The Effects of Be on mechanical properties of Al-Mg2Si in Situ Composite

被引：0
|
作者：
Azarbarmas, Mortaza [1 ]
Emamy, Masoud [1 ]
Rasizadeh, Jafar [1 ]
Alipour, Mohammad [1 ]
Karamouz, Mostafa [1 ]
机构：
[1] Univ Tehran, Sch Met & Mat, Ctr Excellence High Performance Mat, Tehran, Iran
来源：
TMS2011 SUPPLEMENTAL PROCEEDINGS, VOL 3: GENERAL PAPER SELECTIONS | 2011年
关键词：
Al/Mg2Si composite; Beryllium; Modification; Tensile properties; TENSILE PROPERTIES; MICROSTRUCTURE;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The influence of Be content on the mechanical properties of Al-15%Mg2Si composite was investigated. The results showed that with the addition of 0.5%Be, the ultimate tensile strength (UTS) and elongation values reached from 252 to 280 MPa and 2.2 to 3.8%, respectively. A study of the specimen's fracture surfaces via scanning electron microscope (SEM) showed that adding Be increase the number of fine dimples that is consistent with results from tensile tests.
引用
收藏
页码：873 / 881
页数：9
相关论文
共 50 条
  • [41] The effect of Zr on the microstructure and tensile properties of hot-extruded Al-Mg2Si composite
    Bahrami, A.
    Razaghian, A.
    Emamy, M.
    Khorshidi, R.
    MATERIALS & DESIGN, 2012, 36 : 323 - 330
  • [42] Optimizing the Microstructure of Al-Mg2Si In Situ Composite Made by Centrifugal Casting to Increase the Sliding Wear Resistance
    Zeinali, Ali
    Rajabi, Masoud
    Rahimipour, Mohammad Reza
    Shabani, Mohsen Ostad
    JOURNAL OF FAILURE ANALYSIS AND PREVENTION, 2023, 23 (06) : 2416 - 2438
  • [43] Optimizing the Microstructure of Al-Mg2Si In Situ Composite Made by Centrifugal Casting to Increase the Sliding Wear Resistance
    Ali Zeinali
    Masoud Rajabi
    Mohammad Reza Rahimipour
    Mohsen Ostad Shabani
    Journal of Failure Analysis and Prevention, 2023, 23 : 2416 - 2438
  • [44] Effect of Isothermal Reheating at Different Holding Times on The Microstructure of Al-Mg2Si In-situ Cast Composite
    Malekan, A.
    Emamy, M.
    Ghiasinejad, J.
    Ghorbani, M. R.
    NUMIFORM 2010, VOLS 1 AND 2: DEDICATED TO PROFESSOR O. C. ZIENKIEWICZ (1921-2009), 2010, 1252 : 669 - 672
  • [45] Microstructure and mechanical properties of diffusion bonded Al/Mg2Si metal matrix in situ composite
    Nami, H.
    Halvaee, A.
    Adgi, H.
    Hadian, A.
    MATERIALS & DESIGN, 2010, 31 (08) : 3908 - 3914
  • [46] Effect of Ce Inoculation on Microstructure and Mechanical Properties of in situ Al–20%Mg2Si Composite
    Yingmin Li
    Tongyu Liu
    Shengyuan Chen
    Yuyan Ren
    International Journal of Metalcasting, 2019, 13 : 331 - 336
  • [47] Effect of cooling rate on growth and transformation of primary Mg2Si in Al-Mg2Si in situ composites
    Wang, Dongtao
    Zhang, Haitao
    Guo, Cheng
    Wu, Hailin
    Cui, Jianzhong
    JOURNAL OF MATERIALS RESEARCH, 2018, 33 (20) : 3458 - 3465
  • [48] The study of Li effect on the microstructure and tensile properties of cast Al-Mg2Si metal matrix composite
    Khorshidi, R.
    Raouf, A. Honarbakhsh
    Emamy, M.
    Campbell, J.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2011, 509 (37) : 9026 - 9033
  • [49] Improvement of Microstructure and Mechanical Properties of Near-Eutectic Al-Mg2Si Alloys by Eu Addition
    Jin, Yinling
    Fang, Hongze
    Wang, Shu
    Chen, Ruirun
    Su, Yanqing
    Guo, Jingjie
    ADVANCED ENGINEERING MATERIALS, 2021, 23 (04)
  • [50] Effect of Ce Inoculation on Microstructure and Mechanical Properties of in situ Al-20%Mg2Si Composite
    Li, Yingmin
    Liu, Tongyu
    Chen, Shengyuan
    Ren, Yuyan
    INTERNATIONAL JOURNAL OF METALCASTING, 2019, 13 (02) : 331 - 336
12345