Low-Temperature Synthesis of Calcium Hexaboride Powder via Transient Boron Carbide Formation

被引：21
|
作者：
Kakiage, Masaki [1 ]
Shiomi, Shuhei [1 ]
Yanase, Ikuo [1 ]
Kobayashi, Hidehiko [1 ]
机构：
[1] Saitama Univ, Grad Sch Sci & Engn, Dept Appl Chem, Sakura Ku, Saitama 3388570, Japan
来源：
JOURNAL OF THE AMERICAN CERAMIC SOCIETY | 2015年 / 98卷 / 09期
关键词：
ACID-GLYCERIN PRODUCT; PRECURSOR; CAB6;
D O I：
10.1111/jace.13771
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Calcium hexaboride (CaB6) powder was synthesized by carbothermal reduction using a low-temperature synthesis method for boron carbide (B4C) powder. A B4C precursor consisting of boron oxide (B2O3) and carbon components was prepared from a condensed boric acid (H3BO3)-poly(vinyl alcohol) (PVA) product by thermal decomposition in air, which was then mixed with calcium carbonate (CaCO3) powder. CaB6 was formed via the transient formation of calcium borate (Ca3B2O6) and B4C, which were in close contact owing to the finely dispersed B2O3/carbon structure of the B4C precursor. CaB6 powder with fine particles was synthesized by heat treatment at 1400 degrees C for 10h in an Ar flow.
引用
收藏
页码：2724 / 2727
页数：4
相关论文
共 50 条
  • [21] Boron-rich boron carbide from soot: a low-temperature green synthesis approach
    Swapna, M. S.
    Saritha Devi, H. V.
    Sankararaman, S.
    JOURNAL OF THE KOREAN CERAMIC SOCIETY, 2020, 57 (06) : 651 - 657
  • [22] Demonstrating low-temperature sintering of boron carbide powders
    Dai J.
    Lee W.
    Gomez E.D.
    Yamamoto N.
    International Journal of Ceramic Engineering and Science, 2019, 1 (04): : 178 - 184
  • [23] LOW-TEMPERATURE SYNTHETIC ROUTE OF BORON CARBIDE POWDERS
    Matovic, B.
    Babic, B.
    Volceanov, E.
    Boskovic, S.
    MODTECH 2010: NEW FACE OF TMCR, PROCEEDINGS, 2010, : 375 - 378
  • [24] Low-temperature Synthesis of Aluminium Carbide
    Li, Jiuqiang
    Zhang, Guangqing
    Liu, Dongsheng
    Ostrovski, Oleg
    ISIJ INTERNATIONAL, 2011, 51 (06) : 870 - 877
  • [25] LOW-TEMPERATURE SYNTHETIC ROUTE FOR HAFNIUM CARBIDE POWDER
    Matovic, Branko
    Babic, Biljana
    Bucevac, Dusan
    Cebela, Maria
    Maksimovic, Vesna
    Minovic, Tamara
    Miljkovic, Miroslav
    MODTECH 2012: NEW FACE OF T M C R, VOLS I AND II, 2012, : 537 - 540
  • [26] Synthesis of Calcium Hexaboride Powder via Boro/Carbothermal Reduction with a Gel Precursor
    Cakta, D. Yilmaz
    Koc, N.
    Turan, S.
    JOURNAL OF CERAMIC SCIENCE AND TECHNOLOGY, 2016, 7 (04): : 349 - 356
  • [27] Thermodynamic study of zirconium carbide synthesis via a low-temperature pyrovacuum method
    Arianpour, Farzin
    Kazemi, Faramarz
    Rezaie, Hamid Reza
    JOURNAL OF THE AUSTRALIAN CERAMIC SOCIETY, 2020, 56 (03) : 969 - 977
  • [28] Thermodynamic study of zirconium carbide synthesis via a low-temperature pyrovacuum method
    Farzin Arianpour
    Faramarz Kazemi
    Hamid Reza Rezaie
    Journal of the Australian Ceramic Society, 2020, 56 : 969 - 977
  • [29] Effect of boron oxide/carbon arrangement of precursor derived from condensed polymer-boric acid product on low-temperature synthesis of boron carbide powder
    Kakiage, Masaki
    Tahara, Naoki
    Yanagidani, Satomi
    Yanase, Ikuo
    Kobayashi, Hidehiko
    JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 2011, 119 (1390) : 422 - 425
  • [30] Effect of boron oxide/carbon arrangement of precursor derived from condensed polymer-boric acid product on low-temperature synthesis of boron carbide powder
    Department of Applied Chemistry, Graduate School of Science and Engineering, Saitama University, 255 Shimo-Okubo, Sakura-ku, Saitama 338-8570, Japan
    J Ceram Soc Jpn, 1390 (422-425):
12345