Mechanical reliability of Cu cored solder ball in flip chip package under thermal shock test

被引：10

作者：

Jeong, Haksan ^{[1
]}

Min, Kyung Deuk ^{[1
]}

Lee, Choong-Jae ^{[1
]}

Kim, Jae-Ha ^{[1
]}

Jung, Seung-Boo ^{[1
]}

机构：

[1] Sungkyunkwan Univ, Sch Adv Mat Sci & Engn, 2066 Seobu Ro,KS002, Suwon 16419, South Korea

来源：

MICROELECTRONICS RELIABILITY | 2020年 / 112卷

基金：

新加坡国家研究基金会;

关键词：

Cu core solder ball; Sn-3.0Ag-0.5Cu; Thermal shock test; Finite element method; OSP; SN-AG; INTERFACIAL REACTIONS; CREEP-BEHAVIOR; SHEAR TEST; JOINTS; FAILURE; ELECTROMIGRATION; HISTORY;

D O I：

10.1016/j.microrel.2020.113918

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

A Cu-cored solder ball (CCSB) is often used as the interconnection material for 3D package. The CCSB has a Cu core surrounded by Sn-Ag-Cu alloy. The effect of the Cu core on mechanical reliability of the CCSB was investigated using thermal shock test. Microstructure and thermal shock reliability of the CCSB with organic solderability preservative (OSP) surface finish was compared with that of Sn-3.0wt.%Ag-0.5wt. %Cu (SAC) solder. The thermal shock test was performed in the temperature range of - 40 degrees C to 125 degrees C in compliance with JESD22-A104. Failure mechanism was analyzed by finite element method analysis. Average number of thermal shock cycles for the CCSB/OSP joints was 1.15 times higher than that for SAC/OSP joints. Maximum value of simulated plastic strain for the SAC/OSP joints was 1.25 times higher than that for the CCSB/OSP joints because the stand-off height of the CCSB/OSP joints could be maintained by the Cu core.

引用

页数：6

共 50 条

[21] Characteristics of Sn-2.5Ag flip chip solder joints under thermal shock test conditions
Kyoung Chun Yang
Seong Hyuk Lee
Jong-Min Kim
Young Ki Choi
Dave F. Farson
Young Eui Shin
Journal of Mechanical Science and Technology, 2009, 23 : 435 - 441
[22] Characteristics of Sn-2.5Ag flip chip solder joints under thermal shock test conditions
Yang, Kyoung Chun
Lee, Seong Hyuk
Kim, Jong-Min
Choi, Young Ki
Farson, Dave F.
Shin, Young Eui
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2009, 23 (02) : 435 - 441
[23] Strain behaviors of solder bump with underfill for flip chip package under thermal loading condition
Jae Kwak
Journal of Mechanical Science and Technology, 2014, 28 : 4899 - 4906
[24] Strain behaviors of solder bump with underfill for flip chip package under thermal loading condition
Kwak, Jae
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2014, 28 (12) : 4899 - 4906
[25] Thermal conduction analysis and characterization of solder bumps in flip chip package
Lu, Xiangning
Shi, Tielin
Xia, Qi
Liao, Guanglan
APPLIED THERMAL ENGINEERING, 2012, 36 : 181 - 187
[26] Solder Joint Reliability Performance of Flip Chip Molded Ball Grid Array (BGA) Package for Network/Communication Application
Kang, Eu Ong
Seong, Ling Too
Wei, Keat Loh
Peralta, Christopher
LayLing, Ong
Choi, Keng Chan
Eng, Hooi Yap
IEMT 2006: 31ST INTERNATIONAL CONFERENCE ON ELECTRONICS MANUFACTURING AND TECHNOLOGY, 2006, : 179 - +
[27] Flip chip solder joint reliability under harsh environment
Cheng, B
Wang, L
Zhang, Q
Gao, X
Xie, XM
Kempe, W
SOLDERING & SURFACE MOUNT TECHNOLOGY, 2003, 15 (03) : 15 - 20
[28] Reliability risk assessment of organic flip chip pin grid array package under thermal and mechanical loading conditions
Goh, TJ
MICRO MATERIALS, PROCEEDINGS, 2000, : 293 - 301
[29] Development of Novel Through Mold via in Package-on-Package Using Cu-Cored Solder Ball
Jang, Young Moon
Ko, Byoung-Ho
Jung, Hoon Sun
Jeong, Jin Wook
Choa, Sung-Hoon
NANOSCIENCE AND NANOTECHNOLOGY LETTERS, 2018, 10 (09) : 1192 - 1196
[30] Random Voids Generation and Effect of Thermal Shock Load on Mechanical Reliability of Light-Emitting Diode Flip Chip Solder Joints
Fan, Jiajie
Wu, Jie
Jiang, Changzhen
Zhang, Hao
Ibrahim, Mesfin
Deng, Liang
MATERIALS, 2020, 13 (01)

← 1 2 3 4 5 →