Al2O3-Mo cutting tools for machining hardened stainless steel

被引：40
|
作者：
Broniszewski, K. [1 ]
Wozniak, J. [1 ]
Czechowski, K. [2 ]
Jaworska, L. [2 ]
Olszyna, A. [1 ]
机构：
[1] Warsaw Univ Technol, Fac Mat Sci & Engn, PL-02507 Warsaw, Poland
[2] Inst Adv Mfg Technol, PL-30011 Krakow, Poland
来源：
WEAR | 2013年 / 303卷 / 1-2期
关键词：
Alumina ceramics-molybdenum composite; Cutting tool; Machining; Solid lubricants; R-CURVE BEHAVIOR;
D O I：
10.1016/j.wear.2013.03.002
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
This article presents the result of the study of the properties of alumina ceramics-molybdenum cutting tools in dry machining of hardened steel. Dry machining process leads to the oxidation of molybdenum particles and formation of MoO3 and MoO2 oxides. The MoO3 oxide structure is very similar to that of graphite and serves the function of a solid lubricant, thereby a frictional coefficient between cutting edge and the machined material is decreased. Produced alumina ceramics-molybdenum composites are characterized with self-lubricating properties in dry machining condition. In addition, composite cutting tools edges wear uniformly without cracking and chipping and have the average tool life of over 2 h. (C) 2013 Elsevier B.V. All rights reserved.
引用
收藏
页码：87 / 91
页数：5
相关论文
共 50 条
  • [31] On machining of hardened AISI D2 steel with PCBN tools
    Arsecularatne, JA
    Zhang, LC
    Montross, C
    Mathew, P
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2006, 171 (02) : 244 - 252
  • [32] Experimental study on cutting performance of microwave sintered Ti(C, N)/Al2O3 cermet tool in the dry machining of hardened steel
    Zhang, Yong
    Cheng, Yu
    Hu, Hanpeng
    Yin, Zengbin
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2017, 91 (9-12): : 3933 - 3941
  • [33] Experimental study on cutting performance of microwave sintered Ti(C, N)/Al2O3 cermet tool in the dry machining of hardened steel
    Yong Zhang
    Yu Cheng
    Hanpeng Hu
    Zengbin Yin
    The International Journal of Advanced Manufacturing Technology, 2017, 91 : 3933 - 3941
  • [34] The possibility of producing graded Al2O3-Mo, Al2O3-Cu, Al2O3-W composites using CSC method
    Wachowski, M.
    Kaszuwara, W.
    Miazga, A.
    Konopka, K.
    Zygmuntowicz, J.
    BULLETIN OF THE POLISH ACADEMY OF SCIENCES-TECHNICAL SCIENCES, 2019, 67 (02) : 179 - 184
  • [35] Stainless Takes Machining stainless steel for aerospace applications requires cutting tools that are tough, polished and sharp
    Richter, Alan
    Cutting Tool Engineering, 2021, 73 (03): : 16 - 21
  • [36] Self-lubricating behaviors of Al2O3/TiB2ceramic tools in dry high-speed machining of hardened steel
    Deng, JX
    Cao, TK
    Liu, LL
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2005, 25 (07) : 1073 - 1079
  • [37] A Comparison Study on Wear Behaviors of Mo and Al2O3-Mo Coatings from RT to 300 degrees C
    Yan, Jianhui
    Guo, Yuanjun
    Wang, Yi
    Zhou, Peng
    Qiu, Jingwen
    LUBRICANTS, 2018, 6 (02)
  • [38] Wear patterns of polycrystalline cubic boron nitride cutting tools when machining hardened bearing steel
    Benga, Gabriel
    Stanimir, Alexandru
    ANNALS OF DAAAM FOR 2007 & PROCEEDINGS OF THE 18TH INTERNATIONAL DAAAM SYMPOSIUM: INTELLIGENT MANUFACTURING & AUTOMATION: FOCUS ON CREATIVITY, RESPONSIBILITY, AND ETHICS OF ENGINEERS, 2007, : 73 - 74
  • [39] The effect of cutting fluids on the machining of hardened AISI 4340 steel
    Avila, RF
    Abrao, AM
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2001, 119 (1-3) : 21 - 26
  • [40] On Machining behaviour of various cutting Inserts: A review on hardened steel
    Khatai, Saswat
    Sahoo, Ashok Kumar
    Kumar, Ramanuj
    Panda, Amlana
    MATERIALS TODAY-PROCEEDINGS, 2022, 62 : 3485 - 3492
12345