Recrystalised grain morphology in 9Cr 1Mo ferritic steel

被引：14

作者：

Mungole, M. N. ^{[1
]}

Sahoo, Gadadhar ^{[2
]}

Bhargava, S. ^{[3
]}

Balasubramaniam, R. ^{[1
]}

机构：

[1] Indian Inst Technol, Dept Mat & Met Engn, Kanpur 208016, Uttar Pradesh, India

[2] Steel Author India Ltd, R&D Ctr Iron & Steel, Ranchi 834002, Bihar, India

[3] PDPM Indian Inst Informat Technol, Jabalpur 482011, India

来源：

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2008年 / 476卷 / 1-2期

关键词：

ferritic steel; cold rolling; recrystallization-annealing; micro-hardness; tensile strength; ductility;

D O I：

10.1016/j.msea.2007.04.105

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Grain morphology in cold rolled, recrystallize-annealed 9Cr 1Mo commercial grade ferritic steel has been investigated. The recrytallization-annealing up to 100 h at 1100 K exhibited carbide particles embedded in alpha-ferrite grain matrix. The resulted grain sizes were much smaller than those of virgin sample. The heat treatment more than 100 h resulted in dual phase ferrite-martensite morphology. The recrystallization-annealing at 1300 and 1350 K changed the morphology in complete tempered martensite microstructure significantly. The hardness of martensite structure was more than that of the ferrite. The 80% cold rolled samples resulted in increase in tensile strength with significant loss in ductility after recrystallization-annealing and air cooling. (C) 2007 Elsevier B.V. All rights reserved.

引用

页码：140 / 145

页数：6

共 50 条

[31] Microstructural characteristics and mechanical properties of friction-stir-welded modified 9Cr–1Mo steel
Shengli Li
Xinqi Yang
Feixiang Wang
Wenshen Tang
Huijun Li
Journal of Materials Science, 2019, 54 : 6632 - 6650
[32] Tensile Properties of Modified 9Cr–1Mo Steel Clad Tube to End Plug Weld Joint
M. Bala Parandhma Raju
K. Sankaranarayanasamy
S. Latha
T. V. Prabhu
G. V. Prasad Reddy
Journal of Materials Engineering and Performance, 2021, 30 : 3718 - 3725
[33] An experimental study on impingement wastage of Mod 9Cr 1Mo steel due to sodium water reaction
Kishore, S.
Kumar, A. Ashok
Chandramouli, S.
Nashine, B. K.
Rajan, K. K.
Kalyanasundaram, P.
Chetal, S. C.
NUCLEAR ENGINEERING AND DESIGN, 2012, 243 : 49 - 55
[34] Study of Dissimilar Header Welding Between 2.25Cr–1Mo Steel and 9Cr–1Mo Steel with 9018 B9 Electrode Under Various Conditions of Post Weld Heat Treatment
Abdur Rahman Sultan
R. Ravibharath
R. Narayanasamy
Transactions of the Indian Institute of Metals, 2017, 70 : 2079 - 2092
[35] Comparison of Mechanical and Metallurgical Properties of Modified 9Cr–1Mo Steel for Conventional TIG and A-TIG Welds
Kamal H. Dhandha
Vishvesh J. Badheka
Transactions of the Indian Institute of Metals, 2019, 72 : 1809 - 1821
[36] Proton Irradiation Induced Hardening and Its Recovery During Healing Treatment of Modified 9Cr–1Mo Steel
V. Thomas Paul
B. Sundaravel
S. Murugesan
P. Parameswaran
Transactions of the Indian Institute of Metals, 2018, 71 : 2293 - 2301
[37] Investigations into Effect of Specimen Diameter and Die Curvature on Small Punch Testing of Mod 9Cr–1Mo Steel
Abdul Rahman Shaik
Ashish Kolhatkar
Vinayak Sharma
Ran Vijay Kumar
V. Karthik
R. Divakar
Transactions of the Indian Institute of Metals, 2019, 72 : 1493 - 1496
[38] 改进型9Cr—1Mo钢的蠕变性能
马耀根
锅炉技术, 1992, (07) : 10 - 21
[39] Pitting Corrosion Behaviour of Boron Added Modified 9Cr–1Mo Steel: Combined Effects of Alkali and Chloride Ions
Namrata Upadhyay
M. G. Pujar
C. R. Das
Nanda Gopal Krishna
C. Mallika
U. Kamachi Mudali
Transactions of the Indian Institute of Metals, 2015, 68 : 129 - 141
[40] Corrosion of Modified 9Cr–1Mo Steel and Indian RAFMS in Static Pb–17Li at 773 K
Poulami Chakraborty
Vivekanand Kain
Pankaj Kumar Pradhan
Ram Kishen Fotedar
Nagaiyar Krishnamurthy
Journal of Fusion Energy, 2015, 34 : 293 - 297

← 1 2 3 4 5 →