Studies on Effect of Fused Deposition Modelling Process Parameters on Ultimate Tensile Strength and Dimensional Accuracy of Nylon

被引：37
|
作者：
Basavaraj, C. K. [1 ]
Vishwas, M. [1 ]
机构：
[1] Siddaganga Inst Technol, Dept Ind Engn & Management, Tumkur 572103, Karnataka, India
来源：
INTERNATIONAL CONFERENCE ON ADVANCES IN MATERIALS AND MANUFACTURING APPLICATIONS (ICONAMMA-2016) | 2016年 / 149卷
关键词：
Fused deposition modelling; Nylon;
D O I：
10.1088/1757-899X/149/1/012035
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This paper discusses the process parameters for fused deposition modelling (FDM). Layer thickness, Orientation angle and shell thickness are the process variables considered for studies. Ultimate tensile strength, dimensional accuracy and manufacturing time are the response parameters. For number of experimental runs the taguchi's L9 orthogonal array is used. Taguchis S/N ratio was used to identify a set of process parameters which give good results for respective response characteristics. Effectiveness of each parameter is investigated by using analysis of variance. The material used for the studies of process parameter is Nylon.
引用
收藏
页数：11
相关论文
共 50 条
  • [1] Effect of fused deposition modelling (FDM) process parameters on tensile strength of carbon fibre PLA
    Rao, V. Durga Prasada
    Rajiv, P.
    Geethika, V. Navya
    MATERIALS TODAY-PROCEEDINGS, 2019, 18 : 2012 - 2018
  • [2] Investigation on the Effect of Process Parameters on Impact Strength of Fused Deposition Modelling Specimens
    Ramkumar, P. L.
    4TH INTERNATIONAL CONFERENCE ON MECHANICAL AND AERONAUTICAL ENGINEERING (ICMAE 2018), 2019, 491
  • [3] Ultimate Tensile Strength in Fused Deposition Modeling Considering Process Parameters of Flow Rate and Printing Head Speed
    Hou, Tao
    Huang, Tingting
    Sun, Fuqiang
    Wang, Shanggang
    12TH INTERNATIONAL CONFERENCE ON RELIABILITY, MAINTAINABILITY, AND SAFETY (ICRMS 2018), 2018, : 111 - 116
  • [4] INFLUENCE OF PROCESS PARAMETERS ON DIMENSIONAL ACCURACY OF PARTS MANUFACTURED USING FUSED DEPOSITION MODELLING TECHNOLOGY
    Gorski, Filip
    Kuczko, Wieslaw
    Wichniarek, Radoslaw
    ADVANCES IN SCIENCE AND TECHNOLOGY-RESEARCH JOURNAL, 2013, 7 (19): : 27 - 35
  • [5] Studies on Optimizing Process Parameters of Fused Deposition Modelling Technology for ABS
    Vishwas, M.
    Basavaraj, C. K.
    MATERIALS TODAY-PROCEEDINGS, 2017, 4 (10) : 10994 - 11003
  • [6] Significant factors in the dimensional accuracy of fused deposition modelling
    Pennington, RC
    Hoekstra, NL
    Newcomer, JL
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, 2005, 219 (E1) : 89 - 92
  • [7] Effect of the Printing Scenario on the Dimensional Accuracy and the Tensile Strength of Different Colored PLA Specimens Produced by Fused Deposition Modeling
    Cojocaru, Vasile
    Turiac, Raul Rusalin
    Frunzaverde, Doina
    Trisca, Gelu
    Bacescu, Nicoleta
    Marginean, Gabriela
    APPLIED SCIENCES-BASEL, 2024, 14 (17):
  • [8] Process parameter optimisation of fused deposition modelling for augmenting the strength of nylon-aramid PMC's
    Nagendra J.
    Srinath M.K.
    Bopanna K.D.
    Sujeeth Swamy S.
    Ravikumar M.
    Materials Today: Proceedings, 2023, 80 : 1352 - 1363
  • [9] Influence of fused deposition modelling process parameters on wear strength of carbon fibre PLA
    Srinivasan, R.
    Aravindkumar, N.
    Krishna, S. Aravind
    Aadhishwaran, S.
    George, John
    MATERIALS TODAY-PROCEEDINGS, 2020, 27 : 1794 - 1800
  • [10] Optimizing Fused Deposition Modelling Process Parameters for Medical Grade Polymethylmethacrylate Flexural Strength
    Obaeed, Nareen Hafidh
    Hamdan, Wisam K.
    ADVANCES IN SCIENCE AND TECHNOLOGY-RESEARCH JOURNAL, 2024, 18 (01) : 349 - 359
12345