Modelling and simulation of die casting process for A356 semi-solid alloy

被引：9

作者：

Fu, Jinlong ^{[1
]}

Wang, Kaikun ^{[1
]}

机构：

[1] Univ Sci & Technol Beijing, Sch Mat Sci & Engn, Beijing 100083, Peoples R China

来源：

11TH INTERNATIONAL CONFERENCE ON TECHNOLOGY OF PLASTICITY, ICTP 2014 | 2014年 / 81卷

关键词：

One-phase model; Constitutive equation; Isothermal experiment; Die filling simulation; METAL-ALLOYS; BEHAVIOR; STATE;

D O I：

10.1016/j.proeng.2014.10.191

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

To describe the flow behaviors of semi-solid state alloy A356, two non-Newtonian constitutive equations are modeled in this paper. All the parameters in the above equations are obtained by an isothermal shear experiment. The CFD software PROCAST is used to simulate the process of die filling. The filling temperature is 585 degrees C (solid fraction is 0.4). A Newtonian type fluid which stands for the traditional casting is also performed. Based on the results of the simulation, it is found that the material in semi-solid state exhibits an apparently higher viscosity and thus, flows much more smoothly than the Newtonian fluid. In addition, the semi-solid metal alloy has a special die filling behavior compared with liquid filling which is of great importance in improving the quality of the final components. (C) 2014 Published by Elsevier Ltd.

引用

页码：1565 / 1570

页数：6

共 50 条

[31] The rheological behavior for thixocasting of semi-solid aluminum alloy (A356)
Yang, XJ
Jing, YH
Liu, J
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2002, 130 : 569 - 573
[32] Effect of yttrium on the microstructure of a semi-solid A356 Al alloy
LIU Zheng and HU Yongmei Faculty of Material and Chemical Engineering
Rare Metals, 2008, (05) : 536 - 540
[33] Study on Thixotropic Property of A356 Alloy in Semi-Solid State
Simlandi, Sudip
Barman, Nilkanta
Chattopadhyay, Himadri
SEMI-SOLID PROCESSING OF ALLOYS AND COMPOSITES XII, 2013, 192-193 : 335 - 340
[34] Limiting length of semi-solid A356 alloy rheological filling
School of Mechanical and Electronic Control Engineering, Beijing Jiaotong University, Beijing 100044, China
不详
Zhongguo Youse Jinshu Xuebao, 2006, 6 (970-975):
[35] Microstructural evolution of semi-solid A356 alloy during reheating
Hu, Yong
Zhao, Longzhi
Liu, Dejia
Tang, Yanchuan
Jiang, Hui
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2018, 109 (10) : 951 - 956
[36] Optimization of semi-solid metal processing of A356 aluminum alloy
Nourouzi, S.
Baseri, H.
Kolandooz, A.
Ghavamodini, S. M.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2013, 27 (12) : 3869 - 3874
[37] Research on Effect of La on Microstructure in Semi-solid A356 Alloy
Liu, Xiao Mei
Liu, Zheng
Hu, Yong Mei
MANUFACTURING ENGINEERING AND AUTOMATION I, PTS 1-3, 2011, 139-141 : 693 - +
[38] Influence of Ultrasonic Vibration on Preparation for Semi-Solid A356 Alloy
Wang Jia-xuan
Li Chun
Jiang Li-hong
Fang Min
MANUFACTURING SCIENCE AND TECHNOLOGY, PTS 1-3, 2011, 295-297 : 1465 - 1469
[39] Defects distribution and control of semi-solid aluminum alloy (A356) parts in thixoforming process
School of Materials Science and Engineering, Shanghai University, Shanghai 200072, China
Tezhong Zhuzao Ji Youse Hejin, 2007, 7 (522-524):
[40] Preparation of semi-solid A356 Al-alloy slurry by introducing grain process
Chen Zheng-zhou
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2012, 22 (06) : 1307 - 1312

← 1 2 3 4 5 →