Introduction of nanoclay-modified fiber metal laminates

被引：37
|
作者：
Zakaria, Afshin Zamani [1 ]
Shelesh-nezhad, Karim [1 ]
机构：
[1] Univ Tabriz, Dept Mech Engn, Tabriz, Iran
来源：
ENGINEERING FRACTURE MECHANICS | 2017年 / 186卷
关键词：
Fiber metal laminate; Nanoclay reinforcement; Interfacial fracture toughness; Crack blunting; MECHANICAL-PROPERTIES; SURFACE TREATMENTS; BEHAVIOR; NANOCOMPOSITES; EXFOLIATION; IMPROVEMENT; PARTICLES; ADHESION;
D O I：
10.1016/j.engfracmech.2017.10.023
中图分类号：
O3 [力学];
学科分类号：
08 ; 0801 ;
摘要：
In this paper we aim to introduce benefits in modification of epoxy resin of fiber metal laminates (FMLs) with mineral nanoclay platelets. FMLs with carbon fibers and aluminum metal were attached by epoxy resin modified with various amounts of nanoclay. Elastic properties and interfacial toughness of fabricated FMLs were obtained for different percentages of nanoclay incorporation. Results reveal that the interfacial fracture toughness of the FML increases approximately double-fold by 0.5 wt% incorporation of nanoclay. This is attributed to the exfoliation of nanoclay (suggested by XRD) and toughening of the resin by crack blunting mechanism (suggested by SEM). (C) 2017 Elsevier Ltd. All rights reserved.
引用
收藏
页码：436 / 448
页数：13
相关论文
共 50 条
  • [21] The Effect of Ageing on Chemical and Strength Characteristics of Nanoclay-Modified Bitumen and Asphalt Mixture
    Omar, Hend Ali
    Katman, Herda Yati
    Bilema, Munder
    Ahmed, Mohamed Khalifa Ali
    Milad, Abdalrhman
    Yusoff, Nur Izzi Md
    APPLIED SCIENCES-BASEL, 2021, 11 (15):
  • [22] Effect of mixing parameters on the mechanical and thermal properties of a nanoclay-modified epoxy resin
    Bakar, M.
    Kostrzewa, M.
    Bialkowska, A.
    Pawelec, Z.
    HIGH PERFORMANCE POLYMERS, 2014, 26 (03) : 298 - 306
  • [23] Evaluation of Moisture Susceptibility of Nanoclay-Modified Asphalt Binders through the Surface Science Approach
    Hossain, Zahid
    Zaman, Musharraf
    Hawa, Takumi
    Saha, Mrinal C.
    JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 2015, 27 (10)
  • [24] Nanoclay-Modified Hyaluronic Acid Microspheres for Bone Induction by Sustained rhBMP-2 Delivery
    Zhang, Yi-ding
    Ma, Ao-bo
    Sun, Lu
    Chen, Jun-duo
    Hong, Guang
    Wu, Hong-kun
    MACROMOLECULAR BIOSCIENCE, 2024, 24 (02)
  • [25] J-integral evaluation of nanoclay-modified HDPE/PA6 microfibrillar composites
    Kelnar, Ivan
    Hodan, Jiri
    Kapralkova, Ludmila
    Kratochvil, Jaroslav
    Hromadkova, Jirina
    Kotek, Jiri
    POLYMER TESTING, 2017, 58 : 54 - 59
  • [26] Resin infusion analysis of nanoclay filled glass fiber laminates
    Kanny, K.
    Mohan, T. P.
    COMPOSITES PART B-ENGINEERING, 2014, 58 : 328 - 334
  • [27] Modified cure cycles for increased fatigue performance of fiber metal laminates
    Wiedemann, Johannes
    Mrzljak, Selim
    Koord, Josef
    Huehne, Christian
    Walther, Frank
    COMPOSITE STRUCTURES, 2025, 351
  • [28] Experimental investigation on the thermal and mechanical properties of nanoclay-modified adhesives used for bonding CFRP to concrete substrates
    Al-Safy, Rawaa
    Al-Mahaidi, Riadh
    Simon, George P.
    Habsuda, Jana
    CONSTRUCTION AND BUILDING MATERIALS, 2012, 28 (01) : 769 - 778
  • [29] A Study on the Rheological Performance of a Nanoclay-Modified Asphalt Binder Using the Brookfield Viscometer and Dynamic Shear Rheometer
    Ashish, Prabin Kumar
    Singh, Dharamveer
    Bohm, Siva
    RESILIENT RAILROAD MATERIALS AND STRUCTURES TO MITIGATE CLIMATE CHANGE, 2016, (268): : 9 - 15
  • [30] Effect of Analysis Procedures in Linear Amplitude Sweep Test on the Fatigue Resistance of Nanoclay-Modified Asphalt Binders
    Saboo, Nikhil
    Sukhija, Mayank
    JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 2021, 33 (01)
12345