Selective surface texturing using electrolyte jet machining

被引：55
|
作者：
Kawanaka, Takuma [1 ]
Kato, Shigeki [1 ]
Kunieda, Masanori [1 ]
Murray, James W. [2 ]
Clare, Adam T. [2 ]
机构：
[1] Univ Tokyo, Dept Precis Engn, Bunkyo Ku, Tokyo 1138685, Japan
[2] Univ Nottingham, Inst Adv Mfg, Dept M3, Nottingham NG7 2RD, England
来源：
2ND CIRP CONFERENCE ON SURFACE INTEGRITY (CSI) | 2014年 / 13卷
关键词：
Texture; Electro chemical machining (ECM); Stainless steel; Electrolyte jet; Micro machining; Electrolyte jet machining (EJM);
D O I：
10.1016/j.procir.2014.04.058
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This paper describes development of a method for selective surface texturing using electrolyte jet machining. Electrolyte jet machining is an electrochemical machining method in which dissolution occurs selectively where the electrolyte jet hits the surface of the anode. This process is characterized by the ability to control the surface finish of the removed or added micro patterns by the current density in the electrolyte jet. Higher current density results in a mirror-like surface, while lower current density realizes significantly rough and complicated structures which are difficult to obtain with other machining processes. (C) 2014 The Authors. Published by Elsevier B.V.
引用
收藏
页码：345 / 349
页数：5
相关论文
共 50 条
  • [21] A MODEL FOR THE SURFACE TEXTURING OF STEEL ROLLS BY ELECTRODISCHARGE MACHINING
    MCGEOUGH, JA
    RASMUSSEN, H
    PROCEEDINGS OF THE ROYAL SOCIETY OF LONDON SERIES A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES, 1992, 436 (1896): : 155 - 164
  • [22] Process Localization at the Electrolyte Jet Machining for Additive Manufacturing
    Zhao, Yangpei
    Fan, Hui
    INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE, 2020, 15 (12): : 12491 - 12503
  • [23] Mirror-like finishing by electrolyte jet machining
    Kawanaka, Takuma
    Kunieda, Masanori
    CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2015, 64 (01) : 237 - 240
  • [24] Improving material removal rate in electrolyte jet machining using stepped cathode tool
    Chen, Jiajie
    Wang, Qingqing
    Qu, Ningsong
    Li, Hansong
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2025, 137 (1-2): : 645 - 657
  • [25] Surface Texturing of Polyimide Composite by Micro-Ultrasonic Machining
    Qu, N. S.
    Zhang, T.
    Chen, X. L.
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2018, 27 (03) : 1369 - 1377
  • [26] Laser surface texturing of a heterogeneous material: control of the machining quality
    Vincent, C.
    Monteil, G.
    Barriere, T.
    Gelin, J. C.
    10TH ESAFORM CONFERENCE ON MATERIAL FORMING, PTS A AND B, 2007, 907 : 1205 - +
  • [27] Surface Texturing of Polyimide Composite by Micro-Ultrasonic Machining
    N. S. Qu
    T. Zhang
    X. L. Chen
    Journal of Materials Engineering and Performance, 2018, 27 : 1369 - 1377
  • [28] Surface modification using a developed hybrid process of electrical discharge machining and abrasive jet machining
    Lin, Yan-Cherng
    Chuang, Fang-Pin
    Hwang, Lih-Ren
    Wang, A-Cheng
    INTERNATIONAL JOURNAL OF SURFACE SCIENCE AND ENGINEERING, 2015, 9 (2-3) : 176 - 188
  • [29] PHENOMENA AT SURFACE ABRASIVE JET MACHINING
    Slatineanu, Laurentiu
    Radovanovic, Miroslav
    Braha, Vasile
    Potarniche, Stefan
    Coteata, Margareta
    Grigoras , Irina
    MODTECH 2011: NEW FACE OF T.M.C.R., VOL I AND II, 2011, : 1013 - 1016
  • [30] Selective surface texturing using femtosecond pulsed laser induced forward transfer
    Tan, B
    Venkatakrishnan, K
    Tok, KG
    APPLIED SURFACE SCIENCE, 2003, 207 (1-4) : 365 - 371
12345