Chemical interaction and activation phenomena in cold-sprayed Cu particles on Sn substrate

被引:3
|
作者
Ko, Kyung Hyun [1 ,2 ]
Lee, H. [1 ,2 ]
Jung, Sang-Hyun [3 ]
Ahn, Byungmin [1 ,2 ]
机构
[1] Ajou Univ, Dept Mat Sci & Engn, Suwon 16499, South Korea
[2] Ajou Univ, Dept Energy Syst Res, Suwon 16499, South Korea
[3] Agcy Def Dev, Res & Dev 4, Daejeon 34060, South Korea
基金
新加坡国家研究基金会;
关键词
Cold spray; Cu; Intermixing; Interfaces; Intermetallic compounds; COATINGS; DEPOSITION; MECHANISM; TEMPERATURE;
D O I
10.1016/j.matlet.2017.12.092
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
For the interactions at the interfaces of cold sprayed particles/substrates, the formation of intermetallic compounds (IMCs) of cold-sprayed Cu particles on a Sn substrate was investigated. Under room-temperature spray conditions, intermetallic layers (Cu6Sn5) were formed at the interfaces because of the high velocity collisions of the Cu particles. For the chemical interaction and activation phenomena, including intermixing at the interfaces, the bonding mechanism of the cold-sprayed coatings involved interlocking of the sprayed particles on the blasted substrates, as well as interactions between the particles and the substrate due to the high-velocity collisions (intermixing -> particles' interaction). (C) 2017 Elsevier B.V. All rights reserved.
引用
收藏
页码:161 / 164
页数:4
相关论文
共 50 条
  • [31] Microstructures and Thermal Properties of Cold-Sprayed Cu-Cr Composite Coatings
    Kikuchi, S.
    Yoshino, S.
    Yamada, M.
    Fukumoto, M.
    Okamoto, K.
    JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2013, 22 (06) : 926 - 931
  • [32] Deposition Behavior and Characteristics of Cold-Sprayed Cu-Cr Composite Deposits
    Xiang-kun Wu
    Xiang-lin Zhou
    Hua Cui
    Xiong Zheng
    Ji-shan Zhang
    Journal of Thermal Spray Technology, 2012, 21 : 792 - 799
  • [33] Microstructure and Wear Behavior of Cold-Sprayed Cu-BNNSs Composite Coating
    Wang, Yun
    Zhu, Yiqing
    Li, Ruitao
    Wang, Hongtao
    Tian, Lihui
    Li, Hua
    JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2021, 30 (06) : 1482 - 1492
  • [34] Deposition Behavior and Characteristics of Cold-Sprayed Cu-Cr Composite Deposits
    Wu, Xiang-kun
    Zhou, Xiang-lin
    Cui, Hua
    Zheng, Xiong
    Zhang, Ji-shan
    JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2012, 21 (05) : 792 - 799
  • [35] Characteristics and heat treatment of cold-sprayed Al-Sn binary alloy coatings
    Ning, Xian-Jin
    Kim, Jin-Hong
    Kim, Hyung-Jun
    Lee, Changhee
    APPLIED SURFACE SCIENCE, 2009, 255 (07) : 3933 - 3939
  • [36] Cold-Sprayed Cu-MoS2 and Its Fretting Wear Behavior
    Yinyin Zhang
    Sylvie Descartes
    Phuong Vo
    Richard R. Chromik
    Journal of Thermal Spray Technology, 2016, 25 : 473 - 482
  • [37] Correction to: Fretting Wear and Scratch Resistance of Cold-Sprayed Pure Cu and Ti
    Rodolpho F. Váz
    Alessio Silvello
    Pasquale D. Cavalière
    Sergi Dosta
    Irene G. Cano
    Laura Capodieci
    Antonella Rizzo
    Daniele Valerini
    Metallography, Microstructure, and Analysis, 2021, 10 : 514 - 514
  • [38] Microstructure and Wear Behavior of Cold-Sprayed Cu-BNNSs Composite Coating
    Yun Wang
    Yiqing Zhu
    Ruitao Li
    Hongtao Wang
    Lihui Tian
    Hua Li
    Journal of Thermal Spray Technology, 2021, 30 : 1482 - 1492
  • [39] Microstructures and Thermal Properties of Cold-Sprayed Cu-Cr Composite Coatings
    S. Kikuchi
    S. Yoshino
    M. Yamada
    M. Fukumoto
    K. Okamoto
    Journal of Thermal Spray Technology, 2013, 22 : 926 - 931
  • [40] Cold-Sprayed Cu-MoS2 and Its Fretting Wear Behavior
    Zhang, Yinyin
    Descartes, Sylvie
    Phuong Vo
    Chromik, Richard R.
    JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2016, 25 (03) : 473 - 482