Selective surface texturing using electrolyte jet machining

被引：55
|
作者：
Kawanaka, Takuma [1 ]
Kato, Shigeki [1 ]
Kunieda, Masanori [1 ]
Murray, James W. [2 ]
Clare, Adam T. [2 ]
机构：
[1] Univ Tokyo, Dept Precis Engn, Bunkyo Ku, Tokyo 1138685, Japan
[2] Univ Nottingham, Inst Adv Mfg, Dept M3, Nottingham NG7 2RD, England
来源：
2ND CIRP CONFERENCE ON SURFACE INTEGRITY (CSI) | 2014年 / 13卷
关键词：
Texture; Electro chemical machining (ECM); Stainless steel; Electrolyte jet; Micro machining; Electrolyte jet machining (EJM);
D O I：
10.1016/j.procir.2014.04.058
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This paper describes development of a method for selective surface texturing using electrolyte jet machining. Electrolyte jet machining is an electrochemical machining method in which dissolution occurs selectively where the electrolyte jet hits the surface of the anode. This process is characterized by the ability to control the surface finish of the removed or added micro patterns by the current density in the electrolyte jet. Higher current density results in a mirror-like surface, while lower current density realizes significantly rough and complicated structures which are difficult to obtain with other machining processes. (C) 2014 The Authors. Published by Elsevier B.V.
引用
收藏
页码：345 / 349
页数：5
相关论文
共 50 条
  • [1] Texturing of Glass Surface using Micro-slurry Jet Machining Process
    Yamaguchi, Hajime
    Sakata, Koshi
    Kasamura, Keiji
    Nakashima, Yuta
    Nakanishi, Yoshitaka
    FRONTIERS IN MECHANICAL ENGINEERING-SWITZERLAND, 2021, 7 (07):
  • [2] Surface texturing on SiC by multiphase jet machining with microdiamond abrasives
    Shi, Liping
    Fang, Yu
    Dai, Qingwen
    Huang, Wei
    Wang, Xiaolei
    MATERIALS AND MANUFACTURING PROCESSES, 2018, 33 (13) : 1415 - 1421
  • [3] Generating complicated surface with electrolyte jet machining
    Natsu, Wataru
    Ikeda, Tomone
    Kunieda, Masanori
    PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 2007, 31 (01): : 33 - 39
  • [4] Fabrication of surface microstructures by mask electrolyte jet machining
    Wu, Ming
    Liu, Jiangwen
    He, Junfeng
    Chen, Xiaolei
    Guo, Zhongning
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2020, 148
  • [5] Electrolyte Jet Machining of Titanium Alloys Using Novel Electrolyte Solutions
    Clare, Adam (adam.clare@nottingham.ac.uk), 1600, Elsevier B.V., Netherlands (42):
  • [6] Electrolyte Jet Machining of Titanium Alloys using Novel Electrolyte Solutions
    Speidel, Alistair
    Mitchell-Smith, Jonathon
    Walsh, Darren A.
    Hirsch, Matthias
    Clare, Adam
    18TH CIRP CONFERENCE ON ELECTRO PHYSICAL AND CHEMICAL MACHINING (ISEM XVIII), 2016, 42 : 367 - 372
  • [7] Manufacturing dimpled saw wires using electrolyte jet machining
    Kunieda M.
    Ooshiro S.
    Iwamoto N.
    Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering, 2010, 76 (05): : 572 - 576
  • [8] SOME INVESTIGATIONS ON SURFACE TEXTURING ON MONEL 400 USING PHOTOCHEMICAL MACHINING
    Mudigonda, Sadaiah
    Patil, Deepakkumar H.
    PROCEEDINGS OF THE ASME 10TH INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE, 2015, VOL 1, 2015,
  • [9] Study on micro electrolyte jet machining
    Ooshiro, S.
    Kunieda, M.
    Natsu, W.
    PROCEEDINGS OF THE 15TH INTERNATIONAL SYMPOSIUM ON ELECTROMACHINING, 2007, : 387 - 392
  • [10] Experimental and Numerical Investigations on Fabrication of Surface Microstructures Using Mask Electrolyte Jet Machining and Duckbill Nozzle
    Wu, Ming
    Hazak Arshad, Muhammad
    Kumar Saxena, Krishna
    Reynaerts, Dominiek
    Guo, Zhongning
    Liu, Jiangwen
    JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 2023, 145 (05):
12345