Feasibility of semi-solid die casting of ADC12 aluminum alloy

被引：33

作者：

Janudom, S. ^{[1
]}

Rattanochaikul, T. ^{[1
]}

Burapa, R. ^{[2
]}

Wisutmethangoon, S. ^{[3
]}

Wannasin, J. ^{[1
]}

机构：

[1] Prince Songkla Univ, Fac Engn, Dept Min & Mat Engn, Hat Yai 90112, Songkhla, Thailand

[2] Rajamangala Univ Technol Srivijaya, Fac Engn, Dept Ind Engn, Songkhla 90000, Thailand

[3] Prince Songkla Univ, Fac Engn, Dept Mech Engn, Hat Yai 90112, Songkhla, Thailand

来源：

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA | 2010年 / 20卷 / 09期

关键词：

ADC12 aluminum alloys; semi-solid die casting; gas induced semi-solid (GISS); rheocasting; DEFECTS; PARAMETERS; POROSITY;

D O I：

10.1016/S1003-6326(09)60370-8

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

The feasibility of semi-solid die casting of ADC12 aluminum alloy was studied. The effects of plunger speed, gate thickness, and solid fraction of the slurry on the defects were determined. The defects investigated are gas and shrinkage porosity. In the experiments, semi-solid slurry was prepared by the gas-induced semi-solid (GISS) technique. Then, the slurry was transferred to the shot sleeve and injected into the die. The die and shot sleeve temperatures were kept at 180 degrees C and 250 degrees C, respectively. The results show that the samples produced by the GISS die casting give little porosity, no blister and uniform microstructure. From all the results, it can be concluded that the GISS process is feasible to apply in the ADC12 aluminum die casting process. In addition, the GISS process can give improved properties such as decreased porosity and increased microstructure uniformity.

引用

页码：1756 / 1762

页数：7

共 50 条

[41] Slurry-based semi-solid die casting
Mendez, P.F. (pmendez@semisolid.com), 2001, ASM International (159):
[42] Slurry-based semi-solid die casting
Rice, CS
Mendez, PF
ADVANCED MATERIALS & PROCESSES, 2001, 159 (10): : 49 - 52
[43] A study of Rheomolded parts of No. 2 die casting alloy at semi-solid states
Wang, N
Wang, KK
5TH INTERNATIONAL CONFERENCE ON SEMI-SOLID PROCESSING OF ALLOYS AND COMPOSITES, PROCEEDINGS, 1998, : 521 - 528
[44] AnyCasting simulating and validating for the die casting of semi-solid ZL201 alloy
Wang Ping
Kang Hao
Shi Lifeng
Lu Guimin
Cui Jianzhong
RARE METAL MATERIALS AND ENGINEERING, 2006, 35 (06) : 880 - 884
[45] Effects of slow, shot speed of SSS die casting on microstructure and mechanical properties of aluminum alloys ADC12
Ji Lian-qing
Wu Chao
Xiong Shou-mei
Murakami, Masayuki
Matsumoto, Yoshihide
Ikeda, Shingo
VACUUM TECHNOLOGY AND SURFACE ENGINEERING - PROCEEDINGS OF THE 9TH VACUUM METALLURGY AND SURFACE ENGINEERING CONFERENCE, 2009, : 52 - +
[46] Rheo-squeeze casting of semi-solid A356 aluminum alloy slurry
毛卫民
郑秋
朱达平
Transactions of Nonferrous Metals Society of China, 2010, 20 (09) : 1769 - 1773
[47] Rheo-squeeze casting of semi-solid A356 aluminum alloy slurry
Mao Wei-min
Zheng Qiu
Zhu Da-ping
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2010, 20 (09) : 1769 - 1773
[48] Semi-solid die casting process with three steps die system
Seo, PK
Park, KJ
Kang, CG
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2004, 153 : 442 - 449
[49] The Effects of Defects on Tensile Properties of Cast ADC12 Aluminum Alloy
Okayasu, Mitsuhiro
Sakai, Hikoyuki
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2015, 46A (11): : 5418 - 5430
[50] Production of Aluminum Alloy Sealing Part by Semi Solid Die Casting Method
Ali Y.
Akdoğan A.
Vanlı A.S.
Defect and Diffusion Forum, 2022, 417 : 17 - 22

← 1 2 3 4 5 →