Hemming for joining high strength steel sheets

被引：12
|
作者：
Hamedon, Zamzuri [1 ]
Mori, Ken-ichiro [1 ]
Abe, Yohei [1 ]
机构：
[1] Toyohashi Univ Technol, Dept Mech Engn, Toyohashi, Aichi 4418580, Japan
来源：
11TH INTERNATIONAL CONFERENCE ON TECHNOLOGY OF PLASTICITY, ICTP 2014 | 2014年 / 81卷
关键词：
Hemming; High strength steel sheet; Hollow section; Fracture; Springback;
D O I：
10.1016/j.proeng.2014.10.288
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A high strength steel sheet is used to make the hollow sections for the body structure of automobiles. The hollow sections, which are typically joined by resistance spot welding have insufficient energy absorption because the joins are not continuous. Thus, to overcome this problem, the hollow section is joined using the hemming process. The hemming of the high strength steel sheet was successfully performed using punch with stopper. The high strength steel hollow sections joined by hemming and resistance spot welding were then examined by tensile and fatigue tests. The hollow section with hemmed joins showed better performance in both tests. The overlapping joins of the hemmed hollow section have greater strength as compared to the resistance of spot welding joins. (C) 2014 Published by Elsevier Ltd.
引用
收藏
页码：2074 / 2079
页数：6
相关论文
共 50 条
  • [21] Design of Helical Self-Piercing Rivet for Joining Aluminum Alloy and High-Strength Steel Sheets
    Kim, W. Y.
    Kim, D. B.
    Park, J. G.
    Kim, D. H.
    Kim, K. H.
    Lee, I. H.
    Cho, H. Y.
    TRANSACTIONS OF THE KOREAN SOCIETY OF MECHANICAL ENGINEERS A, 2014, 38 (07) : 735 - 742
  • [22] Mechanical clinching process with preforming of lower sheet for joining aluminium and ultra-high strength steel sheets
    Abe Y.
    Mori K.-I.
    Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, 2021, 38 (02): : 89S - 92S
  • [23] Toughness of Ultra High Strength Steel Sheets
    Hlebova, Stanislava
    Pesek, Ladislav
    METALLOGRAPHY XV, 2014, 782 : 57 - +
  • [24] Brazing of high-strength steel sheets
    Rosert, Reinhard
    Winkelmann, Ralf
    Welding Research Abroad, 2002, 48 (12): : 26 - 29
  • [25] Brazing of high-strength steel sheets
    Rosert, Reinhard
    Winkelmann, Ralf
    Schweissen und Schneiden/Welding and Cutting, 2002, 54 (03): : 161 - 164
  • [26] Development of high strength steel sheets for lightweight automobile
    Wang, Li
    Yang, Xiong-Fei
    Lu, Jiang-Xin
    Kang T'ieh/Iron and Steel (Peking), 2006, 41 (09): : 1 - 8
  • [27] Physical metallurgy of modern high strength steel sheets
    Senuma, T
    ISIJ INTERNATIONAL, 2001, 41 (06) : 520 - 532
  • [28] Evaluation of Hydrogen Embrittlement for High Strength Steel Sheets
    Toji, Y.
    Takagi, S.
    Yoshino, M.
    Hasegawa, K.
    Tanaka, Y.
    THERMEC 2009, PTS 1-4, 2010, 638-642 : 3537 - 3542
  • [29] APPLICATION OF HIGH-STRENGTH STEEL SHEETS TO THE AUTOBODY
    SATO, S
    YAMAZAKI, K
    UJIHARA, S
    TRANSACTIONS OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1981, 21 (11) : 772 - 777
  • [30] Processing and properties of advanced high strength steel sheets
    Senuma, T
    CANADIAN METALLURGICAL QUARTERLY, 2004, 43 (01) : 1 - 12
12345