Experimental investigation of effect of corrosion on injected fuel quantity and spray geometry in the diesel injection nozzles

被引：8

作者：

Karamangil, M. I. ^{[1
]}

Taflan, R. A. ^{[2
]}

机构：

[1] Uludag Univ, Fac Engn & Architecture, Dept Automot Engn, TR-16059 Bursa, Turkey

[2] Robert Bosch GmbH, Diesel Syst, Prod Dev Dept, TR-16159 Bursa, Turkey

来源：

FUEL | 2013年 / 112卷

关键词：

Corrosion; Diesel injector; Nozzle; Spray characteristic; VORTEX FLOW; CAVITATION; ENGINE; OILS;

D O I：

10.1016/j.fuel.2011.09.005

中图分类号：

TE [石油、天然气工业]; TK [能源与动力工程];

学科分类号：

0807 ; 0820 ;

摘要：

In this study, effect of corrosion on injected fuel quantity and spray geometry has been investigated experimentally in a piezo-driven common rail diesel injector. We performed the following examination steps on the nozzle parts for the cases prior to corrosion, after corrosion and after cleaning the corrosion material: (i) all important regions of the nozzle parts were photographed, (ii) microscopic pictures of the nozzle tip and interior of holes from outside have been taken with Scanning Electron Microscope, (iii) injection jets were photographed, (iv) injection quantities for different injection pressures and duration were determined and lastly, (v) hydraulic measurement of the nozzle was performed. Hydraulic measurement of the nozzle (in cm(3)/30 s@ 100 bar) showed that injection quantity decreased 26.26% after corrosion because of the corrosion deposits blocking nozzle hole and increased 5.68% after cleaning of deposits due to the enlargement of the holes. (C) 2011 Elsevier Ltd. All rights reserved.

引用

页码：531 / 536

页数：6

共 50 条

[11] Experimental investigation of the influence of fuel viscosity on the spray characteristics of diesel nozzle
Lu, Xing-Cai
Qiao, Xin-Qi
Chen, Jian
Huang, Zhen
Journal of Shanghai Jiaotong University (Science), 2007, 12 E (01) : 61 - 65
[12] Numerical and experimental investigation of direct injection fuel spray characteristics
Stavropoulos, M
Papadakis, G
Yianneskis, M
Williams, PA
O'Donoghue, S
INTERNATIONAL CONFERENCE ON COMPUTATIONAL AND EXPERIMENTAL METHODS IN RECIPROCATING ENGINES, 2000, 2000 (08): : 99 - 113
[13] Experimental investigation of the effect of duct structure geometry on macroscopic spray characteristics and air entrainment of duct fuel spray
Chen, Tao
An, Yanzhao
Shen, Shicheng
Shi, Hao
Pei, Yiqiang
Wang, Kun
FUEL, 2023, 339
[14] Investigation of cavitation in real size diesel injection nozzles
Badock, C
Wirth, R
Fath, A
Leipertz, A
INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW, 1999, 20 (05) : 538 - 544
[15] Spray structure in diesel fuel spray with high injection pressure
Dan, T.
Takagishi, S.
Ohishi, N.
Senda, J.
Fujimoto, H.
Nippon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B, 1996, 62 (597): : 2079 - 2085
[16] EXPERIMENTAL STUDY ON THE EFFECT OF CAVITATION ON PRESSURE FLUCTUATIONS IN OPTICAL DIESEL NOZZLES AND SPRAY CHARACTERISTICS
Cao, Tianyi
He, Zhixia
Zhang, Liang
Guan, Wei
Wang, Qian
ATOMIZATION AND SPRAYS, 2020, 30 (02) : 111 - 129
[17] A fuzzy Smith control of diesel fuel injection quantity
Li, YC
Gao, W
Liu, KP
Li, J
IVEC 2001: PROCEEDINGS OF THE IEEE INTERNATIONAL VEHICLE ELECTRONICS CONFERENCE, 2002, : 121 - 124
[18] Cavitation in Diesel Fuel Injector Nozzles and its Influence on Atomization and Spray
Sun, Yubiao
Guan, Zhiqiang
Hooman, Kamel
CHEMICAL ENGINEERING & TECHNOLOGY, 2019, 42 (01) : 6 - 29
[19] The Rating Factors in of Jet Fuel Formation in Channel Spray Nozzles Diesel
Goun, V. S.
Morozova, V. S.
Polyacko, V. L.
INTERNATIONAL CONFERENCE ON INDUSTRIAL ENGINEERING (ICIE 2017), 2017, 206 : 1678 - 1683
[20] The influence of cavitation on the internal flow and the spray characteristics in diesel injection nozzles
Payri, F
Bermúdez, V
Payri, R
Salvador, FJ
FUEL, 2004, 83 (4-5) : 419 - 431

← 1 2 3 4 5 →