INVESTIGATIONS OF THE SHRINK-FITTED JOINTS IN ASSEMBLED CRANKSHAFTS

被引：0

作者：

Siemiatkowski, Zbigniew ^{[1
]}

Rucki, Miroslaw ^{[1
]}

Lavrynenko, Sergiy ^{[2
]}

机构：

[1] Kazimierz Pulaski Univ Technol & Humanities Radom, Radom, Poland

[2] Natl Tech Univ, Kharkov Polytech Inst, Kharkov, Ukraine

来源：

PROCEEDINGS OF THE 7TH INTERNATIONAL CONFERENCE ON MECHANICS AND MATERIALS IN DESIGN (M2D2017) | 2017年

关键词：

mechanical engineering; shrink fittings; assembled crankshafts;

D O I：

暂无

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This work describes the investigations on the shrink-fitted joints. The models of the marine engine cranks and pivots were made in the scale 1: 5 considering the real manufacturing conditions of the large-sized crankshafts. The results of the ultrasonic measurements of the stresses were compared to the temperature distribution during the cooling of the assembled couplings. The conclusion was that the unsteady stress distribution might be caused by the unsteady cooling process. As a consequence, more tight joints may reveal not better ability to bear a load torque.

引用

页码：1155 / 1158

页数：4

共 50 条

[21] Gun Barrel Refurbishing Using a Shrink-fitted Autofrettaged Liner
Perry, J.
Perl, M.
PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE - 2015, VOL 5, 2015,
[22] Axisymmetric stress analysis and strength of bonded shrink-fitted joints subjected to push-off forces
Yoneno, M
Sawa, T
Shimotakahara, K
Motegi, Y
JSME INTERNATIONAL JOURNAL SERIES A-SOLID MECHANICS AND MATERIAL ENGINEERING, 1997, 40 (04) : 362 - 374
[23] A shrink-fitted peg of finite depth subjected to a tensile load
Mugadu, A
Hills, DA
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2001, 215 (06) : 699 - 711
[24] Gun Barrel Refurbishing Using a Shrink-Fitted Autofrettaged Liner
Perry, J.
Perl, M.
JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME, 2018, 140 (02):
[25] Numerical analysis of toroidal voids as stress relievers in shrink-fitted shafts
Erena, D.
Vazquez, J.
Navarro, C.
Dominguez, J.
TRIBOLOGY INTERNATIONAL, 2020, 143
[26] ANALYSIS OF A THIN CYLINDER SHRINK-FITTED WITH AN ELASTIC RING OF FINITE LENGTH
SINGH, S
PANT, GB
MECHANICAL ENGINEERING, 1983, 105 (02) : 100 - 100
[27] Numerical Simulation on Interfacial Creep Generation for Shrink-fitted Bimetallic Roll
Sakai, Hiromasa
Noda, Nao-Aki
Sano, Yoshikazu
Zhang, Guowei
Takase, Yasushi
ISIJ INTERNATIONAL, 2019, 59 (05) : 889 - 894
[28] Coupled Thermomechanical Analysis of Autofrettaged and Shrink-Fitted Compound Cylindrical Shells
Abdelsalam, Ossama R.
Sedaghati, Ramin
JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME, 2014, 136 (01):
[29] A Study on Effective Diameter of Shrink-fitted Shaft-hub Connection
Song, Wei
Liu, Zhanchi
Lu, Qi
2017 INTERNATIONAL CONFERENCE ON ADVANCED MECHATRONIC SYSTEMS (ICAMECHS), 2017, : 274 - 279
[30] ELASTOPLASTIC ANALYSIS OF ROTATING SHRINK-FITTED DISKS WITH NONLINEAR HARDENING CHARACTERISTICS
MEGAHED, MM
ABDELKADER, MS
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 1993, 30 (06) : 751 - 765

← 1 2 3 4 5 →