Recrystalised grain morphology in 9Cr 1Mo ferritic steel

被引：14
|
作者：
Mungole, M. N. [1 ]
Sahoo, Gadadhar [2 ]
Bhargava, S. [3 ]
Balasubramaniam, R. [1 ]
机构：
[1] Indian Inst Technol, Dept Mat & Met Engn, Kanpur 208016, Uttar Pradesh, India
[2] Steel Author India Ltd, R&D Ctr Iron & Steel, Ranchi 834002, Bihar, India
[3] PDPM Indian Inst Informat Technol, Jabalpur 482011, India
来源：
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2008年 / 476卷 / 1-2期
关键词：
ferritic steel; cold rolling; recrystallization-annealing; micro-hardness; tensile strength; ductility;
D O I：
10.1016/j.msea.2007.04.105
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Grain morphology in cold rolled, recrystallize-annealed 9Cr 1Mo commercial grade ferritic steel has been investigated. The recrytallization-annealing up to 100 h at 1100 K exhibited carbide particles embedded in alpha-ferrite grain matrix. The resulted grain sizes were much smaller than those of virgin sample. The heat treatment more than 100 h resulted in dual phase ferrite-martensite morphology. The recrystallization-annealing at 1300 and 1350 K changed the morphology in complete tempered martensite microstructure significantly. The hardness of martensite structure was more than that of the ferrite. The 80% cold rolled samples resulted in increase in tensile strength with significant loss in ductility after recrystallization-annealing and air cooling. (C) 2007 Elsevier B.V. All rights reserved.
引用
收藏
页码：140 / 145
页数：6
相关论文
共 50 条
  • [41] Corrosion of Modified 9Cr–1Mo Steel in Pb–17Li in a Rotating Disc Experiment at 773 K
    Poulami Chakraborty
    Vivekanand Kain
    Pankaj Kumar Pradhan
    Ram Kishen Fotedar
    Nagaiyar Krishnamurthy
    Journal of Fusion Energy, 2015, 34 : 371 - 378
  • [42] Tensile Properties Variation Across the Dissimilar Metal Weld Joint Between Modified 9Cr–1Mo Ferritic Steel and 316LN Stainless Steel at RT and 550 °C
    Karthick K.
    Malarvizhi S.
    Balasubramanian V.
    Gourav Rao A.
    Metallography, Microstructure, and Analysis, 2018, 7 (2) : 209 - 221
  • [43] A Study on the Effect of Thermal Ageing on the Specific-Heat Characteristics of 9Cr–1Mo–0.1C (mass%) Steel
    B. Jeyaganesh
    S. Raju
    S. Murugesan
    E. Mohandas
    M. Vijayalakshmi
    International Journal of Thermophysics, 2009, 30 : 619 - 634
  • [44] Corrosion Behaviour of Uncoated and Ceramic Coated 9Cr–1Mo Steel in Molten LiCl–KCl–UCl3 Salt
    Ch. Jagadeeswara Rao
    T. P. Ismail
    A. Ravi Shankar
    Atul Ramesh Ballal
    C. Mallika
    U. Kamachi Mudali
    Transactions of the Indian Institute of Metals, 2017, 70 : 1359 - 1367
  • [45] Serrated yielding in 9Cr-1Mo ferritic steel
    Choudhary, BK
    Rao, KBS
    Mannan, SL
    Kashyap, BP
    MATERIALS SCIENCE AND TECHNOLOGY, 1999, 15 (07) : 791 - 797
  • [46] Influence of boron and nitrogen on microstructure and hardness of heat-affected zone of modified 9Cr–1Mo steel—Gleeble simulation study
    C. R. Das
    A. K. Bhaduri
    S. Lakshmi
    S. Chakravarty
    S. K. Kar
    S. K. Albert
    Welding in the World, 2015, 59 : 513 - 519
  • [47] Development of a Sulfamic Acid-Based Chemical Formulation for Effective Cleaning of Modified 9Cr–1Mo Steel Steam Generator Tubes
    Namrata Upadhyay
    M. G. Pujar
    R. P. George
    John Philip
    Transactions of the Indian Institute of Metals, 2020, 73 : 343 - 352
  • [48] Experimental investigation of creep crack growth behavior in the heat affected zone of boron added modified 9Cr?1Mo steel weld
    Kumar, Yatindra
    Dash, Manmath Kumar
    Moitra, A.
    Sasikala, G.
    Albert, Shaju K.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2021, 814
  • [49] Effect of Thermomechanical Treatment on the Grain Boundary Character Distribution in a 9Cr-1Mo Ferritic Steel
    Karthikeyan, T.
    Paul, V. Thomas
    Mishra, S. K.
    Saroja, S.
    Vijayalakshmi, M.
    Samajdar, I.
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2009, 40A (09): : 2030 - 2032
  • [50] Effect of Thermomechanical Treatment on the Grain Boundary Character Distribution in a 9Cr-1Mo Ferritic Steel
    T. Karthikeyan
    V. Thomas Paul
    S. K. Mishra
    S. Saroja
    M. Vijayalakshmi
    I. Samajdar
    Metallurgical and Materials Transactions A, 2009, 40 : 2030 - 2032
12345