Selective surface texturing using electrolyte jet machining

被引：55
|
作者：
Kawanaka, Takuma [1 ]
Kato, Shigeki [1 ]
Kunieda, Masanori [1 ]
Murray, James W. [2 ]
Clare, Adam T. [2 ]
机构：
[1] Univ Tokyo, Dept Precis Engn, Bunkyo Ku, Tokyo 1138685, Japan
[2] Univ Nottingham, Inst Adv Mfg, Dept M3, Nottingham NG7 2RD, England
来源：
2ND CIRP CONFERENCE ON SURFACE INTEGRITY (CSI) | 2014年 / 13卷
关键词：
Texture; Electro chemical machining (ECM); Stainless steel; Electrolyte jet; Micro machining; Electrolyte jet machining (EJM);
D O I：
10.1016/j.procir.2014.04.058
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This paper describes development of a method for selective surface texturing using electrolyte jet machining. Electrolyte jet machining is an electrochemical machining method in which dissolution occurs selectively where the electrolyte jet hits the surface of the anode. This process is characterized by the ability to control the surface finish of the removed or added micro patterns by the current density in the electrolyte jet. Higher current density results in a mirror-like surface, while lower current density realizes significantly rough and complicated structures which are difficult to obtain with other machining processes. (C) 2014 The Authors. Published by Elsevier B.V.
引用
收藏
页码：345 / 349
页数：5
相关论文
共 50 条
  • [41] Machining of microchannel at SS316 surface using abrasive-assisted electrochemical jet machining
    Gao, Changshui (meecsgao@nuaa.edu.cn), 1600, Springer London (95): : 1 - 4
  • [42] Tool surface texturing in machining performance: state of art and recent developments
    Soni, Dheeraj Lal
    Jagadish
    Neigapula, Venkata Swamy Naidu
    INTERNATIONAL JOURNAL OF INTERACTIVE DESIGN AND MANUFACTURING - IJIDEM, 2025, 19 (03): : 1503 - 1531
  • [43] CO2 laser beam modulating for surface texturing machining
    Wan, Da-Ping
    Liu, Hong-Bin
    Wang, Yu-Ming
    Hu, De-Jin
    Gui, Zhen-Xing
    OPTICS AND LASER TECHNOLOGY, 2008, 40 (02): : 309 - 314
  • [44] Surface Texturing of Tribological Interfaces Using the Vibromechanical Texturing Method
    Greco, Aaron
    Raphaelson, Steven
    Ehmann, Kornel
    Wang, Q. Jane
    Lin, Chih
    JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 2009, 131 (06): : 0610051 - 0610058
  • [45] Energy consumption during surface texturing of AISI 1080 and AISI 52100 steels using CNC machining
    Zuluaga, Efrain
    Cuervo, Paula A.
    Valdes, Miyer
    Ardila, J. G.
    Rudas, Juan S.
    Toro, Alejandro
    INGENIERIA Y COMPETITIVIDAD, 2022, 24 (02):
  • [46] Experimental Exploration on Surface Roughness in Abrasive Water Jet machining using Response Surface Methodology
    Kumar, S. Venkata Ravi
    Muniappan, A.
    Bharathiraja, G.
    Karunagaran, N.
    3RD INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING (ICAME 2020), PTS 1-6, 2020, 912
  • [47] Workpiece surface laser regulation in laser-induced plasma electrolyte jet machining: Position, shape, and energy
    Wang, Fenglai
    Yu, Mingxin
    Li, Dong
    Zhang, Ce
    Du, Liqun
    OPTICS AND LASERS IN ENGINEERING, 2024, 182
  • [48] Fabrication of texturing tool to produce array of square holes for EDM by abrasive water jet machining
    Vijay Kumar Pal
    S. K. Choudhury
    The International Journal of Advanced Manufacturing Technology, 2016, 85 : 2061 - 2071
  • [49] Fabrication of texturing tool to produce array of square holes for EDM by abrasive water jet machining
    Pal, Vijay Kumar
    Choudhury, S. K.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2016, 85 (9-12): : 2061 - 2071
  • [50] Fabrication of texturing tool to produce array of square holes for EDM by abrasive water jet machining
    Pal, Vijay Kumar
    Choudhury, S.K.
    International Journal of Advanced Manufacturing Technology, 2016, 85 (9-12): : 2061 - 2071
12345