Research on the design of motion control system based on a novel 5-DOF PCMM

被引：0
|
作者：
Chen, Xiulong [1 ]
Hu, Gang [2 ]
Jiang, Xueyan [3 ]
Wei, Deyong [1 ]
Zhao, Yongsheng [4 ]
机构：
[1] Shandong Univ Sci & Technol, Coll Mech & Elect Engn, Qingdao 266510, Peoples R China
[2] Shandogn Water Polytech, Dept Mech & Elect Engn, Rizhao 276826, Peoples R China
[3] Weifang Vocat Coll, Dept Mech & Elect Engn, Weifang, Peoples R China
[4] Yanshan Univ, Coll Mech Engn, Qinhuangdao 066004, Peoples R China
来源：
APPLIED MECHANICS AND MECHANICAL ENGINEERING, PTS 1-3 | 2010年 / 29-32卷
关键词：
5-Degree of Freedom; parallel coordinate measuring machine; motion control;
D O I：
10.4028/www.scientific.net/AMM.29-32.2296
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
A novel 5-Degree of Freedom PCMM (parallel coordinate measuring machine) was proposed, and its motion control system was designed. Compared with the other structural PCMMs, the structure feature of proposed PCMM was described. Then its motion control system was designed with the modularized and open architecture. The controlled scheme of hardware, which based on PC, PMAC motion control card and the precision measuring probe, was developed. The software of the motion control system was written by Visual Basic6.0 language. Finally, the process of motion control for 4-UPS-UPU PCMM was proposed. The new method above for design of motion control system is simple and effective, and may be applied to other parallel machine.
引用
收藏
页码：2296 / +
页数：2
相关论文
共 50 条
  • [31] Dynamics analysis of a novel 5-DOF hybrid manipulator
    Li, Ruifeng
    Guo, Wanjin
    Cao, Chuqing
    Huazhong Keji Daxue Xuebao (Ziran Kexue Ban)/Journal of Huazhong University of Science and Technology (Natural Science Edition), 2015, 43 : 32 - 36
  • [32] Kinematics analysis of a novel 5-DOF hybrid manipulator
    State Key Laboratory of Robotics and System, Harbin Institute of Technology, 92 West Dazhi Street, Nan Gang District, Harbin
    150001, China
    不详
    210094, China
    不详
    241007, China
    不详
    Int. J. Autom. Technol., 6 (765-774):
  • [33] Statics Analysis of a Novel 5-DOF Parallel Manipulator
    Li, Yanbiao
    Ji, Shiming
    Wang, Zhongfei
    Zhang, Li
    Wang, Yangyu
    DIGITAL DESIGN AND MANUFACTURING TECHNOLOGY, PTS 1 AND 2, 2010, 102-104 : 311 - 315
  • [34] Development of FPGA-based system for control of an Unmanned Ground Vehicle with 5-DOF Robotic Arm
    Afaq, Abdullah
    Ahmed, Mohammad
    Kamal, Ahmed
    Masood, Umar
    Shahzaib, Muhammad
    Rashid, Nasir
    Tiwana, Mohsin
    Iqbal, Javaid
    Awan, Asadullah
    2015 15TH INTERNATIONAL CONFERENCE ON CONTROL, AUTOMATION AND SYSTEMS (ICCAS), 2015, : 724 - 729
  • [35] A Novel Method of Dexterity Analysis for a 5-DOF Manipulator
    Guo, Wanjin
    Li, Ruifeng
    Cao, Chuqing
    Gao, Yunfeng
    JOURNAL OF ROBOTICS, 2016, 2016
  • [36] VISION CONTROL OF 5-DOF MANIPULATOR FOR INDUSTRIAL APPLICATION
    Solyman, Ahmed
    Roman, Magdy
    Keshk, Afifi
    Sharshar, Karam
    INTERNATIONAL JOURNAL OF INNOVATIVE COMPUTING INFORMATION AND CONTROL, 2016, 12 (03): : 735 - 746
  • [37] NOVEL DESIGN OF A 3T2R 5-DOF PARALLEL MANIPULATOR
    Yang, Zhongxing
    Zhang, Dan
    PROCEEDINGS OF THE ASME INTERNATIONAL DESIGN ENGINEERING TECHNICAL CONFERENCES AND COMPUTERS AND INFORMATION IN ENGINEERING CONFERENCE, 2019, VOL 5B, 2020,
  • [38] State-feedback decoupling control of 5-DOF magnetic bearings based on α-order inverse system
    Cheng, Xin
    Cheng, Bai-xin
    Deng, Shuai
    Zhou, Rou-gang
    Lu, Mei-qian
    Wang, Bo
    MECHATRONICS, 2020, 68
  • [39] Contouring control of 5-DOF Manipulator Robot Arm Based on Equivalent Errors
    Nuchkrua, Thanana
    Chang, Shou-Yen
    Chen, Shyh-Leh
    2015 INTERNATIONAL AUTOMATIC CONTROL CONFERENCE (CACS), 2015, : 48 - 53
  • [40] DESIGN AND PROTOTYPE IMPLEMENTATION OF A 5-DOF MOBILE ROBOT ARM BASED ON FPGA
    Karci, Hasan
    Tangel, Ali
    JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY, 2016, 31 (02): : 295 - 302
12345