Hemming for joining high strength steel sheets

被引：12
|
作者：
Hamedon, Zamzuri [1 ]
Mori, Ken-ichiro [1 ]
Abe, Yohei [1 ]
机构：
[1] Toyohashi Univ Technol, Dept Mech Engn, Toyohashi, Aichi 4418580, Japan
来源：
11TH INTERNATIONAL CONFERENCE ON TECHNOLOGY OF PLASTICITY, ICTP 2014 | 2014年 / 81卷
关键词：
Hemming; High strength steel sheet; Hollow section; Fracture; Springback;
D O I：
10.1016/j.proeng.2014.10.288
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A high strength steel sheet is used to make the hollow sections for the body structure of automobiles. The hollow sections, which are typically joined by resistance spot welding have insufficient energy absorption because the joins are not continuous. Thus, to overcome this problem, the hollow section is joined using the hemming process. The hemming of the high strength steel sheet was successfully performed using punch with stopper. The high strength steel hollow sections joined by hemming and resistance spot welding were then examined by tensile and fatigue tests. The hollow section with hemmed joins showed better performance in both tests. The overlapping joins of the hemmed hollow section have greater strength as compared to the resistance of spot welding joins. (C) 2014 Published by Elsevier Ltd.
引用
收藏
页码：2074 / 2079
页数：6
相关论文
共 50 条
  • [11] Joining magnesium and aluminum alloy sheets by a novel hole hemming process
    Pereira, Jose A. C.
    Kasaei, Mohammad Mehdi
    Carbas, Ricardo J. C.
    Marques, Eduardo A. S.
    Lim, Hyunkyu
    da Silva, Lucas F. M.
    THIN-WALLED STRUCTURES, 2023, 187
  • [12] Joining of Hot-Dip Coated High-Strength Steel Sheets by Mechanical Clinching
    Abe, Yohei
    Kato, Toru
    Kishimoto, Masaya
    Mori, Ken-ichiro
    STEEL RESEARCH INTERNATIONAL, 2010, 81 (09) : 1128 - 1131
  • [13] Plastic joining of ultra high strength steel and aluminium alloy sheets by self piercing rivet
    Mori, K.
    Kato, T.
    Abe, Y.
    Ravshanbek, Y.
    CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2006, 55 (01) : 283 - 286
  • [14] Development of high strength IF steel sheets
    Chen, H.C.
    Hwang, Y.S.
    Horng, W.R.
    K'uang Yeh (Mining & Metallurgy), 1995, 39 (02):
  • [15] Joining of high strength steel and aluminium alloy sheets by mechanical clinching with dies for control of metal flow
    Abe, Y.
    Mori, K.
    Kato, T.
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2012, 212 (04) : 884 - 889
  • [16] Parametric study on mechanical clinching process for joining aluminum alloy and high-strength steel sheets
    Lee, Chan-Joo
    Kim, Jae-Young
    Lee, Sang-Kon
    Ko, Dae-Cheol
    Kim, Byung-Min
    JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2010, 24 (01) : 123 - 126
  • [17] Wear Study of Mechanical Clinching Dies During Joining of Advanced High-Strength Steel Sheets
    Kascak, L.
    Mucha, J.
    Spisak, E.
    Kubik, R.
    STRENGTH OF MATERIALS, 2017, 49 (05) : 726 - 737
  • [18] Wear Study of Mechanical Clinching Dies During Joining of Advanced High-Strength Steel Sheets
    L. Kaščák
    J. Mucha
    E. Spišák
    R. Kubík
    Strength of Materials, 2017, 49 : 726 - 737
  • [19] Parametric study on mechanical clinching process for joining aluminum alloy and high-strength steel sheets
    Chan-Joo Lee
    Jae-Young Kim
    Sang-Kon Lee
    Dae-Cheol Ko
    Byung-Min Kim
    Journal of Mechanical Science and Technology, 2010, 24 : 123 - 126
  • [20] An investigation of the joining strength of laminated steel sheets connected through embossed projections
    Hirota, Kenji
    Ogawa, Go
    Mori, Yuji
    Kubo, Masayoshi
    ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES, 2022, 8 (02) : 1304 - 1311
12345