Experimental investigation of effect of corrosion on injected fuel quantity and spray geometry in the diesel injection nozzles

被引：8

作者：

Karamangil, M. I. ^{[1
]}

Taflan, R. A. ^{[2
]}

机构：

[1] Uludag Univ, Fac Engn & Architecture, Dept Automot Engn, TR-16059 Bursa, Turkey

[2] Robert Bosch GmbH, Diesel Syst, Prod Dev Dept, TR-16159 Bursa, Turkey

来源：

FUEL | 2013年 / 112卷

关键词：

Corrosion; Diesel injector; Nozzle; Spray characteristic; VORTEX FLOW; CAVITATION; ENGINE; OILS;

D O I：

10.1016/j.fuel.2011.09.005

中图分类号：

TE [石油、天然气工业]; TK [能源与动力工程];

学科分类号：

0807 ; 0820 ;

摘要：

In this study, effect of corrosion on injected fuel quantity and spray geometry has been investigated experimentally in a piezo-driven common rail diesel injector. We performed the following examination steps on the nozzle parts for the cases prior to corrosion, after corrosion and after cleaning the corrosion material: (i) all important regions of the nozzle parts were photographed, (ii) microscopic pictures of the nozzle tip and interior of holes from outside have been taken with Scanning Electron Microscope, (iii) injection jets were photographed, (iv) injection quantities for different injection pressures and duration were determined and lastly, (v) hydraulic measurement of the nozzle was performed. Hydraulic measurement of the nozzle (in cm(3)/30 s@ 100 bar) showed that injection quantity decreased 26.26% after corrosion because of the corrosion deposits blocking nozzle hole and increased 5.68% after cleaning of deposits due to the enlargement of the holes. (C) 2011 Elsevier Ltd. All rights reserved.

引用

页码：531 / 536

页数：6

共 50 条

[1] Changes in fuel injection pressures and fuel spray quantity of marine diesel engines
Yamatani, Naohiro
Tezaki, Atsumu
Ishihara, Sotomi
Nakatani, Toshihiko
Nishii, Noriko
Mikami, Hiroshi
2017 17TH INTERNATIONAL CONFERENCE ON CONTROL, AUTOMATION AND SYSTEMS (ICCAS), 2017, : 1733 - 1738
[2] INVESTIGATION OF THE EFFECTS OF VORTEX-INDUCED STRING CAVITATION ON FLOW AND SPRAY CHARACTERISTICS WITHIN DIESEL FUEL INJECTION NOZZLES
Li, Chen
He, Zhixia
Guan, Wei
Guo, Genmiao
ATOMIZATION AND SPRAYS, 2024, 34 (01) : 37 - 56
[3] EQUIPMENT FOR FINISHING FUEL INJECTION NOZZLES IN QUANTITY PRODUCTION
PAVLOVICH, LA
RUSSIAN ENGINEERING JOURNAL, 1978, 58 (10): : 37 - 39
[4] AN EXPERIMENTAL INVESTIGATION OF DIESEL ENGINES FUEL INJECTION PRESSURE EFFECT ON POWER PERFORMANCE AND FUEL CONSUMPTION
Semin, S.
Abu Bakar, R.
Ismail, A. R.
Ali, I.
INTERNATIONAL JOURNAL OF ENGINEERING, 2009, 22 (01): : 91 - 97
[5] CORROSION-RESISTANCE FOR FUEL INJECTION NOZZLES
不详
ANTI-CORROSION METHODS AND MATERIALS, 1975, 22 (09) : 14 - 14
[6] Spray and mixture properties of evaporating fuel spray injected by hole-type direct injection diesel injector
Nishida, K.
Gao, J.
Manabe, T.
Zhang, Y.
INTERNATIONAL JOURNAL OF ENGINE RESEARCH, 2008, 9 (04) : 347 - 360
[7] Experimental study on the effect of nozzle geometry on string cavitation in real-size optical diesel nozzles and spray characteristics
Chen, Zhou
He, Zhixia
Shang, Weiwei
Duan, Lian
Zhou, Han
Guo, Genmiao
Guan, Wei
FUEL, 2018, 232 : 562 - 571
[8] An experimental investigation on manifold-injected hydrogen as a dual fuel for diesel engine system with different injection duration
Saravanan, N.
Nagarajan, G.
INTERNATIONAL JOURNAL OF ENERGY RESEARCH, 2009, 33 (15) : 1352 - 1366
[9] INVESTIGATION ON THE EFFECT OF INJECTION PRESSURES ON THE SPRAY CHARACTERISTICS FOR DIETHYL ETHER AND DIESEL FUEL AT DIFFERENT CHAMBER TEMPERATURES
Thulasi, Vijayakumar
Raj, R. Thundil Karuppa
FRONTIERS IN HEAT AND MASS TRANSFER, 2018, 10 (10):
[10] Experimental Investigation of the Influence of Fuel Viscosity on the Spray Characteristics of Diesel Nozzle
吕兴才
乔信起
陈剑
黄震
Journal of Shanghai Jiaotong University, 2007, (01) : 61 - 65

← 1 2 3 4 5 →