Al2O3-Mo cutting tools for machining hardened stainless steel

被引：40
|
作者：
Broniszewski, K. [1 ]
Wozniak, J. [1 ]
Czechowski, K. [2 ]
Jaworska, L. [2 ]
Olszyna, A. [1 ]
机构：
[1] Warsaw Univ Technol, Fac Mat Sci & Engn, PL-02507 Warsaw, Poland
[2] Inst Adv Mfg Technol, PL-30011 Krakow, Poland
来源：
WEAR | 2013年 / 303卷 / 1-2期
关键词：
Alumina ceramics-molybdenum composite; Cutting tool; Machining; Solid lubricants; R-CURVE BEHAVIOR;
D O I：
10.1016/j.wear.2013.03.002
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
This article presents the result of the study of the properties of alumina ceramics-molybdenum cutting tools in dry machining of hardened steel. Dry machining process leads to the oxidation of molybdenum particles and formation of MoO3 and MoO2 oxides. The MoO3 oxide structure is very similar to that of graphite and serves the function of a solid lubricant, thereby a frictional coefficient between cutting edge and the machined material is decreased. Produced alumina ceramics-molybdenum composites are characterized with self-lubricating properties in dry machining condition. In addition, composite cutting tools edges wear uniformly without cracking and chipping and have the average tool life of over 2 h. (C) 2013 Elsevier B.V. All rights reserved.
引用
收藏
页码：87 / 91
页数：5
相关论文
共 50 条
  • [21] Application of non-commercial ceramic cutting tool in machining of hardened stainless steel
    de Paula, M. A.
    de Sousa, T. A.
    Souza, J. V. C.
    Alves, M. C. S.
    Ribeiro, M. V.
    MATERIALS RESEARCH EXPRESS, 2019, 6 (04)
  • [22] Chemical Processes in Al2O3-Mo and Al2O3-W systems in a weakly reducing atmosphere
    Fedorov, V. A.
    Kostomarov, D. V.
    Antonov, E. V.
    CRYSTALLOGRAPHY REPORTS, 2014, 59 (01) : 132 - 136
  • [23] CUTTING MECHANISM DURING MACHINING OF HARDENED STEEL
    MATSUMOTO, Y
    BARASH, MM
    LIU, CR
    MATERIALS SCIENCE AND TECHNOLOGY, 1987, 3 (04) : 299 - 305
  • [24] Chemical Processes in Al2O3-Mo and Al2O3-W systems in a weakly reducing atmosphere
    V. A. Fedorov
    D. V. Kostomarov
    E. V. Antonov
    Crystallography Reports, 2014, 59 : 132 - 136
  • [25] The effect of tool wear on tool life of alumina-based ceramic cutting tools while machining hardened martensitic stainless steel
    Kumar, AS
    Durai, AR
    Sornakumar, T
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2006, 173 (02) : 151 - 156
  • [26] In situ synthesis mechanism of Al2O3-Mo nanocomposite by ball milling process
    Heidarpour, A.
    Karimzadeh, E.
    Enayati, M. H.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2009, 477 (1-2) : 692 - 695
  • [27] Use of Castor Oil as Cutting Fluid in Machining of Hardened Stainless Steel with Minimum Quantity of Lubricant
    Elmunafi, Mohamed Handawi Saad
    Kurniawan, D.
    Noordin, M. Y.
    12TH GLOBAL CONFERENCE ON SUSTAINABLE MANUFACTURING - EMERGING POTENTIALS, 2015, 26 : 408 - 411
  • [28] Solid state reactions in the Al-MoO3 system for the synthesis of Al2O3-Mo aluminide composites
    Marín, J
    Lisboa, J
    Rojas, P
    Rojas, R
    Parada, P
    Reyes, J
    García, D
    REVISTA DE METALURGIA, 2002, 38 (01) : 23 - 29
  • [29] Temperature evaluation of cutting tools during machining of hardened bearing steel using polycrystalline cubic boron nitride and ceramic cutting tools
    Abrao, AM
    Aspinwall, DK
    MATERIALS SCIENCE AND TECHNOLOGY, 1997, 13 (05) : 445 - 450
  • [30] Temperature evaluation of cutting tools during machining of hardened bearing steel using polycrystalline cubic boron nitride and ceramic cutting tools
    Abrao, A. M.
    Aspinwall, D. K.
    Materials Science and Technology, 13 (05):
12345