Optimized RF/Microwave Antennas and Circuits on Low-Cost Fibrous Substrates Using Inkjet-Printing Technology

被引：0
|
作者：
Saghlatoon, Hossein [1 ]
Sydanheimo, Lauri [1 ]
Ukkonen, Leena [1 ]
Tentzeris, Manos M. [2 ]
机构：
[1] Tampere Univ Technol, Dept Elect & Commun Engn, FIN-33101 Tampere, Finland
[2] Georgia Inst Technol, Sch Elect & Comp Engn, Atlanta, GA 30332 USA
来源：
2014 IEEE ANTENNAS AND PROPAGATION SOCIETY INTERNATIONAL SYMPOSIUM (APSURSI) | 2014年
关键词：
D O I：
暂无
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
In this article, a procedure for printing and optimizing microwave antennas and passive circuits on low-cost fibrous paper substrates for green sensing and communication application is investigated. Inkjet-printing method is used to deposit a silver-nanoparticle-based conductive ink on a cardboard substrate. A surface treatment through the printing of a dielectric ink before the conductive deposition is required to improve the surface roughness and minimize the conductive ink substrate absorption. The practical inaccuracies are taken into account and included in the simulation model. The validity of the simulation model is verified through the simulation of practical topologies of a bandstop filter and of a patch antenna.
引用
收藏
页码：322 / 323
页数：2
相关论文
共 50 条
  • [31] Comparison of an Inkjet Fabrication Method on Low-Cost PCB Substrates With Semi Additive And Subtractive Technologies Regarding RF-Performance
    Sepaintner, Felix
    Schmalzbauer, Michael
    Jakob, Johannes
    Scharl, Andreas
    Weber, Georg
    Roehrl, Franz Xaver
    Bogner, Werner
    Zorn, Stefan
    2021 IEEE MTT-S INTERNATIONAL MICROWAVE WORKSHOP SERIES ON ADVANCED MATERIALS AND PROCESSES FOR RF AND THZ APPLICATIONS (IMWS-AMP), 2021, : 266 - 268
  • [32] Inkjet-Printed Cylindrical EBG for Low-Cost, Omnidirectional Antennas using Split-Ring Resonators
    Lee, Hoseon
    Bush, Farris
    Tentzeris, Manos
    Shaker, George
    2012 IEEE ANTENNAS AND PROPAGATION SOCIETY INTERNATIONAL SYMPOSIUM (APSURSI), 2012,
  • [33] A low-cost direct microwave QAM modulator using silicon MMIC technology
    Mohammadi, A
    Kumar, S
    1999 IEEE MTT-S SYMPOSIUM ON TECHNOLOGIES FOR WIRELESS APPLICATIONS DIGEST, 1999, : 135 - 140
  • [34] Reliable filling of through vias with silver based conductive adhesives in flexible PEN substrates using low-cost optimized stencil printing methods
    Peter, Maria
    van den Ende, Daan
    van Remoortere, Bart
    van Put, Steven
    Podprocky, Tomas
    Henckens, Anja
    van den Brand, Jeroen
    2013 EUROPEAN MICROELECTRONICS PACKAGING CONFERENCE (EMPC), 2013,
  • [35] Low-Cost Embedded System Design for Smart Home Automation Using RF Technology
    Yavuz, Erdem
    APPLIED COMPUTER SYSTEMS, 2024, 29 (02) : 1 - 13
  • [36] Fabrication of low cost microwave circuits and structures using an advanced thick film technology
    Barnwell, P
    Wood, J
    2ND 1998 IEMT/IMC SYMPOSIUM, 1998, : 327 - 332
  • [37] High-Q RF passives on organic substrates using a low-cost low-temperature laminate process
    Dalmia, S
    Lee, SH
    Bhattacharya, S
    Ayazi, F
    Swaminathan, M
    DESIGN, TEST, INTEGRATION, AND PACKAGING OF MEMS/MOEMS 2002, 2002, 4755 : 660 - 669
  • [38] Low-cost ceramic membranes manufacture using INKJET technology for active layer deposition and validation on membrane bioreactors
    Lujan-Facundo, M. J.
    Mendoza-Roca, J. A.
    Bes-Pia, A.
    Zuriaga-Agusti, E.
    Mestre, Sergio
    Palacios, Maria-Dolores
    PROCESS SAFETY AND ENVIRONMENTAL PROTECTION, 2023, 176 : 618 - 626
  • [39] A Low-Cost Test Method for Embedded RF Passive Circuits Using Two-Tone Input Signals
    Goyal, Abhilash
    Swaminathan, Madhavan
    2009 IEEE 10TH ANNUAL WIRELESS AND MICROWAVE TECHNOLOGY CONFERENCE, 2009, : 171 - 174
  • [40] A LOW-COST AND OPEN-SOURCE ROBOTIC FISH USING 3D PRINTING TECHNOLOGY
    Santos, Matheus N.
    Souza, Jonnathan V.
    Kamarry, Stephanie
    Santos, Phillipe
    Prudente, Fabio
    OCEANS 2023 - LIMERICK, 2023,
12345