Test Rig for Determination of Performance Characteristics of High Speed Linear Actuators

被引：0
|
作者：
Baginski, Karol [1 ]
Bodnicki, Maciej [1 ]
Credo, Wojciech [1 ]
Wawrzyniuk, Leszek [1 ]
机构：
[1] Warsaw Univ Technol, Fac Mechatron, 8 Sw A Boboli St, PL-02525 Warsaw, Poland
来源：
MECHATRONICS 2017: RECENT TECHNOLOGICAL AND SCIENTIFIC ADVANCES | 2018年 / 644卷
关键词：
Tip-tilt mirror; High speed linear actuator; Performance characteristics;
D O I：
10.1007/978-3-319-65960-2_39
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
Actuators used in systems for precision positioning of mirrors must meet rigorous requirements pertaining to accuracy and speed of realizing a displacement. Usability of an actuator dedicated to such application is determined, among other things, on the basis of an analysis of its performance characteristics. The paper describes a test rig for studying performance characteristics of fast linear actuators, including piezoelectric and electrodynamic actuators. Functional modules of the rig are presented, which allow static and dynamic characteristics to be determined. The presented exemplary results of measurements proved a capability of the considered test rig to determine performance characteristics of fast linear actuators. Further improvements of the system are proposed.
引用
收藏
页码：311 / 318
页数：8
相关论文
共 50 条
  • [21] Development of a High Speed Gas Bearing Test Rig to Measure Rotordynamic Force Coefficients
    Moore, J. Jeffrey
    Lerche, Andrew
    Allison, Timothy
    Ransom, David L.
    Lubell, Daniel
    JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, 2011, 133 (10):
  • [22] DEVELOPMENT OF A HIGH SPEED GAS BEARING TEST RIG TO MEASURE ROTORDYNAMIC FORCE COEFFICIENTS
    Moore, J. Jeffrey
    Lerche, Andrew
    Allison, Timothy
    Ransom, David L.
    Lubell, Daniel
    PROCEEDINGS OF THE ASME TURBO EXPO 2010, VOL 5, 2010, : 541 - 548
  • [23] Characterization of a Rotor Test Rig with Tilting Pad Journal Bearings for High Peripherical Speed
    Giannetti, Guglielmo
    Meli, Enrico
    Rindi, Andrea
    ADVANCES IN ITALIAN MECHANISM SCIENCE, VOL 1, IFIT 2024, 2024, 163 : 82 - 91
  • [24] A NEW METHODOLOGY FOR ESTIMATING CAVITATION EROSION: APPLICATION ON A HIGH SPEED CAVITATION TEST RIG
    Koukouvinis, Phoevos K.
    Bergeles, George
    Gavaises, Manolis
    11TH WORLD CONGRESS ON COMPUTATIONAL MECHANICS; 5TH EUROPEAN CONFERENCE ON COMPUTATIONAL MECHANICS; 6TH EUROPEAN CONFERENCE ON COMPUTATIONAL FLUID DYNAMICS, VOLS V - VI, 2014, : 4712 - 4722
  • [25] Design of a Rig to Assess the Structural Performance of Rotors for High Speed Electric Machines
    Mallin, Levi
    ADVANCES IN MANUFACTURING ENGINEERING AND MATERIALS II, ICMEM 2020, 2021, : 301 - 323
  • [26] Hardware in the loop test-rig for identification and control application on high speed pantographs
    Collina, A
    Facchinetti, A
    Fossati, F
    Resta, F
    SHOCK AND VIBRATION, 2004, 11 (3-4) : 445 - 456
  • [27] Performance of linear motor type rail brake using roller rig test bench
    Sakamoto, Yasuaki
    Kashiwagi, Takayuki
    Hasegawa, Hitoshi
    Sasakawa, Takashi
    Karino, Yasushi
    Quarterly Report of RTRI (Railway Technical Research Institute) (Japan), 2012, 53 (01): : 41 - 45
  • [28] A test rig for kite performance measurement
    Alexander, K
    Stevenson, J
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2001, 215 (04) : 595 - 598
  • [29] A LOW SPEED COMPRESSOR TEST RIG FOR FLUTTER INVESTIGATIONS
    Malzacher, Leonie
    Geist, Silvio
    Peitsch, Dieter
    Hennings, Holger
    PROCEEDINGS OF THE ASME TURBO EXPO: TURBINE TECHNICAL CONFERENCE AND EXPOSITION, 2016, VOL 7B, 2016,
  • [30] Analysis of high speed characteristics for linear induction machines
    Yu, H.
    Jayabalan, R.
    Krishnamurthy, M.
    Fahimi, B.
    2006 IEEE VEHICLE POWER AND PROPULSION CONFERENCE, 2006, : 345 - 350
12345