Technological advancements in evaluating the performance of the pulverized coal injection through tuyeres in blast furnace

被引:8
|
作者
Agrawal, Ashish [1 ]
Tiwari, Rohit Kumar [2 ]
Kumar, Sanjiv [1 ]
Chatterjee, Rajeswar [1 ]
Singh, Basant Kumar [1 ]
Singh, Rama Shankar [1 ]
Tripathi, Vineet Ranjan [1 ]
Kundu, Subhashis [1 ]
Padmapal [1 ]
Ramna, R. V. [1 ]
Singh, Manish Kumar [1 ]
机构
[1] Tata Steel Ltd, Jamshedpur, Bihar, India
[2] Tata Steel Ltd, Kalinganagar, India
关键词
Pulverized coal injection; blockage; raceway; tuyere camera; coal combustion; LIQUID FLOW DISTRIBUTIONS; NATURAL-GAS INJECTION; COMBUSTION BEHAVIOR; NUMERICAL-SIMULATION; TEMPERATURE-FIELD; COAL/COKE COMBUSTION; COMPUTER-SIMULATION; FLAME TEMPERATURE; RACEWAY SIZE; IRONMAKING;
D O I
10.1051/metal/2020068
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
The pulverized coal injection (PCI) is pursued to reduce the hot metal production cost by replacing the expensive metallurgical coke with the non-coking coal. Increasing the PCI rate causes various difficulties in the blast furnace (BF) operation. In the present work, an attempt is made to review the various aspects of PC injection in BF such as the challenges with increasing the PCI rate and modifications in the injection system to circumvent the concerns related to higher PCI rate. Various methods for detecting the tuyere blockage and failure caused due to the high PCI rate are elaborated. The factors influencing the combustion of coal in front of tuyeres have been discussed and their impact in the replacement ratio has been discussed. Further, recommendations are made to improve the coal combustibility in front of tuyeres.
引用
收藏
页数:22
相关论文
共 50 条
  • [31] Properties and Structural Optimization of Pulverized Coal for Blast Furnace Injection
    Jiang Hai-bing
    Zhang Jian-liang
    Fu Jian-xun
    Chang Jian
    Li Jing
    JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2011, 18 (03) : 6 - 12
  • [32] Evaluation of Four Coals for Blast Furnace Pulverized Coal Injection
    Raygan, Sh
    Abdizadeh, H.
    Rizi, A. Eskandari
    JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2010, 17 (03) : 8 - +
  • [33] PULVERIZED COAL INJECTION SYSTEM AND FACILITIES FOR BLAST FURNACE.
    Motonaga, Kenjiro
    Mizokawa, Takumi
    Sugahara, Takayuki
    R and D: Research and Development Kobe Steel Engineering Reports, 1986, 36 (02): : 54 - 56
  • [34] Evaluation of Four Coals for Blast Furnace Pulverized Coal Injection
    Sh Raygan
    H Abdizadeh
    A Eskandari Rizi
    Journal of Iron and Steel Research(International), 2010, 17 (03) : 8 - 12
  • [36] Properties and Structural Optimization of Pulverized Coal for Blast Furnace Injection
    Hai-bing Jiang
    Jian-liang Zhang
    Jian-xun Fu
    Jian Chang
    Jing Li
    Journal of Iron and Steel Research International, 2011, 18 : 6 - 12
  • [37] Diameter Selection of Blast Furnace Tuyeres Based on the Rate and Energy of the Fuel-Enriched Blast and Tuyere Gas Flows with the Injection of the Pulverized Coal
    Lyalyuk V.P.
    Steel in Translation, 2021, 51 (09) : 627 - 639
  • [38] Performance evaluation of pulverized coal injection of blast furnace based on principle component analysis
    Su, Bu-Xin
    Zhang, Jian-Liang
    Che, Xiao-Mei
    Guo, Jian
    Zheng, Chang-Le
    Ren, Shan
    Meitan Xuebao/Journal of the China Coal Society, 2013, 38 (12): : 2234 - 2240
  • [39] SLAG CONTROL BY LIME INJECTION THROUGH BLAST-FURNACE TUYERES
    KHRIA, DP
    CHATTERJEE, LM
    CHATTERJEE, A
    SINGH, BN
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 1983, 36 (03): : 237 - 242
  • [40] Application and Research on Coal Blending Model for Pulverized Coal Injection of Blast Furnace
    Ma Ze-jun
    Zhu Wei-chun
    Ma Li
    Pan Wen
    Wang Dong-qing
    JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2009, 16 : 821 - 824