The Effect Of Al2o3-Sic Andb4cadditions on Mechanical Properties of Cusnmatrix Composites for Cutting Tools

被引：1
|
作者：
KerimEmreOksuz [1 ]
Bagirov, Hanlar [1 ]
Yilmaz, Hasan [1 ]
Silahsor, Buket [1 ]
Yildirim, Vedat [1 ]
机构：
[1] Cumhuriyet Univ, Dept Met & Mat Engn, TR-58140 Sivas, Turkey
来源：
ADVANCED MATERIALS RESEARCH III | 2013年 / 685卷
关键词：
Boron Carbide; Silisium Carbide; Composite; Powder Metallurgy;
D O I：
10.4028/www.scientific.net/AMR.685.15
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In this study, effect of boron carbide (B4C), aluminium oxide (Al2O3) and silisium carbide (SiC) addition on microstructure and mechanical properties of diamond cutting segments was investigated. The effects of reinforcement particle additions on characteristic of CuSn matrix composites have been investigated. For this purpose, Al2O3SiC and B(4)Caddition quantity was added as 2 wt.%.Samples of segments were processed by cold pressing at 550 MPa, followed by sintering at 850 degrees C/30min. Micro-structural aspects were observed by optical microscope. Density, hardness and wear tests were also performed. Wear behaviour and hardness values of segments changed depending on aluminium oxide, silisium carbide and boron carbide addition. The alloy CuSn-2wt.%.B4C presented the best results, available for use in cutting tools.
引用
收藏
页码：15 / 18
页数：4
相关论文
共 50 条
  • [21] Preparation and properties of intragranular Al2O3-SiC nanocomposites
    Wang, HZ
    Gao, L
    Gui, LH
    Guo, JK
    NANOSTRUCTURED MATERIALS, 1998, 10 (06): : 947 - 953
  • [22] High temperature behaviour of Al2O3-SiC nano composites
    Verhelle, JP
    Poorteman, M
    Descamps, P
    Deletter, M
    Descamps, JC
    Cambier, F
    ENGINEERING CERAMICS: MULTIFUNCTIONAL PROPERTIES - NEW PERSPECTIVES, 2000, 175-1 : 301 - 310
  • [23] High temperature behaviour of Al2O3-SiC nano composites
    Verhelle, J.P.
    Poorteman, M.
    Descamps, P.
    Deletter, M.
    Descamps, J.C.
    Cambier, F.
    Key Engineering Materials, 2000, 175 : 301 - 310
  • [24] The effect of intragranular microstress in Al2O3-SiC nanocomposites
    王志远
    吴裕功
    佟帅
    吴斯骐
    Chinese Physics B, 2012, 21 (06) : 403 - 407
  • [25] MACHINABILITY STUDY ON Al7075/Al2O3-SiC HYBRID COMPOSITES
    Mukundaiah, Ravikumar
    Reddappa, H. N.
    Suresh, R.
    Rammohan, Y. S.
    Babu, E. R.
    Nagaraja, C. R.
    METALLURGICAL & MATERIALS ENGINEERING, 2022, 28 (01) : 61 - 77
  • [26] Mechanical properties and sliding wear behaviour of Al2O3-SiC nanocomposites with 3-20 vol% SiC
    Parchoviansky, M.
    Balko, J.
    Svancarek, P.
    Sedlacek, J.
    Dusza, J.
    Lofaj, F.
    Galusek, D.
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2017, 37 (14) : 4297 - 4306
  • [27] The effect of intragranular microstress in Al2O3-SiC nanocomposites
    Wang Zhi-Yuan
    Wu Yu-Gong
    Tong Shuai
    Wu Si-Qi
    CHINESE PHYSICS B, 2012, 21 (06)
  • [28] Influence of mechanical properties on the performance of Al2O3-SiC ceramics in the machining of inconel 718
    Johnson, A.D.
    Thangaraj, A.R.
    Weinmann, K.J.
    TMS Annual Meeting, 1992,
  • [29] Microstructure and creep behavior of Al2O3-SiC ceramic matrix composites
    Deng, Z.-Y.
    Shi, J.-L.
    Zhang, Y.-F.
    Guo, J.-K.
    Kobayashi, T.
    Key Engineering Materials, 159-160 : 399 - 404
  • [30] Microstructural characterization of Al2O3-SiC
    Schmid, HK
    Aslan, M
    Assmann, S
    Nass, R
    Schmidt, H
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 1998, 18 (01) : 39 - 49
12345