The Effects of Be on mechanical properties of Al-Mg2Si in Situ Composite

被引：0
|
作者：
Azarbarmas, Mortaza [1 ]
Emamy, Masoud [1 ]
Rasizadeh, Jafar [1 ]
Alipour, Mohammad [1 ]
Karamouz, Mostafa [1 ]
机构：
[1] Univ Tehran, Sch Met & Mat, Ctr Excellence High Performance Mat, Tehran, Iran
来源：
TMS2011 SUPPLEMENTAL PROCEEDINGS, VOL 3: GENERAL PAPER SELECTIONS | 2011年
关键词：
Al/Mg2Si composite; Beryllium; Modification; Tensile properties; TENSILE PROPERTIES; MICROSTRUCTURE;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The influence of Be content on the mechanical properties of Al-15%Mg2Si composite was investigated. The results showed that with the addition of 0.5%Be, the ultimate tensile strength (UTS) and elongation values reached from 252 to 280 MPa and 2.2 to 3.8%, respectively. A study of the specimen's fracture surfaces via scanning electron microscope (SEM) showed that adding Be increase the number of fine dimples that is consistent with results from tensile tests.
引用
收藏
页码：873 / 881
页数：9
相关论文
共 50 条
  • [1] Mechanical properties of a hot deformed Al-Mg2Si in-situ composite
    Zamani, Rashadoddin
    Mirzadeh, Hamed
    Emamy, Massoud
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018, 726 : 10 - 17
  • [2] Microstructure optimization and mechanical properties of lightweight Al-Mg2Si in-situ composite
    Chen, Xiaoxian
    Liu, Hao
    Zhan, Yongzhong
    Tang, Hongqun
    INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2016, 107 (09) : 842 - 850
  • [3] Machinability characteristics, thermal and mechanical properties of Al-Mg2Si in-situ composite with bismuth
    Barzani, Mohsen Marani
    Farahany, Saeed
    Songmene, Victor
    MEASUREMENT, 2017, 110 : 263 - 274
  • [4] Microstructure evolution and mechanical properties of In Situ hypereutectic Al-Mg2Si composites
    Bhandari, Rahul
    Mallik, Manab
    Mondal, Manas Kumar
    PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS (ICAM 2019), 2019, 2162
  • [5] Microstructure and mechanical properties of Al-Mg2Si composite fabricated in-situ by vibrating cooling slope
    Saffari, Shaya
    Akhlaghi, Farshad
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2018, 28 (04) : 604 - 612
  • [6] Modification of Al-Mg2Si In-Situ Composite by Boron
    Azarbarmas, Mortaza
    Emamy, Masoud
    Rassizadehghani, Jafar
    Alipour, Mohammad
    Karamouz, Mostafa
    TMS2011 SUPPLEMENTAL PROCEEDINGS, VOL 2: MATERIALS FABRICATION, PROPERTIES, CHARACTERIZATION, AND MODELING, 2011, : 843 - 850
  • [7] Correlating the microstructure to mechanical properties and wear behavior of an accumulative back extruded Al-Mg2Si in-situ composite
    Ebrahimi, M.
    Zarei-Hanzaki, A.
    Abedi, H. R.
    Azimi, M.
    Mirjavadi, S. S.
    TRIBOLOGY INTERNATIONAL, 2017, 115 : 199 - 211
  • [8] Effects of Boron on Microstructure and Tensile Properties of Al-Mg2Si Metal Matrix Composite
    Azarbarmas, M.
    Emamy, M.
    Alipour, M.
    Karamouz, M.
    NUMIFORM 2010, VOLS 1 AND 2: DEDICATED TO PROFESSOR O. C. ZIENKIEWICZ (1921-2009), 2010, 1252 : 1073 - 1083
  • [9] Effect of modified ECAP route on microstructure and mechanical property of Al-Mg2Si in-situ composite
    Bian, Li-Ping
    Liang, Wei
    Ma, Jian
    Zhang, Wen-Li
    Xue, Jin-Bo
    Wang, Hong-Xia
    Zhao, Xing-Guo
    Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals, 2011, 21 (08): : 1841 - 1846
  • [10] Microstructure and Mechanical Property of an ECAP Processed Al-Mg2Si in Situ Composite by Using a Combined Route
    Bian, Liping
    Liang, Wei
    Zhang, Wenli
    ADVANCED ENGINEERING MATERIALS, PTS 1-3, 2011, 194-196 : 1720 - 1723
12345