Effect of adhesive thickness on adhesively bonded T-joint

被引：2
|
作者：
Abdullah, A. R. [1 ]
Afendi, Mohd [2 ]
Majid, M. S. Abdul [2 ]
机构：
[1] Petronas Chem Fertiliser Kedah Sdn Bhd, Gurun 08300, Malaysia
[2] Univ Malaysia Perlis, Arau 02600, Malaysia
来源：
2ND INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING RESEARCH (ICMER 2013) | 2013年 / 50卷
关键词：
D O I：
10.1088/1757-899X/50/1/012063
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The aim of this work is to analyze the effect of adhesive thickness on tensile strength of adhesively bonded stainless steel T-joint. Specimens were made from SUS 304 Stainless Steel plate and SUS 304 Stainless Steel perforated plate. Four T-joint specimens with different adhesive thicknesses (0.5, 1.0, 1.5 and 2.0 mm) were made. Experiment result shows T-joint specimen with adhesive thickness of 1.0 mm yield highest maximum load. Identical T-joint specimen jointed by spot welding was also tested. Tensile test shows welded T-Joint had eight times higher tensile load than adhesively bonded T-joint. However, in low pressure application such as urea granulator chamber, high tensile strength is not mandatory. This work is useful for designer in fertilizer industry and others who are searching for alternative to spot welding.
引用
收藏
页数：5
相关论文
共 50 条
  • [1] Thermal non-linear elastic stress analysis of an adhesively bonded T-joint
    Apalak, MK
    Apalak, ZG
    Gunes, R
    JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2003, 17 (07) : 995 - 1016
  • [2] On the non-linear elastic stresses in an adhesively bonded T-joint with double support
    Apalak, MK
    JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2002, 16 (04) : 459 - 491
  • [3] Thermal non-linear elastic stress analysis of an adhesively bonded T-joint
    Apalak, M.K. (apalakmk@erciyes.edu.tr), 1600, VSP BV (17):
  • [4] Numerical modeling and prediction of adhesion failure of adhesively bonded composite T-Joint structure
    Panda, Subhransu K.
    Mishra, Pradeep K.
    Panda, Subrata K.
    STRUCTURAL ENGINEERING AND MECHANICS, 2020, 74 (06) : 723 - 735
  • [5] The effect of geometry on joint strength in adhesively bonded joints with the same adhesive area
    Akpinar, Salih
    Hacisalihoglu, Ilyas
    Calik, Ahmet
    MECHANICS OF ADVANCED MATERIALS AND STRUCTURES, 2024, 31 (12) : 2635 - 2647
  • [6] Numerical investigation on novel geometrical configuration for adhesively bonded T-joint between aluminum and sandwich panel
    Omidali, Mandi
    Khedmati, Mohammad Reza
    THIN-WALLED STRUCTURES, 2018, 131 : 122 - 134
  • [7] Experimental and numerical analysis on the adhesive T-joint using high temperature adhesive
    Bahri, N. F.
    Afendi, M.
    Razlan, Z. M.
    Zunaidi, I.
    Wan, W. K.
    Shahriman, A. B.
    INTERNATIONAL CONFERENCE ON ADVANCED MANUFACTURING AND INDUSTRY APPLICATIONS, 2018, 429
  • [8] Mixed mode cohesive zone modelling and analysis of adhesively bonded composite T-joint under pull-out load
    Sane, Atul U.
    Padole, Pramod M.
    Manjunatha, C. M.
    Uddanwadiker, Rashmi V.
    Jhunjhunwala, Pooja
    JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 2018, 40 (03)
  • [9] Mixed mode cohesive zone modelling and analysis of adhesively bonded composite T-joint under pull-out load
    Atul U. Sane
    Pramod M. Padole
    C. M. Manjunatha
    Rashmi V. Uddanwadiker
    Pooja Jhunjhunwala
    Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2018, 40
  • [10] A model of an adhesively bonded joint with elastic-plastic adherends and a softening adhesive
    Edlund, U.
    Schmidt, P.
    Roguet, E.
    COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING, 2009, 198 (5-8) : 740 - 752
12345