Effect of adhesive thickness on adhesively bonded T-joint

被引：2
|
作者：
Abdullah, A. R. [1 ]
Afendi, Mohd [2 ]
Majid, M. S. Abdul [2 ]
机构：
[1] Petronas Chem Fertiliser Kedah Sdn Bhd, Gurun 08300, Malaysia
[2] Univ Malaysia Perlis, Arau 02600, Malaysia
来源：
2ND INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING RESEARCH (ICMER 2013) | 2013年 / 50卷
关键词：
D O I：
10.1088/1757-899X/50/1/012063
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The aim of this work is to analyze the effect of adhesive thickness on tensile strength of adhesively bonded stainless steel T-joint. Specimens were made from SUS 304 Stainless Steel plate and SUS 304 Stainless Steel perforated plate. Four T-joint specimens with different adhesive thicknesses (0.5, 1.0, 1.5 and 2.0 mm) were made. Experiment result shows T-joint specimen with adhesive thickness of 1.0 mm yield highest maximum load. Identical T-joint specimen jointed by spot welding was also tested. Tensile test shows welded T-Joint had eight times higher tensile load than adhesively bonded T-joint. However, in low pressure application such as urea granulator chamber, high tensile strength is not mandatory. This work is useful for designer in fertilizer industry and others who are searching for alternative to spot welding.
引用
收藏
页数：5
相关论文
共 50 条
  • [41] STRENGTH OF CYLINDER JOINT ADHESIVELY BONDED BY COUPLING
    IKEGAMI, K
    SUGIBAYASHI, T
    MATSUO, K
    ARCHIVE OF APPLIED MECHANICS, 1994, 65 (01) : 44 - 53
  • [42] Torsional Stiffness Verification of an Adhesively Bonded Joint
    Annicchiarico, A.
    Caputo, F.
    De Angelis, G.
    Frasca, F.
    Lamanna, G.
    5TH INTERNATIONAL CONFERENCE ON TIMES OF POLYMERS TOP AND COMPOSITES, 2010, 1255 : 398 - +
  • [43] Numerical simulation of debonding of adhesively bonded joint
    Krasucki, F
    Münch, A
    Ousset, Y
    INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2002, 39 (26) : 6355 - 6383
  • [44] Predicting the fatigue life of adhesively bonded joint
    Kinloch, A.F.
    Osiyemi, S.O.
    Journal of Adhesion, 1993, 43 (1-2):
  • [45] Material and adhesive effect in adhesively-bonded composite stepped-lap joints
    Brito, R. F. N.
    Campilho, R. D. S. G.
    Moreira, R. D. F.
    Sanchez-Arce, I. J.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART G-JOURNAL OF AEROSPACE ENGINEERING, 2020, 234 (13) : 1967 - 1979
  • [46] Effect of adhesive thickness on the interface of singular stress at the adhesive dissimilar joint
    Zhang Y.
    Noda N.-A.
    Takaishi K.-T.
    Lan X.
    Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A, 2011, 77 (774): : 360 - 372
  • [47] EFFECT OF ADHESIVE THICKNESS ON RETENTION OF DIRECT BONDED ORTHODONTIC BRACKETS
    SCHECHTER, G
    CAPUTO, AA
    CHACONAS, SJ
    JOURNAL OF DENTAL RESEARCH, 1980, 59 : 285 - 285
  • [48] EFFECT OF ADHESIVE THICKNESS ON INTERFACIAL FRACTURE OF BONDED STEEL JOINTS
    Ji, Gefu
    Ouyang, Zhenyu
    Li, Guoqiang
    Pang, Su-Seng
    Ibekwe, Samuel
    PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE 2010, VOL 3, 2010, : 45 - 52
  • [49] 3D Finite Element Stress Analysis of Butt Adhesively Bonded Dissimilar Joint: Effect of Bond Thickness on Strength
    Izzawati, B.
    Afendi, M.
    Afif, M.
    Nurhashima, S.
    Daud, R.
    Amin, N. A. M.
    Majid, M. S. Abdul
    Mechanical and Materials Engineering, 2014, 554 : 355 - 359
  • [50] The effect of joint configuration on the strength and stress distributions of dissimilar adhesively bonded joints
    Kanani, Armin Yousefi
    Hou, Xiaonan
    Laidlaw, Rachael
    Ye, Jianqiao
    ENGINEERING STRUCTURES, 2021, 226
12345