffraction;

D O I：

10.4028/www.scientific.net/AMR.996.538

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Heat transfer during laser hardening occurs from the surface towards the bulk in contrast to conventional quenching, where it occurs from the bulk towards the surrounding. The residual stress distributions due to laser hardening and conventional quenching of plain carbon steel samples were measured using X-ray diffraction. The effect of changing the treatment parameters, that is laser power and feed rate, was examined on the resulting stress distribution. The relationship between the measured stress distribution and the evolved microstructure is established.

引用

页码：538 / +

页数：2

共 50 条

[21] Residual Stress Distribution in Hardened Case Layer of Cr-Mo Steel after Carburizing and Quenching
Sakaida, Yoshihisa
Yamashita, Shohei
Manzanka, Michiya
RESIDUAL STRESSES VIII, 2011, 681 : 346 - +
[22] Correction to: On the Influence of Surface Hardening Treatments on Microstructure Evolution and Residual Stress in Microalloyed Medium Carbon Steel
Andreas Fischer
Berthold Scholtes
Thomas Niendorf
Journal of Materials Engineering and Performance, 2022, 31 : 3407 - 3407
[23] Influence of Carbon Content on Strain Hardening Behaviour of Sintered Plain Carbon Steel Preforms
S Narayan
A Rajeshkannan
Journal of Iron and Steel Research(International), 2011, 18 (09) : 33 - 40
[24] A study on the distribution of residual stress due to surface induction hardening
Xu, DH
Kuang, ZB
JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 1996, 118 (04): : 571 - 575
[25] Micro hardening of carbon steel with a direct diode laser
Morimoto, Junji
Katoh, Yutaka
Fukuhara, Shinji
Abe, Nobuyuki
Tsukamoto, Masahiro
Tanaka, Shigeru
HEAT TREATMENT OF MATERIALS, 2006, 118 : 197 - +
[26] Residual stress in laser bent steel components
Topic, M.
Bucher, R.
Vorster, W.
Zhang, S. Y.
McGrath, P.
Korsunsky, A. M.
RESIDUAL STRESSES VII, 2006, 524-525 : 299 - 304
[27] Monitoring of Laser Quenching of the Carbon Steel by Acoustic Emission
Yasuda, Takeshi
Kaisho, Makoto
Nishimoto, Koji
Okumoto, Yoshihiro
MATERIALS TRANSACTIONS, 2023, 64 (02) : 604 - 612
[28] Monitoring of Laser Quenching of the Carbon Steel by Acoustic Emission
Yasuda, Takeshi
Kaisho, Makoto
Nishimoto, Koji
Okumoto, Yoshihiro
JOURNAL OF THE JAPAN INSTITUTE OF METALS AND MATERIALS, 2020, 84 (11) : 335 - 343
[29] MODELING QUENCHING TO PREDICT RESIDUAL-STRESS AND MICROSTRUCTURE DISTRIBUTION
LI, YY
CHEN, Y
JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 1988, 110 (04): : 372 - 379
[30] INFLUENCE OF THE RESIDUAL-STRESSES ON THE STRENGTH CHARACTERISTICS OF STEEL BY LASER HARDENING
GURKOVSKY, SS
JOURNAL OF MATERIALS SCIENCE LETTERS, 1991, 10 (09) : 491 - 493

← 1 2 3 4 5 →