Experimental investigation of effect of corrosion on injected fuel quantity and spray geometry in the diesel injection nozzles

被引：8

作者：

Karamangil, M. I. ^{[1
]}

Taflan, R. A. ^{[2
]}

机构：

[1] Uludag Univ, Fac Engn & Architecture, Dept Automot Engn, TR-16059 Bursa, Turkey

[2] Robert Bosch GmbH, Diesel Syst, Prod Dev Dept, TR-16159 Bursa, Turkey

来源：

FUEL | 2013年 / 112卷

关键词：

Corrosion; Diesel injector; Nozzle; Spray characteristic; VORTEX FLOW; CAVITATION; ENGINE; OILS;

D O I：

10.1016/j.fuel.2011.09.005

中图分类号：

TE [石油、天然气工业]; TK [能源与动力工程];

学科分类号：

0807 ; 0820 ;

摘要：

In this study, effect of corrosion on injected fuel quantity and spray geometry has been investigated experimentally in a piezo-driven common rail diesel injector. We performed the following examination steps on the nozzle parts for the cases prior to corrosion, after corrosion and after cleaning the corrosion material: (i) all important regions of the nozzle parts were photographed, (ii) microscopic pictures of the nozzle tip and interior of holes from outside have been taken with Scanning Electron Microscope, (iii) injection jets were photographed, (iv) injection quantities for different injection pressures and duration were determined and lastly, (v) hydraulic measurement of the nozzle was performed. Hydraulic measurement of the nozzle (in cm(3)/30 s@ 100 bar) showed that injection quantity decreased 26.26% after corrosion because of the corrosion deposits blocking nozzle hole and increased 5.68% after cleaning of deposits due to the enlargement of the holes. (C) 2011 Elsevier Ltd. All rights reserved.

引用

页码：531 / 536

页数：6

共 50 条

[21] Investigation of the effect of water droplet injection on condensation flow of different nozzles geometry
Lakzian, Esmail
Yazdani, Shima
Mobini, Reza
Abadi, Mohammad Hosein Moghimi-Esfand
Ramezani, Ali
Yahyazadeh, Mojtaba
Tabar, Mohsen Rashedi
EUROPEAN PHYSICAL JOURNAL PLUS, 2022, 137 (05):
[22] Investigation of the effect of water droplet injection on condensation flow of different nozzles geometry
Esmail Lakzian
Shima Yazdani
Reza Mobini
Mohammad Hosein Moghimi-Esfand Abadi
Ali Ramezani
Mojtaba Yahyazadeh
Mohsen Rashedi Tabar
The European Physical Journal Plus, 137
[23] Experimental investigation on effect of gas/spray interactions on transient diesel spray behaviors
Wang, Zhijian
Li, Yanfei
Li, Zhijie
Wang, Jingshan
Ma, Xiao
Shuai, Shijin
INTERNATIONAL JOURNAL OF ENGINE RESEARCH, 2023, 24 (08) : 3417 - 3427
[24] Experimental investigation of hydrogen port fuel injection in DI diesel engine
Saravanan, N.
Nagarajan, G.
Dhanasekaran, C.
Kalaiselvan, K. M.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2007, 32 (16) : 4071 - 4080
[25] Investigation on the influence of injection pressure and nozzle diameter on the spray of blended fuel in diesel engine
College of Mechanical Engineering, Guangxi University, Nanning 530004, China
不详
Neiranji Xuebao, 2013, 3 (200-207):
[26] Experimental investigation of the effect of orifices inclination angle in multihole diesel injector nozzles. Part 2-Spray characteristics
Payri, R.
Salvador, F. J.
De la Morena, J.
Pagano, V.
FUEL, 2018, 213 : 215 - 221
[27] Effect of fuel temperature and injection pressure on spray characteristics of sunflower oil and diesel
Li, Xiangrong, 1600, Chinese Society of Agricultural Engineering (30):
[28] Small Injection Amount Fuel Spray Characteristics Injected by HoleType Nozzle for D.I. Diesel Engine
Nishida, Keiya
Li, Kuichun
Matsuo, Takeru
Shimo, Daisuke
Zhang, Wu
SAE INTERNATIONAL JOURNAL OF ENGINES, 2015, 8 (01) : 277 - 287
[29] Investigation of cavitation phenomenon with different fuel temperatures in diesel nozzles
Cao, Tianyi
He, Zhixia
Wang, Jianquan
ADVANCES IN MECHANICAL ENGINEERING, 2023, 15 (10)
[30] Experimental investigation of the effects of diesel injection strategy on gasoline/diesel dual-fuel combustion
Ma, Shuaiying
Zheng, Zunqing
Liu, Haifeng
Zhang, Quanchang
Yao, Mingfa
APPLIED ENERGY, 2013, 109 : 202 - 212

← 1 2 3 4 5 →