Three dimensional optimization of small-scale axial turbine for low temperature heat source driven organic Rankine cycle

被引:37
|
作者
Al Jubori, Ayad [1 ,2 ]
Al-Dadah, Raya K. [1 ]
Mahmoud, Saad [1 ]
Ennil, A. S. Bahr [1 ]
Rahbar, Kiyarash [1 ]
机构
[1] Univ Birmingham, Sch Engn, Dept Mech Engn, Birmingham B15 2TT, W Midlands, England
[2] Univ Technol Baghdad, Baghdad, Iraq
关键词
Small-scale axial turbine; ORC; Mean-line design; CFD; 3D optimization; Multi-objective genetic algorithm; MULTIOBJECTIVE OPTIMIZATION; WORKING FLUIDS; OPTIMUM DESIGN; ORC; EXPANDERS; MIXTURES;
D O I
10.1016/j.enconman.2016.10.060
中图分类号
O414.1 [热力学];
学科分类号
摘要
Advances in optimization techniques can be used to enhance the performance of turbines in various applications. However, limited work has been reported on using such optimization techniques to develop small-scale turbines for organic Rankine cycles. This paper investigates the use of multi-objective genetic algorithm to optimize the stage geometry of a small-axial subsonic turbine. This optimization is integrated with organic Rankine cycle analysis using wide range of high density organic working fluids like R123, R134a, R141b, R152a, R245fa and isobutane suitable for low temperature heat sources <100 degrees C such as solar energy to achieve the best turbine design and highest organic Rankine cycle efficiency. The isentropic efficiency of the turbine in most of the reported organic Rankine cycle studies was assumed constant, while the current work allows the turbine isentropic efficiency to change (dynamic value) with both operating conditions and working fluids. Three-dimensional computational fluid dynamics analysis and multi-objective genetic algorithm optimization were performed using three-dimensional Reynolds-averaged Navier-Stokes equations with k-omega shear stress transport turbulence model in ANSYS(R17)-CFX and design exploration for various working fluids. The optimization was carried out using eight design paraMeters for the turbine stage geometry optimization including stator and rotor number of blades, rotor leading edge beta angle, trailing edge beta angle, stagger angle, throat width, trailing half wedge angle and shroud tip clearance. Results showed that using working fluid R123 for a turbine with mean diameter of 70 mm, the maximum isentropic efficiency was about 88% and power output of 6.3 kW leading to cycle thermal efficiency of 10.5% showing an enhancement of 14.08% compared to the baseline design. Such results highlight the potential of the 3D optimization technique to improve the organic Rankine cycle performance. (C) 2016 Elsevier Ltd. All rights reserved.
引用
收藏
页码:411 / 426
页数:16
相关论文
共 50 条
  • [11] Three-dimensional performance analysis of a radial-inflow turbine for an organic Rankine cycle driven by low grade heat source
    Xia, Jiaxi
    Wang, Jiangfeng
    Wang, Hongyang
    Dai, Yiping
    ENERGY CONVERSION AND MANAGEMENT, 2018, 169 : 22 - 33
  • [12] Design and structure optimization of small-scale radial inflow turbine for organic Rankine cycle system
    Wu, Tan
    Shao, Long
    Wei, Xinli
    Ma, Xinling
    Zhang, Guojie
    ENERGY CONVERSION AND MANAGEMENT, 2019, 199
  • [13] Experimental characterization and comparison of an axial and a cantilever micro-turbine for small-scale Organic Rankine Cycle
    Weiss, Andreas P.
    Popp, Tobias
    Mueller, Jonas
    Hauer, Josef
    Brueggemann, Dieter
    Preissinger, Markus
    APPLIED THERMAL ENGINEERING, 2018, 140 : 235 - 244
  • [14] DESIGN AND OPTIMIZATION OF A LOW TEMPERATURE ORGANIC RANKINE CYCLE AND TURBINE
    Erbas, Murat
    Sofuoglu, Mehmet Alper
    Biyikoglu, Atilla
    Uslan, Ibrahim
    PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2013, VOL 6A, 2014,
  • [15] Performance analysis of low speed axial impulse turbine using two type nozzles for small-scale organic Rankine cycle
    Sun, Hongchuang
    Qin, Jiang
    Hung, Tzu-Chen
    Huang, Hongyan
    Yan, Peigang
    ENERGY, 2019, 169 : 1139 - 1152
  • [16] Experimental investigation on a small pumpless ORC (organic rankine cycle) system driven by the low temperature heat source
    Gao, P.
    Wang, L. W.
    Wang, R. Z.
    Jiang, L.
    Zhou, Z. S.
    ENERGY, 2015, 91 : 324 - 333
  • [17] Evaluation of a small-scale waste heat recovery organic Rankine cycle
    Uusitalo, Antti
    Honkatukia, Juha
    Turunen-Saaresti, Teemu
    APPLIED ENERGY, 2017, 192 : 146 - 158
  • [18] Design of Small-scale Radial Inflow Turbine Integrated into Organic Rankine Cycle
    Wang, Hui
    Ma, Xinling
    Wei, Xinli
    NATURAL RESOURCES AND SUSTAINABLE DEVELOPMENT II, PTS 1-4, 2012, 524-527 : 3907 - 3913
  • [19] Experimental analysis of a small-scale scroll expander for low-temperature waste heat recovery in Organic Rankine Cycle
    Campana, Claudio
    Cioccolanti, Luca
    Renzi, Massimiliano
    Caresana, Flavio
    ENERGY, 2019, 187
  • [20] Thermodynamic and economic optimization of a double-pressure organic Rankine cycle driven by low-temperature heat source
    Sun, Qingxuan
    Wang, Yaxiong
    Cheng, Ziyang
    Wang, Jiangfeng
    Zhao, Pan
    Dai, Yiping
    RENEWABLE ENERGY, 2020, 147 : 2822 - 2832