Technological advancements in evaluating the performance of the pulverized coal injection through tuyeres in blast furnace

被引：8

作者：

Agrawal, Ashish ^{[1
]}

Tiwari, Rohit Kumar ^{[2
]}

Kumar, Sanjiv ^{[1
]}

Chatterjee, Rajeswar ^{[1
]}

Singh, Basant Kumar ^{[1
]}

Singh, Rama Shankar ^{[1
]}

Tripathi, Vineet Ranjan ^{[1
]}

Kundu, Subhashis ^{[1
]}

Padmapal ^{[1
]}

Ramna, R. V. ^{[1
]}

Singh, Manish Kumar ^{[1
]}

机构：

[1] Tata Steel Ltd, Jamshedpur, Bihar, India

[2] Tata Steel Ltd, Kalinganagar, India

来源：

METALLURGICAL RESEARCH & TECHNOLOGY | 2020年 / 117卷 / 06期

关键词：

Pulverized coal injection; blockage; raceway; tuyere camera; coal combustion; LIQUID FLOW DISTRIBUTIONS; NATURAL-GAS INJECTION; COMBUSTION BEHAVIOR; NUMERICAL-SIMULATION; TEMPERATURE-FIELD; COAL/COKE COMBUSTION; COMPUTER-SIMULATION; FLAME TEMPERATURE; RACEWAY SIZE; IRONMAKING;

D O I：

10.1051/metal/2020068

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

The pulverized coal injection (PCI) is pursued to reduce the hot metal production cost by replacing the expensive metallurgical coke with the non-coking coal. Increasing the PCI rate causes various difficulties in the blast furnace (BF) operation. In the present work, an attempt is made to review the various aspects of PC injection in BF such as the challenges with increasing the PCI rate and modifications in the injection system to circumvent the concerns related to higher PCI rate. Various methods for detecting the tuyere blockage and failure caused due to the high PCI rate are elaborated. The factors influencing the combustion of coal in front of tuyeres have been discussed and their impact in the replacement ratio has been discussed. Further, recommendations are made to improve the coal combustibility in front of tuyeres.

引用

页数：22

共 50 条

[41] Development of the injection lance for high pulverized coal injection operation in a blast furnace
Murai, R
Sato, M
Ariyama, T
Sakai, A
Kishimoto, S
HOWARD WORNER INTERNATIONAL SYMPOSIUM ON INJECTION IN PYROMETALLURGY, 1996, : 313 - 323
[42] PULVERIZED COAL INJECTION IN THE BLAST-FURNACE - INCREASE OF THE INJECTION RATE BY USE OF COAL MIXTURES
GUDENAU, HW
KORTHAS, B
KIESLER, R
BIRKHAUSER, L
STAHL UND EISEN, 1990, 110 (11): : 35 - 40
[43] Comparison of isothermal and nonisothermal combustion methods when evaluating semicoke for pulverized coal injection of blast furnace
He, Jiangyong
Zou, Chong
Zhao, Junxue
Yu, Nan
Wang, Yi
Shi, Ruimeng
ASIA-PACIFIC JOURNAL OF CHEMICAL ENGINEERING, 2023, 18 (01)
[44] A predictor model for evaluating pulverized coal injection in blast furnaces
Wang, GX
Litster, JD
58TH IRONMAKING CONFERENCE PROCEEDINGS, 1999, 58 : 455 - 465
[45] Tuyere level coke characteristics in blast furnace with pulverized coal injection
Chung, JK
Hur, NS
ISIJ INTERNATIONAL, 1997, 37 (02) : 119 - 125
[46] RESEARCH ON SIMULTANEOUS INJECTION OF WASTE TIRES WITH PULVERIZED COAL FOR BLAST FURNACE
Yan, Bingji
Zhang, Jianliang
Guo, Hongwei
Liu, Feng
ADVANCES IN MATERIALS SCIENCE FOR ENVIRONMENTAL AND ENERGY TECHNOLOGIES IV, 2015, 253 : 135 - 144
[47] Blast furnace high pulverized coal rate injection at Kobe Steel
Ito, Ryoji
Yoshida, Yasuo
Hoshino, Koichi
Noma, Fumio
Suzuki, Tomio
R and D: Research and Development Kobe Steel Engineering Reports, 2000, 50 (03): : 6 - 11
[48] PULVERIZED COAL AND IRON-ORE INJECTION IN THE BLAST-FURNACE
GUDENAU, HW
KIESLER, R
RUDACK, M
SHIBATA, K
STAHL UND EISEN, 1993, 113 (07): : 95 - 100
[49] The ten year practice of blast furnace operation with pulverized coal injection
Tereshchenko, V.P.
Nozdrachev, V.A.
Yaroshevskij, S.L.
Braga, V.V.
Shtukarin, I.V.
Didevich, A.V.
Stal', 1992, (01): : 6 - 10
[50] Determining the gas trajectory in blast-furnace injection of pulverized coal
Lyalyuk V.P.
Tarakanov A.K.
Kassim D.A.
Otorvin P.I.
Pinchuk D.V.
Steel in Translation, 2017, 47 (4) : 257 - 262

← 1 2 3 4 5 →