The Preliminary Study Of Machinability During Milling Of Titanium Alloy (Ti-6Al-4V)

被引：0

作者：

Serboi, Claudia ^{[1
]}

Velicu, Stefan ^{[1
]}

Darnis, Philippe ^{[2
]}

Laheurte, Raynald ^{[2
]}

Ionescu, Cristian ^{[3
]}

机构：

[1] Univ Politehn Bucuresti, Bucharest, Romania

[2] Univ Bordeaux 1, F-33405 Talence, France

[3] SC HESPER SA, Bucharest, Romania

来源：

OPTIMIZATION OF THE MECHANICAL ENGINEERING, MANUFACTURING SYSTEMS, ROBOTICS AND AEROSPACE | 2012年 / 186卷

关键词：

titanium alloys; machinability; cutting forces; machining parameters;

D O I：

10.4028/www.scientific.net/AMM.186.200

中图分类号：

V [航空、航天];

学科分类号：

08 ; 0825 ;

摘要：

Titanium and its alloys have found wide application in the aerospace, biomedical and automotive industries owing to their good strength-to weight ratio and high corrosion resistance. However, these alloys have very poor machinability, which is attributed to their inherent high strength maintained at elevated temperature and low thermal conductivity leading to high cutting temperatures. This paper presents the findings of an experimental investigation into the effects of cutting speed, feed rate and depth of cut when milling titanium alloy Ti-6Al-4V. The cutting forces were the response variables investigated. This experimental investigation is translated into a mathematical model of cutting forces designed on the basis of the results obtained from this research.

引用

页码：200 / +

页数：2

共 50 条

[31] Electrochemical boriding of titanium alloy Ti-6Al-4V
Alaeddine, Kaouka
Khedidja, Benarous
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2019, 8 (06): : 6407 - 6412
[32] Numerical Study of Laser Cutting of Titanium Alloy (TI-6Al-4V)
Mittal, Vipin
Sharma, Pawan
Patel, Vijay Kr
Pandey, Vikas
Kumar, Vinod
DYNAMICS OF MACHINES AND MECHANISMS, INDUSTRIAL RESEARCH, 2014, 592-594 : 579 - 583
[33] Experimental Study of Machining Characteristics of Titanium Alloy (Ti-6Al-4V)
Sharma, Arunil
Sharma, Mukund Dutt
Sehgal, Rakesh
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, 2013, 38 (11) : 3201 - 3209
[34] Influence of microstructure and hardness on machinability of heat-treated titanium alloy Ti-6Al-4V in end milling with polycrystalline diamond tools
Abbasi, Sarwar Ali
Feng, Pingfa
Ma, Yuan
Zhang, Jianfu
Yu, Dingwen
Wu, Zhijun
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2016, 86 (5-8): : 1393 - 1405
[35] Influence of microstructure and hardness on machinability of heat-treated titanium alloy Ti-6Al-4V in end milling with polycrystalline diamond tools
Sarwar Ali Abbasi
Pingfa Feng
Yuan Ma
Jianfu Zhang
Dingwen Yu
Zhijun Wu
The International Journal of Advanced Manufacturing Technology, 2016, 86 : 1393 - 1405
[36] Wear mechanism analysis in milling of Ti-6Al-4V alloy
Jaffery, Syed H. I.
Khan, Mushtaq
Sheikh, Nadeem A.
Mativenga, Paul
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2013, 227 (08) : 1148 - 1156
[37] Machinability behaviour of biocompatible Ti-6Al-4V ELI titanium alloy under flood cooling environment
Mishra, Rasmi Ranjan
Kumar, Ramanuj
Sahoo, Ashok Kumar
Panda, Amlana
MATERIALS TODAY-PROCEEDINGS, 2020, 23 : 536 - 540
[38] Effects of Coolants on Improving Machining Parameters while Machinability Titanium Alloy (Ti-6Al-4V): A Review
Ali, Moaz H.
Balasubramanian, R.
Mohamed, Bashir
Khidhir, Basim A.
MECHANICAL AND AEROSPACE ENGINEERING, PTS 1-7, 2012, 110-116 : 1657 - +
[39] A MACHINABILITY STUDY OF COATED INSERTS FOR TURNING TI-6AL-4V
Khawarizmi, Ryan M.
Guo, Yang
Bieler, Thomas R.
Kwon, Patrick
PROCEEDINGS OF ASME 2022 17TH INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE, MSEC2022, VOL 2, 2022,
[40] Machinability Study on Dry Drilling of Titanium Alloy Ti-6Al-4V using L9 orthoganal array
Shetty, Pradeep Kumar
Shetty, Raviraj
Shetty, Divakara
Rehaman, Fazalul N.
Jose, Tony K.
INTERNATIONAL CONFERENCE ON ADVANCES IN MANUFACTURING AND MATERIALS ENGINEERING (ICAMME 2014), 2014, 5 : 2605 - 2614

← 1 2 3 4 5 →