Studies on Effect of Fused Deposition Modelling Process Parameters on Ultimate Tensile Strength and Dimensional Accuracy of Nylon

被引：37
|
作者：
Basavaraj, C. K. [1 ]
Vishwas, M. [1 ]
机构：
[1] Siddaganga Inst Technol, Dept Ind Engn & Management, Tumkur 572103, Karnataka, India
来源：
INTERNATIONAL CONFERENCE ON ADVANCES IN MATERIALS AND MANUFACTURING APPLICATIONS (ICONAMMA-2016) | 2016年 / 149卷
关键词：
Fused deposition modelling; Nylon;
D O I：
10.1088/1757-899X/149/1/012035
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This paper discusses the process parameters for fused deposition modelling (FDM). Layer thickness, Orientation angle and shell thickness are the process variables considered for studies. Ultimate tensile strength, dimensional accuracy and manufacturing time are the response parameters. For number of experimental runs the taguchi's L9 orthogonal array is used. Taguchis S/N ratio was used to identify a set of process parameters which give good results for respective response characteristics. Effectiveness of each parameter is investigated by using analysis of variance. The material used for the studies of process parameter is Nylon.
引用
收藏
页数：11
相关论文
共 50 条
  • [21] Fused deposition modelling: Effect of extrusion temperature on the accuracy of print
    Syrlybayev, Daniyar
    Perveen, Asma
    Talamona, Didier
    MATERIALS TODAY-PROCEEDINGS, 2021, 44 : 832 - 837
  • [22] Optimization of fused deposition modeling process parameters for dimensional accuracy using I-optimality criterion
    Mohamed, Omar Ahmed
    Masood, Syed Hasan
    Bhowmik, Jahar Lal
    MEASUREMENT, 2016, 81 : 174 - 196
  • [23] A review on composite materials and process parameters optimisation for the fused deposition modelling process
    Mohan, N.
    Senthil, P.
    Vinodh, S.
    Jayanth, N.
    VIRTUAL AND PHYSICAL PROTOTYPING, 2017, 12 (01) : 47 - 59
  • [24] The effect of process parameters on geometric deviations in 3D printing with fused deposition modelling
    Cristian Cappellini
    Yuri Borgianni
    Lorenzo Maccioni
    Chiara Nezzi
    The International Journal of Advanced Manufacturing Technology, 2022, 122 : 1763 - 1803
  • [25] The effect of process parameters on geometric deviations in 3D printing with fused deposition modelling
    Cappellini, Cristian
    Borgianni, Yuri
    Maccioni, Lorenzo
    Nezzi, Chiara
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2022, 122 (3-4): : 1763 - 1803
  • [26] Investigation on the influence of fused deposition modelling parameters on the mechanical properties of carbon fibre/nylon composites
    Palaniappan, Ashok Kumar
    Kumar, Krishnan Ravi
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, 2024, 238 (04) : 1916 - 1925
  • [27] Effect of process parameters on the void fraction and tensile strength of polyvinyl alcohol produced by fused granulate fabrication
    Lim, Adam
    Dehgahi, Shirin
    Mohiuddin, Abdullah
    Henein, Hani
    Qureshi, Ahmed Jawad
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2024, 134 (5-6): : 2233 - 2250
  • [28] Effects of process parameters on the quality of PLA products fabricated by fused deposition modeling (FDM): surface roughness and tensile strength
    Altan, Mirigul
    Eryildiz, Meltem
    Gumus, Beril
    Kahraman, Yusuf
    MATERIALS TESTING, 2018, 60 (05) : 471 - 477
  • [29] Optimization of fused deposition modeling (FDM) process parameters for flexural strength
    Dev, Saty
    Srivastava, Rajeev
    MATERIALS TODAY-PROCEEDINGS, 2021, 44 : 3012 - 3016
  • [30] Analysis of the surface roughness and dimensional accuracy capability of fused deposition modelling processes
    Pérez, CJL
    INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, 2002, 40 (12) : 2865 - 2881
12345