Optimized RF/Microwave Antennas and Circuits on Low-Cost Fibrous Substrates Using Inkjet-Printing Technology

被引：0

作者：

Saghlatoon, Hossein ^{[1
]}

Sydanheimo, Lauri ^{[1
]}

Ukkonen, Leena ^{[1
]}

Tentzeris, Manos M. ^{[2
]}

机构：

[1] Tampere Univ Technol, Dept Elect & Commun Engn, FIN-33101 Tampere, Finland

[2] Georgia Inst Technol, Sch Elect & Comp Engn, Atlanta, GA 30332 USA

来源：

2014 IEEE ANTENNAS AND PROPAGATION SOCIETY INTERNATIONAL SYMPOSIUM (APSURSI) | 2014年

关键词：

D O I：

暂无

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

In this article, a procedure for printing and optimizing microwave antennas and passive circuits on low-cost fibrous paper substrates for green sensing and communication application is investigated. Inkjet-printing method is used to deposit a silver-nanoparticle-based conductive ink on a cardboard substrate. A surface treatment through the printing of a dielectric ink before the conductive deposition is required to improve the surface roughness and minimize the conductive ink substrate absorption. The practical inaccuracies are taken into account and included in the simulation model. The validity of the simulation model is verified through the simulation of practical topologies of a bandstop filter and of a patch antenna.

引用

页码：322 / 323

页数：2

共 50 条

[41] Low-Cost Inkjet-Printed Fully Passive RFID Tags Using Metamaterial-inspired Antennas for Capacitive Sensing Applications
Kim, Sangkil
Kawahara, Yoshihiro
Georgiadis, Apostolos
Collado, Ana
Tentzeris, Manos M.
2013 IEEE MTT-S INTERNATIONAL MICROWAVE SYMPOSIUM DIGEST (IMS), 2013,
[42] Characterization of Additively Produced RF-Structures on Low-Cost PCB Materials Based on Inkjet Technology for Industrial Applications up to 80 GHz
Sepaintner, Felix
Schmalzbauer, Michael
Loebbicke, Kai
Jakob, Johannes
Scharl, Andreas
Roehrl, Franz
Sammer, Roman
Bogner, Werner
Zorn, Stefan
IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY, 2021, 11 (12): : 2077 - 2088
[43] Inkjet-printing deposition of silver electro-conductive layers on textile substrates at low sintering temperature by using an aqueous silver ions-containing ink for textronic applications
Stempien, Z.
Rybicki, E.
Rybicki, T.
Lesnikowski, J.
SENSORS AND ACTUATORS B-CHEMICAL, 2016, 224 : 714 - 725
[44] Developing an optimized low-cost transtibial energy storage and release prosthetic foot using three-dimensional printing
Kamel, Hisham
Harraz, Omar
Azab, Khaled
Attia, Tamer
Journal of Engineering and Science in Medical Diagnostics and Therapy, 2020, 3 (02):
[45] The hybrid integrated planar/NRD-guide technology: A new concept for low-cost application of microwave and millimeter-wave circuits
Wu, K
Han, L
1996 IEEE MTT-S INTERNATIONAL MICROWAVE SYMPOSIUM DIGEST, VOLS 1-3, 1996, : 91 - 94
[46] Low-Cost mm-Wave Coplanar Waveguide Bandpass Filter using Inkjet Printing of Silver Nano-Particles on Flexible Plastic Substrate
Hettak, K.
Ross, T.
James, R.
Momciu, A.
2015 IEEE MTT-S INTERNATIONAL MICROWAVE SYMPOSIUM (IMS), 2015,
[47] High-performance low-cost embedded inductors using thin array plastic packaging (TAPP) for RF/microwave applications
Wong, M
Fok, N
Kwan, K
Fan, N
Chen, KJ
34TH EUROPEAN MICROWAVE CONFERENCE, VOLS 1-3, CONFERENCE PROCEEDINGS, 2004, : 519 - 522
[48] Illuminating nature’s beauty: modular, scalable and low-cost LED dome illumination system using 3D-printing technology
Fabian Bäumler
Alexander Koehnsen
Halvor T. Tramsen
Stanislav N. Gorb
Sebastian Büsse
Scientific Reports, 10
[49] Illuminating nature's beauty: modular, scalable and low-cost LED dome illumination system using 3D-printing technology
Baeumler, Fabian
Koehnsen, Alexander
Tramsen, Halvor T.
Gorb, Stanislav N.
Buesse, Sebastian
SCIENTIFIC REPORTS, 2020, 10 (01)
[50] How to produce pre-shaped rigid arch bars using low-cost 3D printing technology - A technical note
Druelle, C.
Touzet-Roumazeille, S.
Raoul, G.
Ferri, J.
Nicot, R.
JOURNAL OF STOMATOLOGY ORAL AND MAXILLOFACIAL SURGERY, 2017, 118 (04): : 213 - 216

← 1 2 3 4 5 →