Influence of particles in Cu-Al2O3 system on fracture mechanism

被引：2
|
作者：
Besterci, M
Ivan, J
Kovac, L
机构：
[1] Slovak Acad Sci, Inst Mat Res, Kosice 04353, Slovakia
[2] SAS, Inst Mat & Mech Machines, Bratislava 83008, Slovakia
来源：
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2001年 / 319卷
关键词：
fracture mechanism; in situ tensile test in SEM; Cu-Al2O3; dispersion strengthened system;
D O I：
10.1016/S0921-5093(00)02030-X
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The influence of Al2O3 particles on fracture of the Cu-Al2O3 system is analyzed by 'in situ tensile test in SEM'. It has been shown, that tensile strain in the extrusion direction produced first micro cavities on matrix-particle interfaces due to decohesion of particles from the matrix. The cavities grow and coalesce first in the direction of rows of particles with growing strain, and then in direction perpendicular to the rows, leading to final fracture. The strain at fracture is dependent on Al2O3 particle volume fraction. The fracture mechanism is not dependent on Al2O3 particle volume fraction in the tested range. Model explaining the fracture mechanism was introduced. (C) 2001 Elsevier Science B.V. All rights reserved.
引用
收藏
页码：667 / 670
页数：4
相关论文
共 50 条
  • [21] PREPARATION OF COMPOSITE COATINGS OF CU-AL2O3 BY PRECIPITATION
    GUSEVA, IV
    MASHCHENKO, TS
    BORISENKO, AI
    INORGANIC MATERIALS, 1977, 13 (03) : 405 - 407
  • [22] The elaboration of composite materials from the Cu-Al2O3 system using CuO and Al2O3 powders
    Salomie, D.
    Pavel, C.
    Muresan, R.
    MATERIALS AND TECHNOLOGIES, 2007, 23 : 83 - 86
  • [23] PHYSICOMECHANICAL PROPERTIES OF Cu-Al2O3 ELECTROPLATING COMPOSITIONS
    Sakhnenko, M. D.
    Ovcharenko, O. O.
    Ved', M. V.
    Lyabuk, S. I.
    MATERIALS SCIENCE, 2015, 50 (05) : 646 - 652
  • [24] Rapid Fabrication of Cu-Al2O3 Nanocomposition Coatings
    Chen, Jinsong
    ADVANCED ENGINEERING MATERIALS, PTS 1-3, 2011, 194-196 : 480 - 483
  • [25] PLASTIC FORMING OF SINTERED CU-AL2O3 MATERIALS
    KACZMAR, J
    JANUS, A
    BANAS, B
    POWDER METALLURGY INTERNATIONAL, 1982, 14 (02): : 85 - 88
  • [26] THE ANALYSIS OF THE TRIBOLOGICAL PROPERTIES OF MULTIPLE STRENGTHENED NANOCOMPOSITE OF THE Cu-Al2O3 SYSTEM
    Korac, Marija
    Kamberovic, Zeljko
    Andic, Zoran
    Tasic, Milos
    Vujovic, Aleksandar
    METALLURGICAL & MATERIALS ENGINEERING, 2011, 17 (01) : 49 - 55
  • [27] Synthesis of Cu-Al2O3 nano composite powder
    Lee, DW
    Ha, GH
    Kim, BK
    SCRIPTA MATERIALIA, 2001, 44 (8-9) : 2137 - 2140
  • [28] THERMAL STABILITY OF CU-SIO2 AND CU-AL2O3 ALLOYS
    KOMATSU, N
    GRANT, NJ
    TRANSACTIONS OF THE METALLURGICAL SOCIETY OF AIME, 1962, 224 (04): : 705 - &
  • [29] Strengthening mechanism and hot deformation behavior of 20%Mo/Cu-Al2O3 composite
    Liu, Yong
    Sun, Yong-Wei
    Tian, Bao-Hong
    Feng, Jiang
    Zhang, Yi
    Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals, 2013, 23 (03): : 750 - 755
  • [30] Statistical and numerical analysis of unsteady hybrid nanoliquid flows over an elongating surface with oblique Lorentz force: A comparison of Cu-Al2O3/H2O, Cu-Al2O3/CH3OH and Cu-Al2O3/H2O-EG
    Nandi, Susmay
    Kumbhakar, Bidyasagar
    Seth, Gauri Shanker
    INTERNATIONAL JOURNAL OF MODERN PHYSICS B, 2024, 38 (17):
12345