Test Rig for Determination of Performance Characteristics of High Speed Linear Actuators

被引：0
|
作者：
Baginski, Karol [1 ]
Bodnicki, Maciej [1 ]
Credo, Wojciech [1 ]
Wawrzyniuk, Leszek [1 ]
机构：
[1] Warsaw Univ Technol, Fac Mechatron, 8 Sw A Boboli St, PL-02525 Warsaw, Poland
来源：
MECHATRONICS 2017: RECENT TECHNOLOGICAL AND SCIENTIFIC ADVANCES | 2018年 / 644卷
关键词：
Tip-tilt mirror; High speed linear actuator; Performance characteristics;
D O I：
10.1007/978-3-319-65960-2_39
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
Actuators used in systems for precision positioning of mirrors must meet rigorous requirements pertaining to accuracy and speed of realizing a displacement. Usability of an actuator dedicated to such application is determined, among other things, on the basis of an analysis of its performance characteristics. The paper describes a test rig for studying performance characteristics of fast linear actuators, including piezoelectric and electrodynamic actuators. Functional modules of the rig are presented, which allow static and dynamic characteristics to be determined. The presented exemplary results of measurements proved a capability of the considered test rig to determine performance characteristics of fast linear actuators. Further improvements of the system are proposed.
引用
收藏
页码：311 / 318
页数：8
相关论文
共 50 条
  • [41] DETERMINATION OF PASSENGER TIRE PERFORMANCE LEVELS - HIGH SPEED
    SPELMAN, RH
    SAE TRANSACTIONS, 1969, 78 : 134 - &
  • [42] On New High Performance Systems with Linear Actuators for Diurnal Orientation of PV Platforms
    Neagoe, Mircea
    Vatasescu, Maria M.
    Saulescu, Radu G.
    Creanga, Nora
    MECHANISMS, MECHANICAL TRANSMISSIONS AND ROBOTICS, 2012, 162 : 214 - 223
  • [43] Verification of the micromechanical characteristics of electrostatic linear actuators
    Kohl, M
    Gottert, J
    Mohr, J
    SENSORS AND ACTUATORS A-PHYSICAL, 1996, 53 (1-3) : 416 - 422
  • [44] Dynamometer Test Rig Drive Train Control with a High Dynamic Performance: Measurements and Experiences
    Neshati, Mohsen
    Wenske, Jan
    IFAC PAPERSONLINE, 2020, 53 (02): : 12663 - 12668
  • [45] Modelling, validation and characterisation of high-performance suspensions by means of a suspension test rig
    Zauner, Christoph
    Edelmann, Johannes
    Ploechl, Manfred
    INTERNATIONAL JOURNAL OF VEHICLE DESIGN, 2019, 79 (2-3) : 107 - 126
  • [46] EXPERIMENTAL AND COMPUTATIONAL ANALYSIS OF FILM COOLING HOLE PERFORMANCE ON A HIGH TEMPERATURE TEST RIG
    Ramesh, S.
    Ekkad, S. V.
    Straub, D. L.
    Lawson, S. A.
    Alvin, M. A.
    PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2014, VOL 8B, 2015,
  • [47] An Ultra-High-Speed Maglev Test Rig Designed for HTS Pinning Levitation and Electrodynamic Levitation
    Deng, Zigang
    Zhang, Weihua
    Kou, Long
    Cheng, Yanxing
    Huang, Huan
    Wang, Li
    Chen, Jinxiong
    Ke, Zhihao
    Ma, Qiwen
    IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2021, 31 (08)
  • [48] Efficiency characteristics of piezostack pump for linear actuators
    Kan J.
    Peng T.
    Tang K.
    Shao C.
    Zhu G.
    Frontiers of Mechanical Engineering in China, 2009, 4 (4): : 407 - 414
  • [49] Experimental Research on High Speed Brake Anti-Skid Based on Single Wheelset Test Rig
    Chen B.
    Chang C.
    Zhou J.
    Xu F.
    Zhongguo Tiedao Kexue/China Railway Science, 2022, 43 (01): : 118 - 125
  • [50] Design of a test rig for fundamental investigations of spark characteristics
    Tilz, Anton
    Meyer, Georg
    Kiesling, Constantin
    Pirker, Gerhard
    Salbrechter, Sebastian
    Wimmer, Andreas
    INTERNATIONAL JOURNAL OF ENGINE RESEARCH, 2020, 21 (08) : 1412 - 1425
12345