The Effects of Be on mechanical properties of Al-Mg2Si in Situ Composite

被引：0
|
作者：
Azarbarmas, Mortaza [1 ]
Emamy, Masoud [1 ]
Rasizadeh, Jafar [1 ]
Alipour, Mohammad [1 ]
Karamouz, Mostafa [1 ]
机构：
[1] Univ Tehran, Sch Met & Mat, Ctr Excellence High Performance Mat, Tehran, Iran
来源：
TMS2011 SUPPLEMENTAL PROCEEDINGS, VOL 3: GENERAL PAPER SELECTIONS | 2011年
关键词：
Al/Mg2Si composite; Beryllium; Modification; Tensile properties; TENSILE PROPERTIES; MICROSTRUCTURE;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The influence of Be content on the mechanical properties of Al-15%Mg2Si composite was investigated. The results showed that with the addition of 0.5%Be, the ultimate tensile strength (UTS) and elongation values reached from 252 to 280 MPa and 2.2 to 3.8%, respectively. A study of the specimen's fracture surfaces via scanning electron microscope (SEM) showed that adding Be increase the number of fine dimples that is consistent with results from tensile tests.
引用
收藏
页码：873 / 881
页数：9
相关论文
共 50 条
  • [31] Enhanced ductility in an Al-Mg2Si in situ composite processed by ECAP using a modified BC route
    Bian, Liping
    Liang, Wei
    Xie, Guoyin
    Zhang, Wenli
    Xue, Jinbo
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (09): : 3463 - 3467
  • [32] Modification of Cast Al-Mg2Si Metal Matrix Composite by Li
    Hadian, R.
    Emamy, M.
    Campbell, J.
    METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2009, 40 (06): : 822 - 832
  • [33] Development of a Cast Al-Mg2Si-Si In Situ Composite: Microstructure, Heat Treatment, and Mechanical Properties
    E. Georgatis
    A. Lekatou
    A. E. Karantzalis
    H. Petropoulos
    S. Katsamakis
    A. Poulia
    Journal of Materials Engineering and Performance, 2013, 22 : 729 - 741
  • [34] Development of a Cast Al-Mg2Si-Si In Situ Composite: Microstructure, Heat Treatment, and Mechanical Properties
    Georgatis, E.
    Lekatou, A.
    Karantzalis, A. E.
    Petropoulos, H.
    Katsamakis, S.
    Poulia, A.
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2013, 22 (03) : 729 - 741
  • [35] Precipitation sequence in a SiC/Al-Mg2Si alloy composite material
    S. Ikeno
    K. Matsuda
    S. Rengakuji
    Y. Uetani
    Journal of Materials Science, 2001, 36 : 1921 - 1929
  • [36] The influence of pure Na on the microstructure and tensile properties of Al-Mg2Si metal matrix composite
    Emamy, M.
    Khorshidi, R.
    Raouf, A. Honarbakhsh
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (13-14): : 4337 - 4342
  • [37] Precipitation sequence in a SiC/Al-Mg2Si alloy composite material
    Ikeno, S
    Matsuda, K
    Rengakuji, S
    Uetani, Y
    JOURNAL OF MATERIALS SCIENCE, 2001, 36 (08) : 1921 - 1929
  • [38] Tailoring the mechanical properties of hypereutectic in situ Al-Mg2Si composites via hybrid TiB2 reinforcement and hot extrusion
    Moazami, Mohammad Rasool
    Razaghian, Ahmad
    Mirzadeh, Hamed
    Emamy, Massoud
    ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING, 2022, 22 (02)
  • [39] Effect of Excess Mg on the Microstructure and Mechanical Properties of Al-Mg2Si High Pressure Die Casting Alloys
    Yan, Feng
    Ji, Shouxun
    Fan, Zhongyun
    LIGHT METALS TECHNOLOGY 2013, 2013, 765 : 64 - 68
  • [40] Effect of Mg2Si Concentration on the Dry Sliding Wear Behavior of Al-Mg2Si Composite
    Biswas, Prosanta
    Mondal, Manas Kumar
    Mandal, Durbadal
    JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 2019, 141 (08):
12345