Effect of adhesive thickness on adhesively bonded T-joint

被引：2
|
作者：
Abdullah, A. R. [1 ]
Afendi, Mohd [2 ]
Majid, M. S. Abdul [2 ]
机构：
[1] Petronas Chem Fertiliser Kedah Sdn Bhd, Gurun 08300, Malaysia
[2] Univ Malaysia Perlis, Arau 02600, Malaysia
来源：
2ND INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING RESEARCH (ICMER 2013) | 2013年 / 50卷
关键词：
D O I：
10.1088/1757-899X/50/1/012063
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The aim of this work is to analyze the effect of adhesive thickness on tensile strength of adhesively bonded stainless steel T-joint. Specimens were made from SUS 304 Stainless Steel plate and SUS 304 Stainless Steel perforated plate. Four T-joint specimens with different adhesive thicknesses (0.5, 1.0, 1.5 and 2.0 mm) were made. Experiment result shows T-joint specimen with adhesive thickness of 1.0 mm yield highest maximum load. Identical T-joint specimen jointed by spot welding was also tested. Tensile test shows welded T-Joint had eight times higher tensile load than adhesively bonded T-joint. However, in low pressure application such as urea granulator chamber, high tensile strength is not mandatory. This work is useful for designer in fertilizer industry and others who are searching for alternative to spot welding.
引用
收藏
页数：5
相关论文
共 50 条
  • [21] Effect of Adhesive Thickness on the Mechanical Property of Adhesively Bonded Corrugated Structure under Three-point Bending Load
    Han X.
    Sun L.
    Liu B.
    Liu Z.
    Wu C.
    Jixie Gongcheng Xuebao/Journal of Mechanical Engineering, 2023, 59 (02): : 104 - 112
  • [22] Healable and Repeatable Adhesively Bonded Joint
    Ji, Gefu
    Ouyang, Zhenyu
    Li, Guoqiang
    Ibekwe, Samuel
    Pang, Su-Seng
    PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, PVP 2011, VOL 6, A AND B, 2012, : 113 - 116
  • [23] Adhesively bonded healable composite joint
    Li, Guoqiang
    Ji, Gefu
    Ouyang, Zhenyu
    INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2012, 35 : 59 - 67
  • [24] Modelling arbitrary through-thickness crack in a tubular T-joint
    Lie, ST
    Chiew, SP
    Lee, CK
    Wong, SM
    Huang, ZW
    PROCEEDINGS OF THE 10TH (2000) INTERNATIONAL OFFSHORE AND POLAR ENGINEERING CONFERENCE, VOL IV, 2000, : 53 - 58
  • [25] Effect of Adhesive Layer's Voids on Stress Distribution of Adhesively Bonded Joints
    Zhao, Hailong
    Gao, Zongzhan
    Yue, Zhufeng
    Jiang, Zhifeng
    MANUFACTURING ENGINEERING AND AUTOMATION I, PTS 1-3, 2011, 139-141 : 986 - +
  • [26] Progressive damage analysis of an adhesively bonded composite T-joint under bending, considering micro-scale effects of fiber volume fraction of adherends
    Barzegar, Mohsen
    Moallem, Meisam Davoodi
    Mokhtari, Majid
    COMPOSITE STRUCTURES, 2021, 258
  • [27] Effects of adhesive, filler and Z-pin on strength of composite T-joint
    Sun W.
    Ma Y.
    Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica, 2018, 35 (01): : 110 - 116
  • [28] Effect of bonded metal substrate area and its thickness on the strength and durability of adhesively bonded joints
    Pfeiffer, Peter
    Abd El Salam Shakal, Mahmoud
    Journal of Adhesion Science and Technology, 1998, 12 (03): : 339 - 348
  • [29] Effect of bonded metal substrate area and its thickness on the strength and durability of adhesively bonded joints
    Pfeiffer, P
    Shakal, MAE
    JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 1998, 12 (03) : 339 - 348
  • [30] The effect of process parameters and plate thickness on in-plane inherent deformations in T-joint fillet weld
    Tian, Liang
    Luo, Yu
    ENGINEERING COMPUTATIONS, 2021, 38 (05) : 2078 - 2104
12345