Studies on Effect of Fused Deposition Modelling Process Parameters on Ultimate Tensile Strength and Dimensional Accuracy of Nylon

被引：37
|
作者：
Basavaraj, C. K. [1 ]
Vishwas, M. [1 ]
机构：
[1] Siddaganga Inst Technol, Dept Ind Engn & Management, Tumkur 572103, Karnataka, India
来源：
INTERNATIONAL CONFERENCE ON ADVANCES IN MATERIALS AND MANUFACTURING APPLICATIONS (ICONAMMA-2016) | 2016年 / 149卷
关键词：
Fused deposition modelling; Nylon;
D O I：
10.1088/1757-899X/149/1/012035
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This paper discusses the process parameters for fused deposition modelling (FDM). Layer thickness, Orientation angle and shell thickness are the process variables considered for studies. Ultimate tensile strength, dimensional accuracy and manufacturing time are the response parameters. For number of experimental runs the taguchi's L9 orthogonal array is used. Taguchis S/N ratio was used to identify a set of process parameters which give good results for respective response characteristics. Effectiveness of each parameter is investigated by using analysis of variance. The material used for the studies of process parameter is Nylon.
引用
收藏
页数：11
相关论文
共 50 条
  • [41] Effect of Process Parameters on Hardness of Hip Joint Developed by Combining Fused Deposition Modelling and Investment Casting
    Singh, Rupinder
    Kapoor, Prince
    Singh, Sunpreet
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2015, 68 (05) : 723 - 728
  • [42] Effect of fused deposition modelling process parameters on mechanical properties of 3D printed parts
    Chadha, Abhinav
    Ul Haq, Mir Irfan
    Raina, Ankush
    Singh, Rana Ratna
    Penumarti, Narendra Babu
    Bishnoi, Manjeet Singh
    WORLD JOURNAL OF ENGINEERING, 2019, 16 (04) : 550 - 559
  • [43] On the correlation between process parameters and specific energy consumption in fused deposition modelling
    Lunetto, Vincenzo
    Priarone, Paolo C.
    Galati, Manuela
    Minetola, Paolo
    JOURNAL OF MANUFACTURING PROCESSES, 2020, 56 : 1039 - 1049
  • [44] Desirability function analysis approach for optimization of fused deposition modelling process parameters
    Tarigonda, Hariprasad
    Lakshmi Kala, Koyyagura
    Gnanaprakash, Peedinti
    Raghurami Reddy, Doddipalli
    Harsha Vardhan Reddy, Konareddy
    INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2023, 114 (10-11) : 940 - 946
  • [45] Fused deposition modelling process parameters influence on the mechanical properties of ABS: A review
    Khan, Imtiyaz
    Kumar, Neeraj
    MATERIALS TODAY-PROCEEDINGS, 2021, 44 : 4004 - 4008
  • [46] Optimizing Fused Deposition Molding Process Parameters for Improving Forming Strength of Polyetheretherketone
    Zhao G.
    Qin M.
    Liu Y.
    Qu X.
    Ding M.
    Tian L.
    Liu Y.
    Tian X.
    Liu Y.
    Liu, Yaxiong (yaxiongliu@163.com), 1600, Chinese Mechanical Engineering Society (56): : 216 - 222
  • [47] Process Capability Comparison of Fused Deposition Modelling for ABS and Fe-Nylon (6) Feedstock Filaments
    Singh, Rupinder
    Garg, Harish
    Singh, Sunpreet
    MATERIALS TODAY-PROCEEDINGS, 2018, 5 (02) : 4258 - 4268
  • [48] Effect of cold vapour treatment on geometric accuracy of fused deposition modelling parts
    Garg, Ashu
    Bhattacharya, Anirban
    Batish, Ajay
    RAPID PROTOTYPING JOURNAL, 2017, 23 (06) : 1226 - 1236
  • [49] Effect of process parameters on parts quality and process efficiency of fused deposition modeling
    Galetto, Maurizio
    Verna, Elisa
    Genta, Gianfranco
    COMPUTERS & INDUSTRIAL ENGINEERING, 2021, 156
  • [50] Prediction of Tensile Strength in Fused Deposition Modeling Process Using Artificial Neural Network Technique
    Manoharan, Karthic
    Chockalingam, K.
    Ram, S. Shankar
    3RD INTERNATIONAL CONFERENCE ON FRONTIERS IN AUTOMOBILE AND MECHANICAL ENGINEERING (FAME 2020), 2020, 2311
12345