Introduction of nanoclay-modified fiber metal laminates

被引：37
|
作者：
Zakaria, Afshin Zamani [1 ]
Shelesh-nezhad, Karim [1 ]
机构：
[1] Univ Tabriz, Dept Mech Engn, Tabriz, Iran
来源：
ENGINEERING FRACTURE MECHANICS | 2017年 / 186卷
关键词：
Fiber metal laminate; Nanoclay reinforcement; Interfacial fracture toughness; Crack blunting; MECHANICAL-PROPERTIES; SURFACE TREATMENTS; BEHAVIOR; NANOCOMPOSITES; EXFOLIATION; IMPROVEMENT; PARTICLES; ADHESION;
D O I：
10.1016/j.engfracmech.2017.10.023
中图分类号：
O3 [力学];
学科分类号：
08 ; 0801 ;
摘要：
In this paper we aim to introduce benefits in modification of epoxy resin of fiber metal laminates (FMLs) with mineral nanoclay platelets. FMLs with carbon fibers and aluminum metal were attached by epoxy resin modified with various amounts of nanoclay. Elastic properties and interfacial toughness of fabricated FMLs were obtained for different percentages of nanoclay incorporation. Results reveal that the interfacial fracture toughness of the FML increases approximately double-fold by 0.5 wt% incorporation of nanoclay. This is attributed to the exfoliation of nanoclay (suggested by XRD) and toughening of the resin by crack blunting mechanism (suggested by SEM). (C) 2017 Elsevier Ltd. All rights reserved.
引用
收藏
页码：436 / 448
页数：13
相关论文
共 50 条
  • [31] Modal analysis on nanoclay epoxy-based fiber-glass laminates
    Avila, Antonio F.
    Donadon, Lazaro V.
    Duarte, Horacio V.
    COMPOSITE STRUCTURES, 2008, 83 (03) : 324 - 333
  • [32] Preparation and characterization of Kevlar/glass fiber laminates with a nanoclay enhanced epoxy matrix
    Vivekanandhan, Chinnasamy
    Sampath, Pavayee Subramani
    Sagadevan, Suresh
    MATERIALS TESTING, 2018, 60 (01) : 81 - 84
  • [33] Impact response of fiber metal laminates
    Vlot, A
    Kroon, E
    La Rocca, G
    IMPACT RESPONSE AND DYNAMIC FAILURE OF COMPOSITES AND LAMINATE MATERIALS, PTS 1 AND 2, 1998, 141-1 : 235 - 276
  • [34] Formability aspects of Fiber Metal Laminates
    de Jong, TW
    Sinke, J
    ADVANCING AFFORDABLE MATERIALS TECHNOLOGY, 2001, 33 : 751 - 759
  • [35] Interface analysis of fiber metal laminates
    Ostapiuk, Monika
    Surowska, Barbara
    Bienias, Jaroslaw
    COMPOSITE INTERFACES, 2014, 21 (04) : 309 - 318
  • [36] Applications of fiber-metal laminates
    Laliberté, JF
    Poon, C
    Straznicky, PV
    Fahr, A
    POLYMER COMPOSITES, 2000, 21 (04) : 558 - 567
  • [37] Recycling of Fiber-Metal Laminates
    Yang, Yongxiang
    Zhu, Guoliang
    Xiao, Yanping
    MANUFACTURING SCIENCE AND TECHNOLOGY, PTS 1-3, 2011, 295-297 : 2329 - 2332
  • [38] The bearing strength of fiber metal laminates
    van Rooijen, RGJ
    Sinke, J
    de Vries, TJ
    van der Zwaag, S
    JOURNAL OF COMPOSITE MATERIALS, 2006, 40 (01) : 5 - 19
  • [39] Preparation and Impact Resistance of Carbon Fiber Reinforced Metal Laminates Modified by Carbon Nanotubes
    Jia, Zehui
    Xu, Lingwei
    Huang, Shuangkai
    Xu, Haoran
    Zhang, Zhimo
    Cui, Xu
    PROCEEDINGS OF THE 8TH INTERNATIONAL CONFERENCE ON CIVIL ENGINEERING, 2022, : 306 - 313
  • [40] ON THE BEARING STRENGTH OF FIBER METAL LAMINATES
    SLAGTER, WJ
    JOURNAL OF COMPOSITE MATERIALS, 1992, 26 (17) : 2542 - 2566
12345