Chemical interaction and activation phenomena in cold-sprayed Cu particles on Sn substrate

被引：3
|
作者：
Ko, Kyung Hyun [1 ,2 ]
Lee, H. [1 ,2 ]
Jung, Sang-Hyun [3 ]
Ahn, Byungmin [1 ,2 ]
机构：
[1] Ajou Univ, Dept Mat Sci & Engn, Suwon 16499, South Korea
[2] Ajou Univ, Dept Energy Syst Res, Suwon 16499, South Korea
[3] Agcy Def Dev, Res & Dev 4, Daejeon 34060, South Korea
来源：
MATERIALS LETTERS | 2018年 / 215卷
基金：
新加坡国家研究基金会;
关键词：
Cold spray; Cu; Intermixing; Interfaces; Intermetallic compounds; COATINGS; DEPOSITION; MECHANISM; TEMPERATURE;
D O I：
10.1016/j.matlet.2017.12.092
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
For the interactions at the interfaces of cold sprayed particles/substrates, the formation of intermetallic compounds (IMCs) of cold-sprayed Cu particles on a Sn substrate was investigated. Under room-temperature spray conditions, intermetallic layers (Cu6Sn5) were formed at the interfaces because of the high velocity collisions of the Cu particles. For the chemical interaction and activation phenomena, including intermixing at the interfaces, the bonding mechanism of the cold-sprayed coatings involved interlocking of the sprayed particles on the blasted substrates, as well as interactions between the particles and the substrate due to the high-velocity collisions (intermixing -> particles' interaction). (C) 2017 Elsevier B.V. All rights reserved.
引用
收藏
页码：161 / 164
页数：4
相关论文
共 50 条
  • [21] Influence of thermal properties and temperature of substrate on the quality of cold-sprayed deposits
    Arabgol, Z.
    Vidaller, M. Villa
    Assadi, H.
    Gaertner, F.
    Klassen, T.
    ACTA MATERIALIA, 2017, 127 : 287 - 301
  • [22] The Influence of the Substrate on the Deposition of Cold-Sprayed Titanium: An Experimental and Numerical Study
    D. K. Christoulis
    S. Guetta
    V. Guipont
    M. Jeandin
    Journal of Thermal Spray Technology, 2011, 20 : 523 - 533
  • [23] Focused ion beam micro-dissection of cold-sprayed particles
    King, P. C.
    Zahiri, S. H.
    Jahedi, M.
    ACTA MATERIALIA, 2008, 56 (19) : 5617 - 5626
  • [24] Effect of reinforcement particles on cold-sprayed Al-based coatings
    Li, Zhongsheng
    Wu, Hulin
    Ding, Xingxing
    Song, Kaiqiang
    Zhang, Min
    Li, Li
    Huang, Anwei
    Cong, Dalong
    SURFACE ENGINEERING, 2021, 37 (12) : 1570 - 1578
  • [25] Adhesion mechanism of cold-sprayed Sn coatings on carbon fiber reinforced plastics
    Sun, Jiayu
    Yamanaka, Kenta
    Zhou, Shaoyun
    Saito, Hiroki
    Ichikawa, Yuji
    Ogawa, Kazuhiro
    Chiba, Akihiko
    APPLIED SURFACE SCIENCE, 2022, 579
  • [26] Effect of annealing treatment on the microstructure and properties of cold-sprayed Cu coating
    Li, Wen-Ya
    Li, Chang-Jiu
    Liao, Hanlin
    JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2006, 15 (02) : 206 - 211
  • [27] Effect of annealing treatment on the microstructure and properties of cold-sprayed Cu coating
    Wen-Ya Li
    Chang-Jiu Li
    Hanlin Liao
    Journal of Thermal Spray Technology, 2006, 15 : 206 - 211
  • [28] Effects of gas temperature on bonding and deformation behavior of cold-sprayed Ni particles
    Zhang Huabing
    Zhang Junbao
    Shan Aidang
    Wu Jiansheng
    Song HongWei
    ACTA METALLURGICA SINICA, 2007, 43 (08) : 823 - 828
  • [29] Deposition Behavior and Microstructure of Cold-Sprayed Ni-Coated Al Particles
    Chen, Xiao
    Zhou, Hongkai
    Pi, Zhimin
    Huang, Zhiwu
    COATINGS, 2022, 12 (04)
  • [30] Deposition behavior of cold-sprayed metallic glass particles onto different substrates
    Henao, J.
    Bolelli, G.
    Concustell, A.
    Lusvarghi, L.
    Dosta, S.
    Cano, I. G.
    Guilemany, J. M.
    SURFACE & COATINGS TECHNOLOGY, 2018, 349 : 13 - 23
12345