A study of cooling for steady-state injection molding

被引：0

作者：

Xu, HY ^{[1
]}

Kazmer, D ^{[1
]}

机构：

[1] Univ Massachusetts, Amherst, MA 01003 USA

来源：

ANTEC '99: PLASTICS BRIDGING THE MILLENNIA, CONFERENCE PROCEEDINGS, VOLS I-III: VOL I: PROCESSING; VOL II: MATERIALS; VOL III: SPECIAL AREAS; | 1999年

关键词：

D O I：

暂无

中图分类号：

TQ [化学工业];

学科分类号：

0817 ;

摘要：

Since many current CAE softwares assume the initial temperature condition of the mold to be constant, this research investigates how the initial temperature distribution condition of the mold affects the accuracy of the estimation of the cooling time. Two cases, a mold with uniform temperature and a mold with steady-state temperature distribution due to continuous molding, are analyzed, and indicate a 30% error in cycle time prediction. Finally, the effects of different insert materials on cooling time and the production cycle are discussed.

引用

页码：3677 / 3681

页数：5

共 50 条

[41] Parametric Study for the Steady-State Equilibrium of a Towfish
Cammarata, Alessandro
Sinatra, Rosario
2014 IEEE/ASME 10TH INTERNATIONAL CONFERENCE ON MECHATRONIC AND EMBEDDED SYSTEMS AND APPLICATIONS (MESA 2014), 2014,
[42] Cooling simulation of plastic injection molding
Guo, Z.Y., 2001, Harbin Institute of Technology (08)
[43] Numerical study on steady-state cracking of composites
Yang, Enhua
Li, Victor C.
COMPOSITES SCIENCE AND TECHNOLOGY, 2007, 67 (02) : 151 - 156
[44] DISLOCATION-STRUCTURES AND STRUCTURAL STEADY-STATE IN STEADY-STATE CREEP
ORLOVA, A
CADEK, J
MATERIALS SCIENCE AND ENGINEERING, 1986, 81 (1-2): : 371 - 377
[45] Simulation of cooling process of injection molding
State Key Laboratory of Die/Mold Technology, Huazhong University of Science and Technology, Wuhan 430074, China
Prog Nat Sci, 2 (233-234):
[46] A SURVEY OF STEADY-STATE MICROELECTRODES AND EXPERIMENTAL APPROACHES TO A VOLTAMMETRIC STEADY-STATE
ZOSKI, CG
JOURNAL OF ELECTROANALYTICAL CHEMISTRY, 1990, 296 (02) : 317 - 333
[47] Simulation of cooling process of injection molding
卢义强
李德群
肖景容
ProgressinNaturalScience, 1996, (02) : 101 - 108
[48] Cooling channel optimization for injection molding
Pirc, N.
Bugarin, F.
Schmidt, F. M.
Mongeau, M.
NUMIFORM '07: MATERIALS PROCESSING AND DESIGN: MODELING, SIMULATION AND APPLICATIONS, PTS I AND II, 2007, 908 : 525 - +
[49] Tore Supra steady-state power and particle injection:: the 'CIMES' project
Beaumont, B
Becoulet, A
Bibet, P
Darbos, C
Garin, P
Géraud, A
Giruzzi, G
Grosman, A
Martin, G
Ottaviani, M
Peysson, Y
Saoutic, B
Stott, P
Zabiego, M
FUSION ENGINEERING AND DESIGN, 2001, 56-57 : 667 - 672
[50] Steady-state libraries
Kepert, A
NEW SCIENTIST, 1999, 161 (2177) : 63 - 63

← 1 2 3 4 5 →