The Effect Of Al2o3-Sic Andb4cadditions on Mechanical Properties of Cusnmatrix Composites for Cutting Tools

被引：1
|
作者：
KerimEmreOksuz [1 ]
Bagirov, Hanlar [1 ]
Yilmaz, Hasan [1 ]
Silahsor, Buket [1 ]
Yildirim, Vedat [1 ]
机构：
[1] Cumhuriyet Univ, Dept Met & Mat Engn, TR-58140 Sivas, Turkey
来源：
ADVANCED MATERIALS RESEARCH III | 2013年 / 685卷
关键词：
Boron Carbide; Silisium Carbide; Composite; Powder Metallurgy;
D O I：
10.4028/www.scientific.net/AMR.685.15
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In this study, effect of boron carbide (B4C), aluminium oxide (Al2O3) and silisium carbide (SiC) addition on microstructure and mechanical properties of diamond cutting segments was investigated. The effects of reinforcement particle additions on characteristic of CuSn matrix composites have been investigated. For this purpose, Al2O3SiC and B(4)Caddition quantity was added as 2 wt.%.Samples of segments were processed by cold pressing at 550 MPa, followed by sintering at 850 degrees C/30min. Micro-structural aspects were observed by optical microscope. Density, hardness and wear tests were also performed. Wear behaviour and hardness values of segments changed depending on aluminium oxide, silisium carbide and boron carbide addition. The alloy CuSn-2wt.%.B4C presented the best results, available for use in cutting tools.
引用
收藏
页码：15 / 18
页数：4
相关论文
共 50 条
  • [31] Deflocculation of Al2O3-SiC suspensions
    Oliveira, IR
    Sepulveda, P
    Pandolfelli, VC
    AMERICAN CERAMIC SOCIETY BULLETIN, 2001, 80 (02): : 47 - 53
  • [32] Microstructure and creep behavior of Al2O3-SiC ceramic matrix composites
    Deng, ZY
    Shi, JL
    Zhang, YF
    Guo, JK
    Kobayashi, T
    NOVEL SYNTHESIS AND PROCESSING OF CERAMICS, 1999, 159-1 : 399 - 404
  • [33] Fabrication and Properties of Al2O3-SiC/Sialon Composite Refractories
    Ye Dingyun
    Liu Yan-gai
    Huang Zhaohui
    Fang Minghao
    Liu Yangyang
    HIGH-PERFORMANCE CERAMICS VII, PTS 1 AND 2, 2012, 512-515 : 908 - 911
  • [34] SOME PROPERTIES OF Al2O3-SiC SINTERED COMPACT.
    Katsumura, Yuji
    Kobayashi, Masaki
    Kobori, Keiichi
    Suzuki, Hisashi
    Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy, 1988, 35 (03): : 137 - 141
  • [35] Rheological properties of Al2O3-SiC whisker composite suspensions
    Bergstrom, L
    JOURNAL OF MATERIALS SCIENCE, 1996, 31 (19) : 5257 - 5270
  • [36] Compositions and properties of mullite bonded Al2O3-SiC castables
    Zhang, Zhanying
    Li, Zaigeng
    Sun, Chengxu
    Naihuo Cailiao/Refractories, 2000, 34 (06): : 328 - 330
  • [37] Effect of Steel Millings on the Structure and Mechanical Properties of SiC–Al2O3 Composites
    National Aviation University, Kyiv
    03058, Ukraine
    J. Superhard Mater., 4 (293-302):
  • [38] Effect of Steel Millings on the Structure and Mechanical Properties of SiC-Al2O3 Composites
    Dovhal, A. H.
    Pryimak, L. B.
    Varijukhno, V. V.
    Biliakovych, O. M.
    JOURNAL OF SUPERHARD MATERIALS, 2024, 46 (04) : 293 - 302
  • [39] Effect of SiC Addition to Al2O3 Ceramics Used in Cutting Tools
    Gevorkyan, Edwin
    Rucki, Miroslaw
    Panchenko, Sergey
    Sofronov, Dmitry
    Chalko, Leszek
    Mazur, Tomasz
    MATERIALS, 2020, 13 (22) : 1 - 11
  • [40] Microstructural design for mechanical and electrical properties of spark plasma sintered Al2O3-SiC nanocomposites
    Borrell, A.
    Alvarez, I.
    Torrecillas, R.
    Rocha, V. G.
    Fernandez, A.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2012, 534 : 693 - 698
12345