Feasibility of semi-solid die casting of ADC12 aluminum alloy

被引：33

作者：

Janudom, S. ^{[1
]}

Rattanochaikul, T. ^{[1
]}

Burapa, R. ^{[2
]}

Wisutmethangoon, S. ^{[3
]}

Wannasin, J. ^{[1
]}

机构：

[1] Prince Songkla Univ, Fac Engn, Dept Min & Mat Engn, Hat Yai 90112, Songkhla, Thailand

[2] Rajamangala Univ Technol Srivijaya, Fac Engn, Dept Ind Engn, Songkhla 90000, Thailand

[3] Prince Songkla Univ, Fac Engn, Dept Mech Engn, Hat Yai 90112, Songkhla, Thailand

来源：

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA | 2010年 / 20卷 / 09期

关键词：

ADC12 aluminum alloys; semi-solid die casting; gas induced semi-solid (GISS); rheocasting; DEFECTS; PARAMETERS; POROSITY;

D O I：

10.1016/S1003-6326(09)60370-8

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

The feasibility of semi-solid die casting of ADC12 aluminum alloy was studied. The effects of plunger speed, gate thickness, and solid fraction of the slurry on the defects were determined. The defects investigated are gas and shrinkage porosity. In the experiments, semi-solid slurry was prepared by the gas-induced semi-solid (GISS) technique. Then, the slurry was transferred to the shot sleeve and injected into the die. The die and shot sleeve temperatures were kept at 180 degrees C and 250 degrees C, respectively. The results show that the samples produced by the GISS die casting give little porosity, no blister and uniform microstructure. From all the results, it can be concluded that the GISS process is feasible to apply in the ADC12 aluminum die casting process. In addition, the GISS process can give improved properties such as decreased porosity and increased microstructure uniformity.

引用

页码：1756 / 1762

页数：7

共 50 条

[21] Optimization of processing parameters of cooling slope process for semi-solid casting of ADC 12 Al alloy
Sujeet Kumar Gautam
Nilrudra Mandal
Himadri Roy
Aditya Kumar Lohar
Sudip Kumar Samanta
Goutam Sutradhar
Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2018, 40
[22] Optimization of processing parameters of cooling slope process for semi-solid casting of ADC 12 Al alloy
Gautam, Sujeet Kumar
Mandal, Nilrudra
Roy, Himadri
Lohar, Aditya Kumar
Samanta, Sudip Kumar
Sutradhar, Goutam
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 2018, 40 (06)
[23] Effects of casting pressure on microstructure and mechanical properties of super slow speed die castings of ADC12 aluminum alloy
Zhuzao, 2007, 11 (1167-1170):
[24] Numerical Simulation of Semi-solid Die Casting Process of Magnesium Alloy
Hui, Yaping
Hu, Yong
ADVANCED MATERIALS AND COMPUTER SCIENCE, PTS 1-3, 2011, 474-476 : 255 - +
[25] Microstructure and Properties of Semi-solid Die Casting of High Silicon Aluminum Alloy with High Thermal Conductivity
Liu, Jin
Wu, Shusen
Zheng, Jinqiao
PROCEEDINGS OF THE SEVENTH ASIA INTERNATIONAL SYMPOSIUM ON MECHATRONICS, VOL II, 2020, 589 : 463 - 470
[26] Effect of solution time on microstructure and mechanical properties of ADC12 aluminum alloy by squeeze casting
Jiang B.
Ji Z.-S.
Hu M.-L.
Zhang Y.-B.
Wang Y.-L.
Wang S.-Z.
Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals, 2019, 29 (02): : 223 - 231
[27] Determine the Rheological Parameters for Characterization of Semi Solid Slurry of ADC12 Al Alloy
Gautam S.K.
Rajak A.
Khalkho A.
Samanta S.K.
Journal of The Institution of Engineers (India): Series C, 2023, 104 (04) : 743 - 748
[28] SEMI-SOLID ALUMINUM DIE CASTING PROCESS DESIGN FOR PREVENTING DEFECTS: POROSITY
Suslu, Yekta Berk
Acar, Mehmet Sirac
Mutlu, Muammer
Keles, Ozgul
28TH INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS (METAL 2019), 2019, : 1222 - 1229
[29] Semi-Solid Casting of Aluminum Turbocharger Impellers
Jackson, Andrew P.
Wallace, Greg R.
Midson, Stephen P.
ADVANCED MATERIALS & PROCESSES, 2010, 168 (04): : 19 - 22
[30] Semi-solid casting of aluminum turbocharger impellers
Jackson, Andrew P.
Wallace, Greg R.
Midson, Stephen P.
Advanced Materials and Processes, 2010, 168 (04): : 19 - 22

← 1 2 3 4 5 →