Al2O3-Mo cutting tools for machining hardened stainless steel

被引：40
|
作者：
Broniszewski, K. [1 ]
Wozniak, J. [1 ]
Czechowski, K. [2 ]
Jaworska, L. [2 ]
Olszyna, A. [1 ]
机构：
[1] Warsaw Univ Technol, Fac Mat Sci & Engn, PL-02507 Warsaw, Poland
[2] Inst Adv Mfg Technol, PL-30011 Krakow, Poland
来源：
WEAR | 2013年 / 303卷 / 1-2期
关键词：
Alumina ceramics-molybdenum composite; Cutting tool; Machining; Solid lubricants; R-CURVE BEHAVIOR;
D O I：
10.1016/j.wear.2013.03.002
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
This article presents the result of the study of the properties of alumina ceramics-molybdenum cutting tools in dry machining of hardened steel. Dry machining process leads to the oxidation of molybdenum particles and formation of MoO3 and MoO2 oxides. The MoO3 oxide structure is very similar to that of graphite and serves the function of a solid lubricant, thereby a frictional coefficient between cutting edge and the machined material is decreased. Produced alumina ceramics-molybdenum composites are characterized with self-lubricating properties in dry machining condition. In addition, composite cutting tools edges wear uniformly without cracking and chipping and have the average tool life of over 2 h. (C) 2013 Elsevier B.V. All rights reserved.
引用
收藏
页码：87 / 91
页数：5
相关论文
共 50 条
  • [1] Al2O3-V cutting tools for machining hardened stainless steel
    Broniszewski, K.
    Wozniak, J.
    Kostecki, M.
    Czechowski, K.
    Jaworska, L.
    Olszyna, A.
    CERAMICS INTERNATIONAL, 2015, 41 (10) : 14190 - 14196
  • [2] Cutting performance and wear resistance of Al2O3/TiC/CaF2@Al2O3 ceramic tools in dry machining of hardened steel
    Guo, Niansheng
    Chen, Zhaoqiang
    Xiao, Guangchun
    Li, Qi
    Zhang, Shuai
    Yi, Mingdong
    Zhang, Jingjie
    Xu, Chonghai
    JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 2021, 129 (12) : 697 - 706
  • [3] STAINLESS STEEL MACHINING WITH NANOCOATED DURATOMIC™ CUTTING TOOLS
    Gutakovskis, V
    Bunga, G.
    Torims, T.
    PROCEEDINGS OF THE 7TH INTERNATIONAL CONFERENCE OF DAAAM BALTIC INDUSTRIAL ENGINEERING, VOLS 1 AND 2, 2010, : 171 - 176
  • [4] MACHINING WITH AL2O3-SIC-WHISKER CUTTING TOOLS
    BILLMAN, ER
    MEHROTRA, PK
    SHUSTER, AF
    BEEGHLY, CW
    AMERICAN CERAMIC SOCIETY BULLETIN, 1988, 67 (06): : 1016 - 1019
  • [5] THERMOPHYSICAL PROPERTIES OF AL2O3-MO CERMET SYSTEM
    OSIPOV, VA
    KYAR, KA
    ATOMNAYA ENERGIYA, 1972, 32 (02): : 162 - +
  • [6] Wear behaviour of Al2O3-Mo and Al2O3-Nb composites
    de Portu, Goffredo
    Guicciardi, Stefano
    Melandri, Cesare
    Monteverde, Frederic
    WEAR, 2007, 262 (11-12) : 1346 - 1352
  • [7] PROCESSING AND PROPERTIES OF Al2O3-Mo COMPOSITE MATERIALS
    Pietrzak, Katarzyna
    Kalinski, Dariusz
    Chmielewski, Marcin
    COMPOSITES THEORY AND PRACTICE, 2008, 8 (02): : 109 - 113
  • [8] The impact of mechanical properties on the cutting performance of Al2O3-based ceramic cutting tools for green turning of hardened steel
    Ni, Xiuying
    Zhao, Jun
    Gong, Feng
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2025, 239 (1-2) : 174 - 184
  • [9] MECHANICAL PROPERTIES AND FRACTOGRAPHY OF AL2O3-MO GRADIENT ARMOR
    ACQUAVIV.SJ
    KATZ, RN
    RANKIN, DT
    AMERICAN CERAMIC SOCIETY BULLETIN, 1971, 50 (04): : 458 - &
  • [10] Experimental study on the cutting performance of microwave sintered Al2O3/TiC ceramic tool in the machining of hardened steel
    Cheng, Yu
    Hu, Hanpeng
    Sun, Shishuai
    Yin, Zengbin
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2016, 55 : 39 - 46
12345